Replacing your Frigidaire Washer Outer Door Panel - White
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Leaking
This part works with the following products:
Washer.
Part# 134550500 replaces these:
AP3885626, 1191157, 134601500
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
4.3
Filter By Rating:
5 Stars
8
4 Stars
3
3 Stars
1
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeremy S - August 20, 2023
Verified Purchase
Easy Repair with the Perfect Replacement Part
The part was in great condition, shipped quickly and made for an easy repair. Thanks!
★★★★★
★★★★★
Dave R - November 15, 2022
Verified Purchase
Just what I needed
Fit perfectly and now my door closes better
★★★★★
★★★★★
Alex R - November 11, 2021
Verified Purchase
Rapair
Was an easy repair
★★★★★
★★★★★
WILLIAM W - May 18, 2020
Verified Purchase
Washer door repair
the part arrived pretty quick, was the correct part i needed. Installation was easy with inline directions, Thanks
★★★★★
★★★★★
David V - April 9, 2019
Verified Purchase
Washer door
Waiting on 2 other parts wondering when I can get them
★★★★★
★★★★★
Mitch B - February 12, 2019
Verified Purchase
easy repair
should have purchased the back piece with bushings also
★★★★★
★★★★★
Paul M - November 13, 2018
Verified Purchase
REPAIRED WASHER DOOR
Some plastic portions of the front door broke in the hinge area and the door started sagging.
This new outer panel was perfect, exact to measurement replacement and went together in just minutes. Have to say the video was the total answer to re-assemble after the new part arrived. Getting parts in the right order can be tricky but the video solved that. Good job. Works great now, thanks for having this fine site.
★★★★★
★★★★★
Larry S - October 18, 2018
Verified Purchase
Perfect fit
This part went together well. Had to wait a while for standard shipping, but it was economical. The online videos were a tremendous help. Part Select does a great job.
★★★★★
★★★★★
Paul H - September 26, 2018
Verified Purchase
Exact match but needed to replace both panels
This is an easy repair but I had to find the inner panel to replace as well in order to stop the door from sagging. The plastic around the hinge area needs to be solid vs fins.
★★★★★
★★★★★
Ron D - August 30, 2018
Verified Purchase
Authentic Part as advertised
Could not expect an easier install. Also was impressed with fast shipping.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door sagging, plastic broken
Followed the video instructions to the letter. so easy. Door works great and will certainly come back if and when I need any parts.
Paul from BOTHELL, WA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was sagging so strike would not line up upon closing the door.
This part did not fully solve the problem because both halves of the door need to be replaced and the other half is neither included in this purchase or available on this web site that I can see. The door panel is thin plastic and the problem will reoccur. Removed door by removing the metal hinge screws, disassembled door, installed new p
... Read moreart, reinstalled door.
Read less
Paul from BOZEMAN, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Striker broke while closing door due to misalignment from sloppy hinge.
Disassembled the door panel(7screws).Replaced the outer door panel keeping the existing hinge bushings in proper alignment (requires two people because of the weight of the glass door bubble). You could remove the entire door by removing the metal hinge, however, these screws would not come out for me. Replaced the striker by removing two
... Read more screws.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy
September 12, 2017
The door drops down when I open it and when I close it I have to lift the door up
For model number Aft6000fs2
Hi Kathy,
Thank you for the question. I suggest replacing the Door Hinge with Bushings.
Hope this helps!
After replacing the door strike and breaking it after two uses, i discovered that the outer door panel has a crack near the hinge. So before i replace another door strike, i'm wondering if i need to replace the hinge and the outer door panel, as well as a new strike? My thanks in advance for your time.
For model number FAFW3801LW5
Hello and thank you for writing.
I would want to say, that you might get away with only changing the strike and the outer door panel, but as it is hard to say if the crack in the panel could have been caused by a defective hinge. So if you want to go safe we would suggest replacing all 3 parts at the same time or you could really closely examine the hinge PS1152380 and see if there is any damage, but if you miss a crack or something then you will start replacing part again that you already replaced. We hope this helps. Please contact us anytime if you require further assistance.
Door is cracking on the outside near hinges. Also cracking on the inside in the space in the hinge area. Have to lift it up slightly to close. Feels like the door will fall off soon.
For model number FAFW3801LW3
Hello Pat, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS1152384 for the Outer Door Panel. Thank you for the inquiry, good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
May 3, 2018
My door hinge has broken on our washing machine the model number is above this is the serial#4c11802519
For model number FAFW4011LW0
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS1152380. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
November 22, 2019
Will this door fit to our model?
For model number FFFW5000QW0
Hi Joe, thank you for your question. No, this would be the correct part for your appliance model: PS3490391. Good luck with your repair.
What is the part number for the hinge bracket mounting (part number 42 on atf60000fs1)? I rounded of the head when removing for the door panel replacement.
For model number Firdgadare FAFW4011LW
Hello Les, thank you for your question. The item # 42 is the screw and the part number is Part #: PS3495292. Those screws attach the door hing Part #: PS1152380 to the opening of the door.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roger
October 27, 2023
Will the outer door panel fit my model?
For model number Atf7000eg0
Hello Roger, thank you for asking. The outer door panel you have mentioned is not compatible with your model. The compatible outer door panel for your model is part number PS3495258. We hope this helps!
