This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
August 31, 2017
GE washing machine mode wprb8050. Need to replace dual water value inlet. The picture shows the wire connections pointing to the the left and to the top (west/north), but my value has the connections pointing to the left and right (east/west). Do you have this part with the connections pointing east and west
For model number WPRB8050
Hi Dan,
Thank you for your inquiry. The water valve you have listed should work for your appliance. There is a video on our website that shows how to install the part. You may need to reference that to see how to install the wires. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Chad Jewell
April 24, 2018
Cold water only fills if i relieve the pressure by shutting off the cold water and turning it back on. May have to repeat several times to get full water flow. Happens sometimes at start and most of the time at rinse cycle. What part should i replace. Dribble fills if left unattended. (i have checked the white cap filters and they are clean)
For model number General Electric Washer S1070A1WW
Hello Chad, thank you for your question. Any water flow issues are usually in relation to the water valve. Since you have checked the filters, and they are clean, the problem will be with the valve. I would recommend replacing the Water Inlet Valve WH13X10024. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 10, 2020
Where do you find model no. Need to replace water value
Hello and thank you for writing.
The model number on washers are usually on a label on the back of your unit. We hope this helps. Please contact us anytime if you require further assistance.
Here is our link to finding your model number:
https://www.partselect.com/Find-Your-Appliance-Model-Number.aspx
3 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
October 13, 2017
Can you tell me which contact on the washer goes to hot water side of the valve? I may have switched them. One contact is clear plastic and has two purple wires. The other contact is red and has a pink wire and a white/pink wire. Thanks
For model number part no. WH13x10024
Hi Richard,
Thank you for your inquiry. For information on the contacts you will need to check your owners manual or contact the manufacturer. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 5, 2018
I have replaced the three items listed on your site to stop overfilling, and the machine keeps filling until i stop it. What is the next step?
For model number wwre6260d1ww
Hello Robert, Thank you for your inquiry. I would check the drain pump and motor assembly as well as the main control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lynne
February 22, 2018
I have cold water, but no hot water coming into the machine. I have checked and the water is getting to the machine, but not in. From looking here, it seems that i need to replace the water inlet valve, but if it needs replacing, should both hot and cold water not be working or can only one side of the valve stop working? Thank you for your help.
For model number WJSR4160DAWW
Hello Lynne, thank you for your question. If there is water coming to the valve from the house, and the cold water port is working you would want to replace the Dual Water Inlet Valve WH13X10024. Only one side of the valve can stop working sometimes. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glen
November 8, 2018
The washing machine fills fine when started but almost completely stops filling on the rinse cycle.
For model number WBSE3120B2WW
Hello Glen, Thank you for the question. This is mostly likley caused by a defective Timer/Control Board, Part Number: PS756537 that is not going through the cycles. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
M
January 8, 2019
What is the typical lifespan for a dual water inlet valve?
For model number WHSE5240D1WW
Hello, Thank you for the question. Very sorry but we do not have the life span of the valves. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Les
September 30, 2019
Water very slowly seeping from the bottom of the rear panel ( in the area of the inlet hoses) probably about 6 oz. For the entire cycle.
For model number S2100E1WW
Hello Les, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1155105. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Thomas
August 23, 2021
Machine will not stop trying to drain the tub. The tub is empty but the machined continues to pump.
For model number WNSE6280B2WW
Hello Thomas, Thank you for the question. This sounds like the appliance is in Flood Mode. You can try to unplug the appliance for a few mins and plug it back in, Give it at least 20 minutes and the washer should stop draining and exit flood mode on it's own. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your General Electric Washer Dual Water Inlet Valve
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 38 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer overfilled without shutting off
The actual problem after getting into it was my pressure sensor line that comes off the wash tube was clogged with soap and dirt from years of use. I changed the listed parts as a precaution but make sure you check the line where it meets up at the washer tub not at the switch side. The front of the washer pulls off
Dripping Water into the tube while machine was off
Easy enough. I had some help tightening the hoses to the inlet valve. I watched the video about how to repair and it was straight forward and easy to follow. You'll need a bit of strength to tighten the hoses to the dual water inlet valve. Be precise when lining up the threads of the hose and the inlet valve...don't force it...find it...if it goes on crooked it will strip the threads and wreck it. Recommend purchasing some plumbers tape to wrap on the the threads of the Dual Water Inlet Valve. Fixed the dripping water problem immediately.
