The water inlet and dispenser valve is used in washing machines. The function of this part is to control and monitor the amount of water flow into the washer. If there is leaking during use, your machine will not fill with water, or there is no hot or cold water entering the washer, it is important to replace the water valve to solve the problem. For this repair, you will need a Phillips head screwdriver and a flathead screwdriver. For installation instructions, refer to the manual provided by the manufacturer. Remember to unplug your appliance from the power source before beginning this repair.
Leaking | No hot or cold water | Water Filling Issues
This part works with the following products:
Washer.
Part# 134371220 replaces these:
AP3844429, 1154728, 134371220, 134371210
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.7
Filter By Rating:
5 Stars
9
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David R - April 18, 2019
Verified Purchase
Works great so far!
Easy to install. Works great.
★★★★★
★★★★★
KIRK R - April 17, 2019
Verified Purchase
worked as it should
worked as it should
★★★★★
★★★★★
Grace B - January 31, 2018
Verified Purchase
Easy repair super easy to install
It works perfectly and was so simple to install.
★★★★★
★★★★★
Roger K - November 12, 2018
Verified Purchase
Perfect part
Easy to order. Recieved the perfect part. Problem solved.
★★★★★
★★★★★
Terry G - July 19, 2018
Verified Purchase
Exactly what I needed
Great job! Part was sent quickly and was what I needed to fix my leaking washing machine. I highly recommend this site for your part needs.
★★★★★
★★★★★
Carl E - July 3, 2018
Verified Purchase
frigidare washer water mixing inlet valve
part was perfect fit and worked as it should. If needed quick do not use economy shipping as I did when asked if that was how I wanted it sent. The part was excellent quality and am very pleased. will use them again if any parts are needed.
★★★★★
★★★★★
Larry S - January 2, 2020
Verified Purchase
Leak FIXED!
Part came quickly, despite being the week before Christmas. After watching the short tutorial on how to do it, it took all of 30 minutes to replace the inlet/dispenser valve in my washing machine from start to finish. Just another example of why I fix my own appliances and only use partselect.com for my component purchases.
★★★★★
★★★★★
Tim A - June 16, 2020
Verified Purchase
Did as desired.
It works. Pat yourself on the back. Harder!
★★★★★
★★★★★
Brian C - March 23, 2025
Verified Purchase
Part worked exactly as expected
Perfect condition, perfect fit.
It took some time with no instructions available to get it wedged in just right in my washer but it worked perfectly fine and we don't have any leaking anymore.
★★★★★
★★★★★
Barry H - September 23, 2018
Verified Purchase
Easy repair but order two boot washers and hot water insert.
There are two boot washers and an insert that goes in the hot water inlet side that should be ordered as well. Other than that the part is exactly like the original.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 11 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was filling with water when not in use
This repair was pretty simple. Unplug washer from electrical outlet and remove hoses. This is a good time to replace the hoses. Removed two screws at the back of the washer to remove the top of the washer. This exposed the faulty valve assembly. Disconnect the three connections. There are two screws holding this part in place. The top on
... Read moree is easy to remove, the bottom one is a little more difficult due to access. Remove plastic retainer plate on back of washer. Remove faulty valve assembly. There are two rubber grommets/gaskets that will need to be removed from the faulty part and installed on the new part. Slide new assembly into place. Secure with the two screws. Replace retainer plate. Reattach power connections. Reattach hoses and finally Reinstall top of washer. Total time was right around 30 minutes.
Read less
Dan from LONE TREE, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water pooled in machine when not in use with door left open and turned off.
I unplugged the washer, turned off hot and cold water at the source. I wrenched off the 2 hoses from the washer (have a towel handy for the residual water in the hoses and keep them elevated until you can drain the residual water out into drain site, where you turn off the water supply). I removed the 2 screws that held the top panel on (
... Read moreback side top corners) & slide off top to see interior. I used screw driver to pop off plastic piece that secures 3 tubes (hot water, cold water & exhaust vent). I then unplugged all 3 wire harnesses from the water valve & temperature wire from left side [assuming you are standing at the back of the machine where you have to be to do all this work]. I then untwisted the exhaust vent plastic tube (large cream tube at far right in machine) & somehow managed to get it pulled out. I then unscrewed the 2 screws from the old water valve- one on left is easy, the one on the right is difficult due to lower position next to exhaust vent - I had to hold my other hand [thankfully I have small hands] under the screw location as my screwdriver was not magnetic so I wouldn't drop the screw into the machine). I then removed the valve assembly by pulling slowly backward & removed. I then just reversed the above to replace the new one. Not bad for my 1st washer fix ever. I've used it 5 cycles now and no issues.
Read less
Stephanie from SACHSE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The valve had cracked so water was leaking out from the cracked area.
After getting a quote for $140 for a repair, I decided to try ordering online and hope for the best. I am delighted to say it was incredibly easy! All I had to do was remove the broken valve by unscrewing the water hoses with a wrench and remove two screws that held the valve on with a screw driver. Next, I popped in the new piece, replac
... Read moreed the screws with the screwdriver and attached the hoses, then tightened them with the wrench. Very easy! 10 minutes total.
Read less
Jennifer from Middleboro, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frozen pipe
Removed top cover to get access to intake pipe for hot & cold water. Remove electrical connections and two screws replaced part and cover. Thanks very quick service.
Frank from Auburn, NH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
18 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had tried to clean the small basket type screens at the rear of the inlet valve but both of them disintegrated
Following the instructions on your page I was able to see quite clearly what needed to be done. I received the new part promptly and my machine is now working fine. However, the ongoing story with the dryer is another matter.
