Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
January 21, 2019
Part#318317100 any helpful tips for installation or removing old broken part/ thank you
Hello Scott, Thank you for the question. You just need to twist and turn the part to release it. Then you will just need to insert the new part. It may need to be tapped in place. Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Andre
September 2, 2019
The stamped metal potion of the part looks the same. Ours had a metal screen, not the white(ceramic?) insert. The screen fell out. Is this the correct replacement part?
For model number GLCS378DSA
Hello Andre, Thank you for the question. The Screen is only sold as part of the Adapter PartSelect Number: PS1146692. The manufacture has updated this part and may look different but will still fit and work he same as the original. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sam
June 14, 2023
The inner core of this part fell out. I was going to order part # 318317100 to replace. I have attempted to twist the old tube out of the top of the oven and also pry it out of the top of the oven. Neither seems to work. I put my finger in the tube and it feels like the tube makes a turn ( like L shaped).
So the questions being is does this unit replacement just insert into the existing tube?
If no, are you able to give me the for sure method to remove the old and insert the new. Thanks for your feedback.
For model number Kenmore 790.47853406
Hi Sam, thank you for reaching out. According to our research, you just need to twist and turn the part to release it. Then you will just need to insert the new part. It may need to be tapped in place. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gerry
December 7, 2022
have in wall kenmore stove. need to pull out the adapter assembly vent tube with converter part select #PS1146692; manufacturer part #318317100 how do i remove the one that just spit out its honeycomb ceramic piece and then replace it?
For model number 790.49423313
Hello Gerry, thank you for reaching out. The honeycomb screen is a part of the adapter assembly. In order to replace it, you need to replace the whole adapter assembly. Twist and turn the existing part to release it and then insert the new part by tapping it in place. We hope this helps. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
