Quick Question!

Have you ever purchased from PartSelect.com before?

1145692-1-S-Frigidaire-134371220         -Water Inlet and Dispenser Valve
1145692-1-S-Frigidaire-134371220         -Water Inlet and Dispenser Valve 1145692-2-S-Frigidaire-134371220         -Water Inlet and Dispenser Valve 1145692-3-S-Frigidaire-134371220         -Water Inlet and Dispenser Valve https://www.partselect.com/Schematics/Frigidaire/XA5P3WRB.gif

Water Inlet and Dispenser Valve

Your Price

$61.95
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1145692
Manufacturer Part Number 134371220
Manufactured by Frigidaire

The water inlet and dispenser valve is used in washing machines. The function of this part is to control and monitor the amount of water flow into the washer. If there is leaking during use, your machine will not fill with water, or there is no hot or cold water entering the washer, it is important to replace the water valve to solve the problem. For this repair, you will need a Phillips head screwdriver and a flathead screwdriver. For installation instructions, refer to the manual provided by the manufacturer. Remember to unplug your appliance from the power source before beginning this repair.

This part works with the following brands: Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Leaking.
  • Will not stop filling with water.
  • Will not fill with water.
  • No hot or cold water.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Short-Tubed Water Inlet and Dispenser Valve without Sensor

Part Number 1145747

Order within the next 8 hrs and your part ships today!
$100.30
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

I have a machine that starts to allow water in and then stops and does nothing else.

Dave for model number FAFW3511KW0
Answer:

Hi Dave, Thank you for your inquiry. If the washer starts to allow water in and then stops and does nothing else, then you will need to check the water inlet valve. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

70 of 81 people found this instruction helpful

Parts Used:
  • Water Inlet and Dispenser Valve
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers, Socket set
Customer: Julie from Lancaster, OH

Valve dispener would spray water all over inside of washer.

My husband made the repair. First, he had to remove the dryer off of the top of the washer since it's a stacking unit. Disconnect water lines. Next he removed two screws from the back of the washer that allows you to remove the lid. Now unsnap a trim piece that is on the back surrounding the water connections and an exhaust port. Reach inside the washer, turn the exhaust port unlocking it and pushing out the back of the washer as far as you can to get it out of the way. Disconnect the electrical lines from the valve dispenser. Remove the two screws that fasten the valve dispenser to the washer. Install the new dispenser and reassemble.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 25 people found this instruction helpful

Parts Used:
  • Water Inlet and Dispenser Valve
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Frank from Auburn, NH

Frozen pipe

Removed top cover to get access to intake pipe for hot & cold water. Remove electrical connections and two screws replaced part and cover. Thanks very quick service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 21 people found this instruction helpful

Parts Used:
  • Water Inlet and Dispenser Valve
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: George from INMAN, SC

I had tried to clean the small basket type screens at the rear of the inlet valve but both of them disintegrated

Following the instructions on your page I was able to see quite clearly what needed to be done. I received the new part promptly and my machine is now working fine. However, the ongoing story with the dryer is another matter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Water Inlet and Dispenser Valve
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Stephanie from SACHSE, TX

Water pooled in machine when not in use with door left open and turned off.

I unplugged the washer, turned off hot and cold water at the source. I wrenched off the 2 hoses from the washer (have a towel handy for the residual water in the hoses and keep them elevated until you can drain the residual water out into drain site, where you turn off the water supply). I removed the 2 screws that held the top panel on (back side top corners) & slide off top to see interior. I used screw driver to pop off plastic piece that secures 3 tubes (hot water, cold water & exhaust vent). I then unplugged all 3 wire harnesses from the water valve & temperature wire from left side [assuming you are standing at the back of the machine where you have to be to do all this work]. I then untwisted the exhaust vent plastic tube (large cream tube at far right in machine) & somehow managed to get it pulled out. I then unscrewed the 2 screws from the old water valve- one on left is easy, the one on the right is difficult due to lower position next to exhaust vent - I had to hold my other hand [thankfully I have small hands] under the screw location as my screwdriver was not magnetic so I wouldn't drop the screw into the machine). I then removed the valve assembly by pulling slowly backward & removed. I then just reversed the above to replace the new one. Not bad for my 1st washer fix ever. I've used it 5 cycles now and no issues.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1145692
Manufacturer Part Number: 134371220
Brand Model Number Description
Kenmore41744052400Washer
Kenmore41744052401Washer
Kenmore41744052500Washer
Kenmore41744082500Washer
Kenmore41744092500Washer
Kenmore41744152400Washer
Kenmore41744152401Washer
Kenmore41744152500Washer
Kenmore41744252500Washer
Kenmore41744252501Washer
FrigidaireATF6000ES0Washer - Residential
FrigidaireATF6000ES1Washer - Residential
FrigidaireATF6000FS0Washer - Residential
FrigidaireATF6000FS1Washer - Residential
FrigidaireATF6000FS2Washer
FrigidaireATF6500FG0Washer - Residential
FrigidaireATF6500GG0Washer - Residential
FrigidaireATF6500GG1Washer - Residential
FrigidaireATF6500GS0Washer - Residential
FrigidaireATF6700FE0Washer - Residential
FrigidaireATF6700FE1Washer - Residential
FrigidaireATF6700FE2Washer
FrigidaireATF6700FS0Washer - Residential
FrigidaireATF6700FS1Washer - Residential
FrigidaireATF6700FS2Washer
FrigidaireATF7000EE0Washer - Residential
FrigidaireATF7000EG0Washer - Residential
FrigidaireATF7000EP0Washer - Residential
FrigidaireATF7000ES0Washer - Residential
FrigidaireATF7000ES1Washer - Residential