George from INMAN, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
15 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
crack in plastic housing
first removed top of machine. removed 3 valve core wires set. Then removed left top screw on valve. Then removed vent tube to get to lower right screw. disconnected hose connect rack so valve housing could be removed & new installed. Rapped insulation around valve & installed. Put everything back together in reverse order.
Jim from Tucson, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was in the garage, and we had a hard freeze. Water in the valve froze, breaking the valve.
Took the top off the washer, removed the valve, installed the new one, back in buisness. It was so easy to order the part, and have the repair done in no time.
Alan from Eugene, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from inlet hose area.
Close examination revealed cracked plastic inlet area. I removed top of machine any carefully was able to loosen an pull damaged (froze over the winter) part back to remove. Attachment screws difficult to access, had to use magnetic screwdriver attachment during reassembly. Always iffy when working with plastic parts. Part arrived
... Read more 2 days later, took about 40 minutes to install.
Read less
Andrew from Mastic Beach, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Valve dispener would spray water all over inside of washer.
My husband made the repair. First, he had to remove the dryer off of the top of the washer since it's a stacking unit. Disconnect water lines. Next he removed two screws from the back of the washer that allows you to remove the lid. Now unsnap a trim piece that is on the back surrounding the water connections and an exhaust port. Rea
... Read morech inside the washer, turn the exhaust port unlocking it and pushing out the back of the washer as far as you can to get it out of the way. Disconnect the electrical lines from the valve dispenser. Remove the two screws that fasten the valve dispenser to the washer. Install the new dispenser and reassemble.
Read less
Julie from Lancaster, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
80 of 91 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the part cracked from water freezing
First I removed the two screws that hold the part in place. I then pulled the part out about 3 inches and disconnected the three wires from the part and put the new one in
Kathy L from Twin Lake, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
October 5, 2017
I have a machine that starts to allow water in and then stops and does nothing else.
For model number FAFW3511KW0
Hi Dave,
Thank you for your inquiry. If the washer starts to allow water in and then stops and does nothing else, then you will need to check the water inlet valve. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Irene
January 22, 2020
Does the washer valve have o rings on the end
For model number FAFW3801LW3
Hello, Thank you for writing. Here is the O-ring you need, it is not sold with the valve. Part Number: PS1145697. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Katherine
February 12, 2020
My Electrolux/Frigidaire washer works great, have replaced door lock failure already but now i have a drum filled with water about once every three weeks when i come down to do laundry. Yesterday it was all over the floor which i guess tells me the boot may be leaking too, and that the water is still coming in when i walk away. Is this likely the water inlet value?
For model number LLTF2940FE1
Hello Katherine, Thank you for the question. In most cases the Valve will need to be replaced. The port can become "Stuck" open and allow water through when not in use. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Caleb
April 29, 2019
My washer leaks and it looks like it comes from underneath the machine and not sure where to start. I do not think its coming from the door as the water never runs out of there during the whole cycle.
For model number FAFW3517KRI
Hello Caleb, thank you for inquiring. For this symptom you will want to replace either the Water Inlet and Dispenser Valve part PS1145692, the Drain Hose part PS975871, or the Drain Pump part PS7783938. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Shmonster
January 28, 2024
Hello.
The cold water will not shut off when the machine is started and continue to run non stop even when the machine is set to off .
This happens on each setting. I’ve tried unplugging the power to reset the machine but that didn’t help.
Than you .
For model number GLTF2940ES2
Hello Shmonster, thank you for getting in touch. Based on our understanding of the issue, we would recommend replacing the water inlet valve, part number PS1145692. It control and monitors the amount of water flow into the washer. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Domenic
December 16, 2017
All lights flash and beep when machine is off. Must unplug after each use. Also has a code e41. Already replaced lock and switch. Any help would be appreciated. Ready to throw in garbage. Only 7 years old.
For model number DAFW3577KWO
Hello Domenic, Thank you for your inquiry. I would check your wiring harness and your control boards with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
March 26, 2018
My washer will not fill, water valves are on.
For model number FAFW3801LW3
Hi Bob, Thank you for the question. If the valve is getting power but not releasing water into the tub it may need to be replaced. PartSelect Number: PS1145692. If the valve is good you may have a defective control board, PartSelect Number: PS3492720. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
December 26, 2017
My washing machine will go through it complete washing cycle but at the end of the washing cycle the door stays locked and the cold water starts to fill up in the machine. The only way to stop it is to un plug the machine. But when i plug it back in to power the cold water starts filling it up again. Is this the water inlet valve that's causing the problem. I have a lot of sand in my water and it has got into the inlet valve.
For model number CFW4500KW0
Hi Charles, Thank you for the question. I suggest trying to clean the valve out first and if this doesn't fix the issue the valve will need to be replaced. Hope this helps!
Was this helpful?
Thank you for voting!
Calin
January 30, 2019
How do i know which of the 2 parts i need:Ps1145747 or 134371220?
Hello Calin, Thank you for your inquiry. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Carolyn
April 15, 2018
I recently replaced these three parts- water i and d valve, door strike and lock switch. My machine, when i start it, does not fill but sounds like an automatic weapon. Please help.
For model number CFW5000FW1
Hi Carolyn,
Thank you for your question. If the washer is not working, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the door lock and switch assembly, the door strike, the door hinge with bushings, the shock absorber kit, the drain pump and the motor control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1145692
Manufacturer Part Number: 134371220
