Quick Question!

Have you ever purchased from PartSelect.com before?

https://www.partselect.com/Schematics/Frigidaire/9OOZSWQ0.gif
See part 54A in the diagram
https://www.partselect.com/Schematics/Frigidaire/9OOZSWQ0.gif

Infinite Burner Switch - 8" - 240V

Your Price

$23.30
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1145040
Manufacturer Part Number 316436001
Manufactured by Frigidaire

The infinite burner switch controls the stove top eight-inch surface burner, which is the large surface element. If your surface element is not warming up, the element can be tested to determine whether or not it is defective. If your element is not defective, then it is more than likely that the infinite burner switch is the issue. Before you install the infinite burner switch you will need to unplug your range from the power supply, or shut off the home circuit breaker. The tools you will need to do this repair include a number one square head screwdriver and a pair of needle nose pliers.

This part works with the following brands: Frigidaire, Kenmore, Tappan, Crosley, Gibson, Westinghouse, Kelvinator, Uni, Electrolux.

This part works with the following products: Range.

This part fixes the following symptoms:

  • Element will not heat.
  • Will Not Start.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Infinite Burner Switch - Small Element - 240V

Part Number 1145039

This is a part for your range. This switch controls the stovetop surface burner. If you notice that your stove top is not turning on or is not adjusting to the corresponding desired heat, it is mostly likely due to the burner switch needing to be replaced. You will need a #1 square-head screwdriver and needle-nose pliers. Disconnect the power from the range. You will need to move the range out from the wall to remove the upper back panel to access to this part. This is an OEM genuine part.

$29.34
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

Please explain the difference between part number# ps- 1145040 vs 1145039 are they the same part?

RJ for model number FEF352AWA
Answer:

Hi RJ, Thank you for your question. The switches are for different burners on your appliance. The diagram underneath your model information does outline which switch would go where on your appliance. I hope this helps.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 25 reviews What's this?
16-25 of 25
 

3 of 6 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Steven from Edina, MN

Large front burner would not come on under setting of "3"

Replaced infinite control very easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Royce from KEENE, TX

Burner not controlable

Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Sajeed from GRANADA HILLS, CA

The burner on the top left (closest to front) would not turn off.

1 - Turn off the power from the panel. 2 - Unplugged the range from outlet. 3 - Unscrewed the black hex screws from the rear panel. 4 - Took a pic of the bad infinite burner switch to ensure the correct wires would connect to the new switch. 5 - Removed knob and unscrewed switch, then replaced with new switch. Matched all of the wires to like, L1, L2, P, H1 and H2. If any wires do not exist for your switch, it is ok because not all ranges use all wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers
Customer: Jim from UNIONTOWN, PA

Switch quit working and wouldn't turn

Take handle off, then back cover. Of course unplug power. Switch wasn't built exactly like the original but all you have to do is connect each wire to the same letter, number code as on the old one . Works like brand new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: greg from SANDY, OR

Burner switch failure

Unplugged the range. Removed the top section of the back of the stove to expose switches. Removed the knob, (pulls off exposing the 2 switch screws), unscrew & pull out from the back. The new switch was slightly bigger but the same manufacture and post letters & numbers. Transfer wires one-at-a-time from the old to the new switch. Mount the new switch back in place, put the screws in and the knob on. I plugged in the stove for a quick test, HA....works perfectly. Unplugged again and put the back panel back on, plugged back in and pushed the stove back in it's hole. BEFORE; the old switch when turned down would come back on BUT stay on high, a lot of boil overs. FINALLY: when turned on, it would NOT turn off, a real fire hazard. Thank you for having an original replacement part.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Richard from Florence, OR

Burner was inconsistent the heating with red hot one minute and not the next minute

I watched the video on how to do it

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Carl from W SAND LAKE, NY

8" burners were not responding correctly to the switches

Pull range away from the wall. Unplug range. Remove back plate covering the switches. Remove defective switch. Use bent paper clip to press center of terminal connectors and disconnect terminals. Reconnect each terminal of new switch as you go to avoid confusing terminals and connectors. Re-attach switch. Plug in range and test elements. Clean range area. Push range back into place, being sure to engage the anti-tip safety device.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: JAVAD from KNOXVILLE, TN

Had no control on big burner

Replaced the switch very easily! Working great

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 7 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Joel from North Mankato, MN

Arcing could be heard (and later seen) inside the switch

Switch was easy to replace. Some hex head screws to remove the panel and two screws to remove the switch. Though the plug in positions were totally different, all the quick connect terminals were marked on both switches.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - 8" - 240V
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: Phil from KERSEY, PA

Sparking element

removed back and transferred four wires to new part and replaced back

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-25 of 25

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1145040
Manufacturer Part Number: 316436001
Brand Model Number Description
Tappan31-2232-00-01Range - Free Standing, Electric
Tappan31-2232-00-02Range - Free Standing, Electric
Tappan31-2232-00-03Range - Free Standing, Electric
Tappan31-2232-23-01Range - Electric
Tappan31-2232-23-02Range - Free Standing, Electric
Tappan31-2232-23-03Range - Free Standing, Electric
Tappan31-2442-00-01Range - Electric
Tappan31-2442-00-02Range - Electric
Tappan31-2442-23-01Range - Electric
Tappan31-2442-23-02Range - Electric
Tappan31-2452-00-01Range - Electric
Tappan31-2752-00-01Range - Free Standing, Electric
Tappan31-2752-00-02Range - Free Standing, Electric
Tappan31-2752-00-03Range - Free Standing, Electric
Tappan31-2752-23-01Range - Free Standing, Electric
Tappan31-2752-23-02Range - Free Standing, Electric
Tappan31-2752-23-03Range - Free Standing, Electric
Tappan31-2852-00-01Range - Electric
Tappan31-2852-00-02Range - Electric
Tappan31-2852-00-03Range - Electric
Tappan31-2852-23-01Range - Electric
Tappan31-2852-23-02Range - Electric
Tappan31-2852-23-03Range - Electric
Tappan31-2862-00-01Range - Electric
Tappan31-2862-00-02Range - Electric
Tappan31-2872-23-01Range - Electric
Tappan31-2872-23-02Range - Electric
Tappan31-2872-23-03Range - Electric
Tappan31-3342-00-01Range - Free Standing, Electric
Tappan31-3342-00-02Range - Free Standing, Electric