Sandra from LOS ANGELES, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
little to no water coming out when trying to wash clothes
There was a video online right below the part that was recommended that I needed. The video was very easy to understand. After watching the video I just simply did the repair exactly as was instructed and within 15 minutes the repair was completed and the washer works like new. Thank you so much!!!!
John from MENDON, MI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not shut off
This site is amazing. I entered my model# and described the issue and they identified the part. I watched the repair video once and made the repair in the same time as the video. One caution. Make sure you keep track of which wires came from which connection. Not a big issue but you don't want to get them switched.
Jeff from MORTON, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Continuous water running during spin and rinse cycle
Turned off the water and disconnected the water lines. Took of the control panal, only 4 screws and got access to the dual inlet water valve. Device removes with 2 screws and power connectors slide off. Reverse removal and your in business. So easy to do, part was an exact fit. Don't buy a new washer, fix your old one!
Troy from FARGO, ND
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water wouldn't stop filling.
Changed the dual water inlet valve.
BILL from YORK, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No cold water
New dual water inlet valve.
Philip from Story City, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The cold water wouldn't shut off causing the washer to overflow
I removed the supply hoses, removed the screws holding the sheet metal control console in place exposing the dual water inlet valve. Removed the two screws holding the valve in place, removed each wire from the old valve attaching it to the matching connector blade on the new valve. Using pliers loosened the spring clamp holding the output hose to the valve and reattached the hose to the new valve. Then screwed the new valve to the washer and reattached the supply hoses. After running a test for leaks and that the valve functioned properly, I screwed the sheet control console back in place.
Clyde from Omaha, NE
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was not getting cold water when trying to fill the washer. Was only getting the hot water
Replaced the Dual Water Inlet Valve. Took about 15 minutes to take the old one off and put the new one back on. the cold water started comming out like it should,it also seemed to have more pressure and filled faster. We have had the washer for over five years and it seemed that it took forever for it to fill when we did a load. So by replacing the valve it fixed the problem of no cold water comming out and the slowness of filling. It seems to be filling faster.
Rocky from Palmetto, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the cold water won't ,stop
turn the water off and remove the hoses from the dual water inlet valve;4 screws from electric panel and the 2 screws were the dual water inlet valve is,also a little hose;so that set.I put everything back on.now is working
sergio from columbus, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
27 Reviews
4.9
Filter By Rating:
5 Stars
25
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gregory F - July 28, 2023
Verified Purchase
Simple repair
Once I figured out the part needed, the search and ordering the part was made very simple and easy on the Part Select website.
★★★★★
★★★★★
Charles N - April 19, 2023
Verified Purchase
Easy replacement
No more dripping in the well. Saved buying a new clothes washer
★★★★★
★★★★★
RONALD B - October 12, 2022
Verified Purchase
Good part and it fixed my problem!
The part came on time and in good condition. The installation video was very helpful.
★★★★★
★★★★★
Alan C H - June 16, 2022
Verified Purchase
Good replacement for my 20 year old GE washer
Good video demo. New pump works great & the leaves the washer basket dry as a bone! Good investment.
★★★★★
★★★★★
Trisha T - July 11, 2021
Verified Purchase
Easy repair
super easy repair. accompanying video was all we needed! Now our washer doesn't flood our house!
★★★★★
★★★★★
Noel V - May 12, 2021
Verified Purchase
Easy repair
Delivered quickly works fine.
★★★★★
★★★★★
Peter S - January 19, 2021
Verified Purchase
Washing machine water inlet
Part was delivered part fit perfect definitely be using your compony in the future
★★★★★
★★★★★
KELLY B - November 10, 2020
Verified Purchase
Fixed the leak
Fit perfect. Easy to install. Fixed my leak issue
★★★★★
★★★★★
Reinaldo G - July 30, 2020
Verified Purchase
Easy repair
The part was in great condition. The video provided by Parts Select was also very helpful. Thereby making the installation smooth and seamless.
All in all it was a great experience.
Thank you,
Reinaldo Gonzalez
★★★★★
★★★★★
Alan S - September 16, 2019
Verified Purchase
Worked perfect
Replacing a water inlet valve is pretty easy. If the hot water works but the cold water does not, or vice versa, then the inlet valve is probably the problem. I ordered the part, it arrived quickly and I installed easily and it works. Perfect. Thanks
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1155105
Manufacturer Part Number: WH13X10024
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
