Frigidaire/Frigidaire_Thumb/XA5P3WRB.gif
See part F36 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Water Inlet and Dispenser Valve

★★★★★
★★★★★
10 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your FAFW3801LW3!
 Fits your FAFW3801LW3!
PartSelect Number PS1145692
Manufacturer Part Number 134371220
Manufactured by Frigidaire
Product Description

Water Inlet and Dispenser Valve Specifications

The water inlet and dispenser valve is used in washing machines. The function of this part is to control and monitor the amount of water flow into the washer. If there is leaking during use, your machine will not fill with water, or there is no hot or cold water entering the washer, it is important to replace the water valve to solve the problem. For this repair, you will need a Phillips head screwdriver and a flathead screwdriver. For installation instructions, refer to the manual provided by the manufacturer. Remember to unplug your appliance from the power source before beginning this repair.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Will not stop filling with water | Will not fill with water | No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 134371220 replaces these:
AP3844429, 1154728, 134371220
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
October 5, 2017
I have a machine that starts to allow water in and then stops and does nothing else.
For model number FAFW3511KW0
Hi Dave, Thank you for your inquiry. If the washer starts to allow water in and then stops and does nothing else, then you will need to check the water inlet valve. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Caleb
April 29, 2019
My washer leaks and it looks like it comes from underneath the machine and not sure where to start. I do not think its coming from the door as the water never runs out of there during the whole cycle.
For model number FAFW3517KRI
Hello Caleb, thank you for inquiring. For this symptom you will want to replace either the Water Inlet and Dispenser Valve part PS1145692, the Drain Hose part PS975871, or the Drain Pump part PS7783938. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Katherine
February 12, 2020
My Electrolux/Frigidaire washer works great, have replaced door lock failure already but now i have a drum filled with water about once every three weeks when i come down to do laundry. Yesterday it was all over the floor which i guess tells me the boot may be leaking too, and that the water is still coming in when i walk away. Is this likely the water inlet value?
For model number LLTF2940FE1
Hello Katherine, Thank you for the question. In most cases the Valve will need to be replaced. The port can become "Stuck" open and allow water through when not in use. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Irene
January 22, 2020
Does the washer valve have o rings on the end
For model number FAFW3801LW3
Hello, Thank you for writing. Here is the O-ring you need, it is not sold with the valve. Part Number: PS1145697. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Domenic
December 16, 2017
All lights flash and beep when machine is off. Must unplug after each use. Also has a code e41. Already replaced lock and switch. Any help would be appreciated. Ready to throw in garbage. Only 7 years old.
For model number DAFW3577KWO
Hello Domenic, Thank you for your inquiry. I would check your wiring harness and your control boards with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bob
March 26, 2018
My washer will not fill, water valves are on.
For model number FAFW3801LW3
Hi Bob, Thank you for the question. If the valve is getting power but not releasing water into the tub it may need to be replaced. PartSelect Number: PS1145692. If the valve is good you may have a defective control board, PartSelect Number: PS3492720. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Charles
December 26, 2017
My washing machine will go through it complete washing cycle but at the end of the washing cycle the door stays locked and the cold water starts to fill up in the machine. The only way to stop it is to un plug the machine. But when i plug it back in to power the cold water starts filling it up again. Is this the water inlet valve that's causing the problem. I have a lot of sand in my water and it has got into the inlet valve.
For model number CFW4500KW0
Hi Charles, Thank you for the question. I suggest trying to clean the valve out first and if this doesn't fix the issue the valve will need to be replaced. Hope this helps!

