Average Repair Rating: 2.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Suspension rods were worn; washer is 10+ years old
Replaced the suspension rods, suspension rod supports, main drive belt, tub centering springs, water supply hoes, and washer drain hose. Taped new front suspension rods to side of tub to ensure that they did not slide down when raising the washer off its back from the floor. Had a helper lift the tub, which made attaching the new suspensi
... Read moreon rods easy. The tub is extremely heavy so by a helper lifting it up it made attaching the new suspension rods much easier. IMPORTANT: According to the technician's manual, which was taped to the inside of the washer, it is absolutely necessary to recalibrate the washer after replacing any suspension parts. We did this by following the instructions in the tech manual. Failure to recalibrate a washer could result in poor performance. The procedure is different for each brand or model of washer, but again is absolutely essential after replacing suspension parts of any kind. For some unknown reason, our washer did not have the tub centering springs. Our model should have had the springs.Facing the washer, we attached one to the front left tub housing and one to right rear of the tub housing. Recommend that anyone watch the installation videos for the suspension rods, center springs, and main drive belt before attempting the repairs.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlos
March 3, 2024
How many hoses will be delivered for this price, Is it one or two?
For model number 11026012011
Hi Carlos, thank you for the question. Based on our research, the fill hoses, part number PS1156134, you have mentioned, contains two hoses. This price is for the set of two. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
May 6, 2018
I have a Maytag brovos xl that the rats have ate the hoses, the plastic ones underneath. I have bought the black one for the bottom but their is a white one that runs from the pump up the back of the machine, I guess to the cabinet where the waste water line connects. Can ya help me find that part
For model number MVWB835DW1
Hi James, Thank you for the question. The hose that runs up the back of the appliance to the drain. woudl be the drain hose, PartSelect Number: PS11726191 but we only carry this hose in black. Hope this helps!
Was this helpful?
Thank you for voting!
John
August 10, 2021
I am looking for the filter for the hose end where the hose attaches to the water supply.
For model number CAW9244BW0
Hello John, Thank you for the question. The Filter for the Fill Hoses are only sold as part of the Fill Hose its self. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
