Whirlpool/Whirlpool_Thumb/RGYMB1A8.gif
See part 1 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Control Panel

★★★★★
★★★★★
7 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11699799
Manufacturer Part Number W10775980
Manufactured by Whirlpool
Product Description

Control Panel Specifications

Black in color.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool.
Part# W10775980 replaces these:
AP5961570, 8531266, 8531269, 8531538, 8564488, 8564566, 8574001, W10757836
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Pat
    November 24, 2017
    I have stainless steel kitchaid dishwasher. The entire front of the dishwasher is stainless steel. The control panel only shows up along the top of the door. The dishwasher setting light turn on but the start button light does not and the selection light turn off after a minute. Looks like the control board is the problem. The ps11699799 control board comes up as the replacement part but i looks like its meant to fit a door with a black panel showing on the outside of the door. Will this part actually fit under the stainless door covering ?
    For model number KUDS01FLSS3
    Hi Pat, Thank you for the question.Part number PS11699799 is just the plastic panel not the control board. For the board you will need to order Part Number: PS11746562. Good luck with the repair!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Leo
    August 2, 2018
    The operation control buttons on the upper right door of our kitchen aid are in sad shape. One button is missing. What is the correct part number.
    For model number KUDS01FLSS6
    Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11699799. The buttons are included with this control panel. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Matthew
    September 1, 2021
    We just ordered a control panel for our kitchen aid DW and was wondering where we can find installation instructions for the panel. Thanks matt
    For model number KUDS01FLSS6
    Hello Matthew, Thank you for the question. Here is a Repair Story from a previous customer that may help. Good luck with the repair! " Turned off the power at the breaker; took the screws out of the door panel; the control panel was already loose; I took the lock mechanism off the panel, and then removed the electric bundle panel from the control panel; the only thing left was the circuit board, which I removed, and the wires to it were in a clip all together; I clipped the wires to the new circuit board, replaced it in the panel slot, then clipped in the wire bundle; the lock mechanism fit right where it was supposed to, then I replaced all the screws in the door panel , starting at the top where the control panel was; I turned the power back on, then turned on the dishwasher- it worked just like new. This was a fairly easy fix for about $150; that would have been the service charge and time alone for a repairman, not including the marked up price of the parts. PartSelect was a lifesaver."

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Neeraj
    July 8, 2019
    The operation control buttons on the upper right door of our KitchenAid are broken. What is the correct part number. For model number kud101flss6
    For model number KUD101FLSS6
    Hello Neeraj, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10064580. Thank you for your inquiry, good luck with this repair!