Was this helpful?
Thank you for voting!
Carolyn
April 15, 2018
I recently replaced these three parts- water i and d valve, door strike and lock switch. My machine, when i start it, does not fill but sounds like an automatic weapon. Please help.
For model number CFW5000FW1
Hi Carolyn, Thank you for your question. If the washer is not working, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the door lock and switch assembly, the door strike, the door hinge with bushings, the shock absorber kit, the drain pump and the motor control board. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Calin
January 30, 2019
How do i know which of the 2 parts i need:Ps1145747 or 134371220?
Hello Calin, Thank you for your inquiry. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Kelly
July 5, 2021
Washer works through all cycles except it will not turn on water for the fabric softener. By changing the water switch will this fix problem?
Hello Kelly, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 4 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Valve dispener would spray water all over inside of washer.
    My husband made the repair. First, he had to remove the dryer off of the top of the washer since it's a stacking unit. Disconnect water lines. Next he removed two screws from the back of the washer that allows you to remove the lid. Now unsnap a trim piece that is on the back surrounding the water connections and an exhaust port. Reach inside the washer, turn the exhaust port unlocking it and pushing out the back of the washer as far as you can to get it out of the way. Disconnect the electrical lines from the valve dispenser. Remove the two screws that fasten the valve dispenser to the washer. Install the new dispenser and reassemble.
    • Julie from Lancaster, OH
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers, Socket set
    79 of 90 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Frozen pipe
    Removed top cover to get access to intake pipe for hot & cold water. Remove electrical connections and two screws replaced part and cover. Thanks very quick service.
    • Frank from Auburn, NH
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    18 of 26 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    I had tried to clean the small basket type screens at the rear of the inlet valve but both of them disintegrated
    Following the instructions on your page I was able to see quite clearly what needed to be done. I received the new part promptly and my machine is now working fine. However, the ongoing story with the dryer is another matter.
    • George from INMAN, SC
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    15 of 24 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Water pooled in machine when not in use with door left open and turned off.
    I unplugged the washer, turned off hot and cold water at the source. I wrenched off the 2 hoses from the washer (have a towel handy for the residual water in the hoses and keep them elevated until you can drain the residual water out into drain site, where you turn off the water supply). I removed the 2 screws that held the top panel on (back side top corners) & slide off top to see interior. I used screw driver to pop off plastic piece that secures 3 tubes (hot water, cold water & exhaust vent). I then unplugged all 3 wire harnesses from the water valve & temperature wire from left side [assuming you are standing at the back of the machine where you have to be to do all this work]. I then untwisted the exhaust vent plastic tube (large cream tube at far right in machine) & somehow managed to get it pulled out. I then unscrewed the 2 screws from the old water valve- one on left is easy, the one on the right is difficult due to lower position next to exhaust vent - I had to hold my other hand [thankfully I have small hands] under the screw location as my screwdriver was not magnetic so I wouldn't drop the screw into the machine). I then removed the valve assembly by pulling slowly backward & removed. I then just reversed the above to replace the new one. Not bad for my 1st washer fix ever. I've used it 5 cycles now and no issues.
    • Stephanie from SACHSE, TX
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    9 of 10 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      10 Reviews
      4.7
      Filter By Rating:
      • 5 Stars
        8
      • 4 Stars
        1
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Related Parts
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS1145692
          Manufacturer Part Number: 134371220
          Brand
          Model Number
          Description
          Kenmore
          41744052400
          Washer
          Kenmore
          41744052401
          Washer
          Kenmore
          41744052500
          Washer
          Kenmore
          41744082500
          Washer
          Kenmore
          41744092500
          Washer
          Kenmore
          41744152400
          Washer
          Kenmore
          41744152401
          Washer
          Kenmore
          41744152500
          Washer
          Kenmore
          41744252500
          Washer
          Kenmore
          41744252501
          Washer
          Frigidaire
          970L48022A0
          Washer - WASHER
          Frigidaire
          ATF6000ES0
          Washer - Residential
          Frigidaire
          ATF6000ES1
          Washer - Residential
          Frigidaire
          ATF6000FS0
          Washer - Residential
          Frigidaire
          ATF6000FS1
          Washer - Residential
          Frigidaire
          ATF6000FS2
          Washer
          Frigidaire
          ATF6500FG0
          Washer - Residential
          Frigidaire
          ATF6500GG0
          Washer - Residential
          Frigidaire
          ATF6500GG1
          Washer - Residential
          Frigidaire
          ATF6500GS0
          Washer - Residential
          Frigidaire
          ATF6700FE0
          Washer - Residential
          Frigidaire
          ATF6700FE1
          Washer - Residential
          Frigidaire
          ATF6700FE2
          Washer
          Frigidaire
          ATF6700FS0
          Washer - Residential
          Frigidaire
          ATF6700FS1
          Washer - Residential
          Frigidaire
          ATF6700FS2
          Washer
          Frigidaire
          ATF7000EE0
          Washer - Residential
          Frigidaire
          ATF7000EG0
          Washer - Residential
          Frigidaire
          ATF7000EP0
          Washer - Residential
          Frigidaire
          ATF7000ES0
          Washer - Residential

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service