Part Location Diagram of 134503600 Frigidaire Drum Belt
See part 25 in the diagram
Replacing your Frigidaire Dryer Drum Belt
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Drum Belt 134503600

 Fits your 41788042700!
★★★★★
★★★★★
53 Reviews

Rated by 93 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 17.66
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 41788042700!
PartSelect Number PS1148434
Manufacturer Part Number 134503600
Manufactured by Frigidaire
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Drum Belt Specifications

This drum belt, often referred to as a drive belt, is used in the assembly of dryers. It goes around the drum, the idler pulley, and the motor pulley. As the armature on the motor spins, this belt is what rotates the drum and tumbles your clothes during the dry cycle. If you can hear the motor running but the drum is not moving, that is a sign your belt is broken, stretched, or damaged, and can no longer grip the drum. This belt is 88 3/4 inches long, and is 1/4 inch wide. Because it is made of rubber it is common for this part to become brittle and need to be replaced. This is an authentic OEM replacement part, and it is sold individually. Remember to unplug your dryer before you begin this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes | Drum Not Spinning | Too hot
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Gibson, Kenmore, Tappan.
Part# 134503600 replaces these:
AP3865318, 1156784, 134503600, 134163400, 5303283471, F148270-000, F1482740-000
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

26 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Blake
July 20, 2017
So I ordered a drum belt and a idler pulley for my dryer and none of the instructions say how to remove the front panel door to get at the parts. Can you help, thnks.
PartSelect logo
Hi Blake, to remove the front panel door you will need remove the top panel and then the control panel from your dryer. After these are out you can unscrew the front panel, and then remove the belt. To remove the tub, you will just pull it out of the front by lifting up and out. Good luck with this repair!

38 people found this helpful.

Was this helpful?
Thank you for voting!
Norman
July 20, 2017
How do you install this belt, what side goes against the drum?
PartSelect logo
Hi Norman, great question! You will need to remove the front assembly by releasing the clips from underneath the corners at the top. Once the front assembly is removed you can wind the new drum belt around the drum of the dryer. Should be fairly simple, but if you have any further questions please let us know.

14 people found this helpful.

Was this helpful?
Thank you for voting!
Elsie
July 20, 2017
My dryer is not spinning and I’m not sure if it is the belt or the pulley. I’ve been reading about both, but can you give me more info?
PartSelect logo
Hello Elsie, you should try spinning your drum by hand. If it does not give off any resistance, that usually means your drum belt has snapped. To know for sure, we suggest checking the drum belt, but that is your most likely problem. I hope this helps!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Kendra
January 6, 2020
My electric dryer is making a load screaching noise i think its one of the belts what are the proper belts
For model number DNSR475EY1WW
PartSelect logo
Hello Kendra, thank you for your question. The belt for this unit is PartSelect Number: PS1766009. If the belt is fine, the issue might be front drum bearing, rear drum bear, or drum glides. I hope this helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Tony
May 6, 2019
Is the belt the only possibility for dryer mot heating? I have cleaned vent and basket etc
For model number CAQE7001LW0
PartSelect logo
Hi Tony, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
RALPH
December 12, 2018
Put in a new rear bearing assembly and new belt. I need instructions on how to put the belt on. The idler pulley and spring came apart and need to know where they go.
For model number GLER341AS1
PartSelect logo
Hello Ralph, Thank you for the question. Here is a link for the How To Video for the belt. Hope this helps! https://www.youtube.com/watch?v=7d_a7wJekAs

5 people found this helpful.

Was this helpful?
Thank you for voting!
Jorge
September 2, 2019
Heats up but wont spin?
For model number WGR211ES0
PartSelect logo
Hello Jorge, Thank you for the question. The most common reason for the drum not tumbling but still running and producing heat is a broken Belt, PartSelect Number PS1148434. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
December 12, 2019
Is this the right belt for a GE pwsr483ga1ww dryer? Thank you!
For model number pwsr483ga1ww
PartSelect logo
Hello Karen, thank you for writing. It is not shown as compatible. The compatible replacement for your model is part number PS1766009. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Caroline
December 30, 2019
We bought the belt 134503600 and tried to install it but it seems too big. It’s the recommended part for our Frigidaire dryer, so what could be the issue?
For model number GLER341CES0
PartSelect logo
Hi Caroline, have you followed our install video: https://www.youtube.com/watch?v=7d_a7wJekAs&feature=emb_title ? If so I would double the part number that came in the packing, its possible you may have been shipped the wrong part. Thank you for your question and good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Myrna
March 7, 2019
Is it normal to make a loud noise after you've replaced the drum belt?
For model number FASG7073NW2
PartSelect logo
Hello Myrna, Thank you for the question. If the belt is installed properly there should be no loud or unusual noises. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Part Videos