    Was this helpful?
    Thank you for voting!
    Susan
    November 29, 2019
    Some of my operating buttons on the top of the dishwasher have come off. What part number do I need to order a replacement.
    For model number KUDS01FLBL5
    Hi Susan, the replacement buttons are part of control panel PS11699799. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.4 / 5.0, 10 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Control panel buttons were worn out, circuit board shorted out
        Turned off the power at the breaker; took the screws out of the door panel; the control panel was already loose; I took the lock mechanism off the panel, and then removed the electric bundle panel from the control panel; the only thing left was the cicuit board, which I removed, and the wires to it were in a clip all together; I clipped the wires to the new cicuit board, replaced it in the panel slot, then clipped in the wire bundle; the lock mechanism fit right where it was supposed to, then I replaced all the screws in the door panel , starting at the top where the control panel was; I turned the power back on, then turned on the dishwasher- it worked just like new. This was a fairly easy fix for about $150; that would have been the service charge and time alone for a repairman, not including the marked up price of the parts. PartSelect was a lifesaver.
        Other Parts Used:
        Electronic Control Board
        • Peter from Colleyville, TX
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        35 of 43 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        the "normal" button cover cracked allowing water to seep in and damage the switch
        Unplug the dishwasher. Remove the screws holding the stainless lining to the outer door panel. Unplug the various connections. remove the control panel by pushing small plastic cleats outward (they are spring loaded). Remove the printed circuit board by pushing one holding tab to realase then tilting the board out. Remove the ribbon cable by sliding it off the circuit board. Now reverse the process. Attach the ribbon cable to new circuit board, snap in the circuit board to the control panel (ribbon behind), reattach all electrical connectors, reassemble the door "sandwich". Somewhere in there you also need to remove then snap back the door lock assembly. This is a simple repair with no fancy connectors or tools. Repair service wanted $400 plus two service calls (one to diagnose, one to install). My total about $120. I am a klutz re: repairs.
        • Edward from Westminster, CO
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          1- 2 hours
        10 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Control selection Pad not functioning
        1st important: Make sure to turn off electricity from the dishwasher I did this from my circuit breaker to insure safety. Removed the front panel of the dishwasher, disconnected the control panel & the Electronic Control Board. Removed the 2 items. The parts arrived very promptly as promised, connectected the wires & installed. As long as someone is mechanically inclined & savy with electronics shouldn't run into any problems. Dishwasher now working as good as new. Saved significantly, previously priced out repairman & parts would have been more then double the costs incurred & saved $1000.00 if I would have purchased a new dishwasher of equal value.
        Other Parts Used:
        Electronic Control Board
        • Lynn from Leo, IN
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers, Socket set
        8 of 10 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        broken control panel buttons
        I looked it up on youtube and also saw the written explanation on Parts Select
        • William from Great Neck, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        4 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        controlpanel buttons and circuit board were damaged
        loosened screws, slid out black panel, removed (unclipped) 2 electronic panels and placed them in new panel. Unplugged, removed and replaced circuit board. Plugged in new circuit board. Slid panel back into position and fastened screws.
        Now it as good as new...
        • David from Windermere, FL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Control panel worn out. Start button would not always work
        So I have never done anything like this before, but I figured the worst I could do was no worse than an nonworking dishwasher, and I did not want to spend $150 and wait a week or two for a repair man...so what heck...First I watched a video on Youtube found here: https://www.youtube.com/watch?v=T4G0IiHLZhk
        Then....
        TURN OFF THE CIRCUIT BREAKER TO THE DISHWASHER IN YOUR BREAKER BOX. VERIFY IT IS OFF BY TRYING TO START THE DISHWASHER.
        1. I removed all of the perimeter screws on the inside of the door and pulled the decorator panel up and off.
        2. I removed the screws that held the latching mechanism.
        3. Surprise. What I saw did not look like what was in the video. There was not a nice neat R&R control module with a wire harness to unplug. Instead I was looking at 3 circuit boards.
        4. I was to pop up the control panel on my left. The larger one on the right requires a long screwdriver to lever under the right side, flex the plastic housing until the pins holding the board came free, and then i slid out. The final board came free with pinching the clasp that held it.
        5. I left all of these linked together and undid no wires.
        6. As a unit I was able to pop all 3 into the proper places on the new panel. It is quite obvious what goes where as it is a perfect copy of the original.
        7. Then reattach the latching mechanism.
        8. Slide the door front on so that the bottom sides go inside the retaing rails.
        9. Reattach all screws.in their proper places.
        10. Voila. It worked much to my amazement.
        • Steven from BENICIA, CA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        control panel buttons were worn out
        Replaced the plastic control panel- need to remove the PCB's which can be tricky not to damage them
        Other Parts Used:
        Silverware Basket - Gray
        • Frank from Hummelstown, PA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers, Socket set
        2 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The control panel buttons worn.
        Removed the door cover. Took off the inside of the door by removing screws. Removed and replaced the control panel. Replace the inside of the door. Reinstalled the door cover.
        • Robert from OXFORD, MD
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Would not start, lights on panel and switches not functioning.
        The unit was not turning on and I was not getting normal switch indicator lights. After consulting the on-line PartsSelect trouble shooting/repair text, I replace these two components:
        WP8270168 Control Board (switch panel) -core returned) PS11745530
        WP8270168 Control Board (circuit box) -core returned PS11746562
        Now I get the full panel of lights for cycles and control.
        The “clean” indicator remained lighted (flashing) at the end of the first wash cycle and I cannot clear it by using the book procedure (“cancel” button). Nor does it extinguish after unplugging the dishwasher and, after a wait, plugging it in. It appears that the sensor for the “clean” step is not clearing. I cannot get it to do any wash cycle.
        -----------------------------------
        I talked to the customer service person at PartsSelect at 8888951555 and, incredibly, she keyed in to my statement that I could not get the circuit to reset when unpowered and read from a script the way to get the circuits to reset (sent the text to me since it was complex). That was the solution except that I still have to figure out how to get the "clean" light to deenergize but I am able to do wash cycles now.
        Other Parts Used:
        Electronic Control Board
        • John from BENICIA, CA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Button on the control panel worn off.
        Turned off the circuit breaker. Removed the door screws and lifted the front of the door off (screws were square so I needed a special allen wrench. Removed the door latch screws. Popped off the control panel plastic unit. Removed the three circuit boards...needed a little bending on the plastic holding pins...that's ok since you discard the old panel. Put the 3 circuit boards back in place on the new panel. Positioned the new panel. Replaced the outside wood piece and put the screws back in the door and door latch. Turned the circuit breaker back on. Worked like a champ.
        • Robert from OXFORD, MD
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers, Wrench set
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          7 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            7
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11699799
              Manufacturer Part Number: W10775980
              Brand
              Model Number
              Description
              KitchenAid
              KUDS01FLBL0
              Dishwasher
              KitchenAid
              KUDS01FLBL1
              Dishwasher
              KitchenAid
              KUDS01FLBL2
              Dishwasher
              KitchenAid
              KUDS01FLBL3
              Dishwasher
              KitchenAid
              KUDS01FLBL5
              Dishwasher
              KitchenAid
              KUDS01FLBL6
              Dishwasher
              KitchenAid
              KUDS01FLBL7
              Dishwasher
              Whirlpool
              KUDS01FLBS0
              Dishwasher
              KitchenAid
              KUDS01FLBT0
              Dishwasher
              KitchenAid
              KUDS01FLBT1
              Dishwasher
              KitchenAid
              KUDS01FLBT2
              Dishwasher
              KitchenAid
              KUDS01FLBT3
              Dishwasher
              KitchenAid
              KUDS01FLBT5
              Dishwasher
              KitchenAid
              KUDS01FLBT6
              Dishwasher
              KitchenAid
              KUDS01FLBT7
              Dishwasher
              KitchenAid
              KUDS01FLSS0
              Dishwasher
              KitchenAid
              KUDS01FLSS1
              Dishwasher
              KitchenAid
              KUDS01FLSS2
              Dishwasher
              KitchenAid
              KUDS01FLSS3
              Dishwasher
              KitchenAid
              KUDS01FLSS5
              Dishwasher
              KitchenAid
              KUDS01FLSS6
              Dishwasher
              KitchenAid
              KUDS01FLSS7
              Dishwasher
              KitchenAid
              KUDS01FLWH0
              Dishwasher
              KitchenAid
              KUDS01FLWH1
              Dishwasher
              KitchenAid
              KUDS01FLWH2
              Dishwasher
              KitchenAid
              KUDS01FLWH3
              Dishwasher
              KitchenAid
              KUDS01FLWH5
              Dishwasher
              KitchenAid
              KUDS01FLWH6
              Dishwasher
              KitchenAid
              KUDS01FLWH7
              Dishwasher

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service