Display Control Board WB27X10858

For a couple of weeks the turntable has been moving when the door is opened. Now after rebooting there are some lights but now does not start up. Does it make sense to change out the control board?

When using the microwave, the display starts to show crazy characters such as @#, or it blanks out altogether or starts blinking. I have to reset circuit breaker just about every time I use the appliance. Need advice on what part to order and does it come with installation instruction?Thanks

Does this part include the the entire circuit board that is located behind the display read out ..... ..

Below is my original question with your answer. There is no fault code displayed. The information displayed is correct for the function being used and the unit works in a glitchy sort of way. For example; the express button must be touch several times to get the microwave running for 30 seconds. Once it is running i can add 30 seconds for each touch of the button. The countdown timer, the clock and any other function display information dances around the screen, flickering on and off. No error code has ever been displayed. Resetting the unit does not help.Thanks again, steve your question asked on part wb27x10858 with model scb1001kss01: my unit works but glitches. information flashes and dances around the display, including the clock. to start any function the touch pad has to be pressed sometimes once, but usually multiple times. is this the part i need? thanks, steve. answer: hello steven, thank you for the question. in order to trouble shoot we will need a bit more details. can you submit a new question and let us know what information is showing on the screen. we will need to have this in order to know what the fault code is. please submit a new question if you have any follow ups. we are looking forward to hearing from you.

I only see one blinking pixel in the top left of the display. None of the touch screens are working. With the door closed the turntable is rotating slowly. Do you think I need a display board or a control board? Or maybe both?

I have the advantium 120, the display has been acting up or stops working all together. I reset the fuse and it works a couple days. Sometime I can see the numbers, than they go away and all I can use is the express 30sec. Would this be the part I need? are they somewhat easy to install and is there instructions to do so?

I ordered and replaced the display control board. Following the blog on your website, that seemed to be the solution. My display was showing various characters and was off and on. Resetting my circuit breaker would take care of the problem for a little while. I replaced the display control board, but now i have no display besides 1 small Green line/character in the upper left corner of the display. Would i need to replace the display or the circuit board? Thanks peter

No power; unit is dead. I do have a small Green character in upper left. Previous post indicates to replace the circuit board. Will this also resolve the functioning of the unit?

I have an advantum 120 microwave and need to replace the display board. What is the part number for the green display board?

The display flashes erratically and only the express button works. I just replaced the Display Control Board, part PS1022528. There is no change in functionality. Any other ideas?