Replacing your Frigidaire Dryer Drum Belt

Replacing your Frigidaire Dryer Drum Belt
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 93 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Noisy.
Had scape upper felt off of the drum edge but had to use a hacksaw to cut off the three plastic plates that were riveted to the upper felt replacement part. The old part number was131469100.
Other Parts Used:
Dryer Drum Bearing Bracket Drum Glide - White Lower Front Felt Seal with Adhesive Upper Drum Glide Rear Drum Bearing Kit Drum Support Bearing
  • David from EDGEWOOD, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not do as video.
Had to open back side vent & use needle nose to secure spring.
Other Parts Used:
Idler Arm Assembly
  • Linda from COVINGTON, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan cage came undone from motor
The new motor from parts select was not correct. The new motor is a bolt on. The original motor was a press on. Had to return at a cost of 42.00 dollars. Had to buy a new dryer.
Other Parts Used:
Idler Arm Assembly Drive Motor with Pulley
  • Christopher from DENVER, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screeching noise under load
I basically followed the video instructions on your website. Pretty simple but ran into an issue pre-threading the 3 self taping screws into the spindle bearing. The screws provided were blunt on the end and did not tap easily at all. I used the existing screws that were much more "sharp" and worked much better. Also, the new screws were Philips drive and due to the amount of torque trying to self tap nearly stripped them out. The old sharper screws were square drive which had a better bite. So basically, I used the old screws to self tap and then used the new screws for the final installation.
It took a long time to clean all the lint out from the inside of the dryer. The motor was completely embedded with lint and animal hair. You may want to suggest that a good cleaning may be needed so bring a shop vac...and also something to carefully pick the lint balls out from around the motor armature and bearing area. Overall the video instructions were really a big help!
Other Parts Used:
Rear Drum Bearing Kit
  • John from WESTLAKE, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a squelch/squeak coming from the rear of the unit
I looked up a YouTube video on my specific model. Found one that said “basic disassembly”. I watched that and had it apart and back together in no time. Very easy to take apart and put new parts back in it. Re-assembled and since the repair no squeaking.
Other Parts Used:
Rear Drum Bearing Kit Drum Support Bearing
  • Stephen from HICKSVILLE, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer drum quit turning
followed the instructions video on the site had no problems just took about 2 hrs to complete
Other Parts Used:
Upper Drum Glide Front Lower Drum Seal Drum Support Bearing
  • FRANK from VERO BEACH, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drum was not rotating smooth. It was noisy and the belt broke loose
I replaced the drum kit and belt.
Other Parts Used:
Rear Drum Bearing Kit
  • Isaias from LAREDO, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken belt
Watched video sent to me after I purchased belt on line. Super helpful!
  • Sharon from UXBRIDGE, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very noisy
Replaced rear drum bearing, drum support bearing & drum belt. Still very noisy. Will order new motor & see if that does the trick.
Other Parts Used:
Rear Drum Bearing Kit Drum Support Bearing
  • Cherry from WATERVLIET, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy dryer
I followed the instillation instructions provided on your website. They were very informative and spot on. My only problem was my strength. I could not get the drum off of the rear bearing myself, but then I am a 61 year old female.
Other Parts Used:
Rear Drum Bearing Kit
  • Christy from BRIDGEPORT, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating:
★★★★★
★★★★★
53 Reviews
4.7
Filter By Rating:
  • 5 Stars
    44
  • 4 Stars
    4
  • 3 Stars
    2
  • 2 Stars
    2
  • 1 Star
    1
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1148434
Manufacturer Part Number: 134503600
Brand
Model Number
Description
Frigidaire
41749012890
Dryer - Residential, Electric
Frigidaire
41749022890
Dryer - Residential, Electric
Kenmore
41759012890
Dryer - Kemore Dryer 41759012890
Frigidaire
41759022890
Dryer - Gas
Kenmore
41761712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41764182300
Dryer
Kenmore
41769042990
Dryer
Kenmore
41769042991
Dryer
Kenmore
41769052991
Dryer
Kenmore
41771712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771712511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41774182300
Dryer
Kenmore
41774182301
Dryer
Kenmore
41779042900
Dryer - Kenmore Dryer Model 417.79042900 (41779042900, 417 79042900) Parts
Kenmore
41779042990
Dryer
Kenmore
41780032990
Dryer
Kenmore
41780042991
Dryer
Kenmore
4178005291
Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
Kenmore
41780412700
Dryer
Kenmore
41781042000
Dryer
Kenmore
41781142000
Dryer
Kenmore
41781142001
Dryer
Kenmore
41782042101
Dryer
Kenmore
41782042102
Dryer
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service