Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cynthia V - January 16, 2022
Verified Purchase
New freezer shelves
I purchased two additional freezer shelves for my new Frigidaire refrigerator..
Very happy with them makes storing item easier and neater...Love them..
★★★★★
★★★★★
PAULA F - May 27, 2019
Verified Purchase
Easy repair. Fast shipping.
Great shipping. Easy fix
★★★★★
★★★★★
Mary G - January 24, 2019
Verified Purchase
Part arrived a month after ordering; it was the correct part - a freezer shelf
Glad to have the shelf. If the manufacturer had put enough shelves in the brand new refrigerator we received in our new home, we would not have had to order it in the first place. Since I wanted to order the additional shelf, tho, you made it easy to do so and I am glad to have it.
★★★★★
★★★★★
Judie H - September 12, 2018
Verified Purchase
extra space
I ordered this shelf so I could have extra space in the freezer to organize & find what I have in there. It works well- as expected. I am happy with this purchase.
★★★★★
★★★★★
Florence A - March 13, 2018
Verified Purchase
good part
GOOD FIT
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Missing freezer shelf
With shelf tilted put one side in and then straighten the shelf to put other side in and then snap in trim. Real easy and less than 5 minutes
Removed shelves above the problem area. Tilted new shelf up to slide prongs into openings on one side, pushed in far enough to allow prongs on the other side to fit into their openings. Evened the shelf out then added some thick tape to both sides of the shelf to keep it from falling out.
Cheryl from CAPE CORAL, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our new house came with an oven and refrigerator...but no oven racks or refrigerator door bins
I found the model numbers on the appliances and easily identified the parts I needed. They arrived in perfect condition and installation was a breeze.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
March 8, 2018
Is there a black clip that attaches to the middle wire shelf in the freezer ? Its plastic and makes it so it doesn't slide around.My shelf fell down and there is only one of these clips on the back and i didn't see any on the website.
For model number FFSS2615TP0
Hello Dave, thank you for your question. The rack spacer clips are part number 5303299664. This will be clipped onto the rack and will fill the space between the rack and the wall. Sometimes, over time the inner freezer wall will warp slightly and the racks fall down constantly. This should help fix that issue! Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
January 24, 2018
What is mid freezer shelf dimensions. I need approximately 13.25 x 14. Help find part.
For model number FFSS2614QE4A
Hello Steve, thank you for your question. The mid freezer shelf dimensions are approximately 13.25 x 14. The part number is PS1148756. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rose
September 19, 2022
I want an extra shelf for the freezer. Currently there are only 3 plus the one over the bin which seems to be the part I've seen, but I don't know if that one fits the side wall holes. Is there one that I can buy that fits the side wall holes and the part number? Thanks.
For model number FFHS2622MS3
Hello Rose, Thank you for your inquiry. We have researched the model number that you have provided and show the sizes of the 3 freezer wire shelves are as follows: PS1148755 measures 14 inches by 10.5 inches, with the wall posts adding another half inch to the sides and is the shelf right above the drawer rails, the next shelf up part# PS1148756-which measures 14 inches by 10 inches, with the wall posts adding another 2 and half inch to the sides, and the posts are only 13 inches apart, and the top shelf, part# PS1148757 which measures 15 inches by 11 inches, with the wall posts adding another 2 and half inch to the sides, and the posts are only 12 1/2 inches apart. You would have to measure the width between the holes to see which shelf would fit into the side wall holes. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi Carolyn,
Thank you for your question. The part number listed under your model number for the shelf that goes over the bottom freezer drawer is PS1148755. There are 2 hangers that the drawer will slide into that you may need. The part number listed under your model number for the right side basket hanger is PS429915 and the part number listed under your model number for the left side basket hanger is PS429917. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Ross
December 14, 2019
I can't seem to find the freezer shelf for my fridge. I just purchased an ice maker and see now that the ice cube bin needs to sit on a shelf that I don't have. Can you help me locate the part that I need? Regards, ross.
For model number FRT14A2AW1
Hello Ross, Thank you for the question. Sadly, we could not find the requested part. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
