GE/GE_Thumb/00121543i02.gif
See part 2002 in the diagram

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Display Control Board

$ 170.76   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1022528
Manufacturer Part Number WB27X10858
Manufactured by GE
Troubleshooting
This part works with the following products:
Microwave, Microwave Oven Combo.
This part works with the following products:
General Electric.
Part# WB27X10858 replaces these:
AP3883396
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Warren
    February 12, 2018
    For a couple of weeks the turntable has been moving when the door is opened. Now after rebooting there are some lights but now does not start up. Does it make sense to change out the control board?
    For model number zsc1001ss
    Hi Warren, Thank you for your question. If the turntable is turning on its own when the door is open, then there is a problem with one of the door switches and you will need to check each one to see which one is causing the issue. I hope this helps. Thank you and have a great day!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Patres
    February 28, 2018
    Does this part include the the entire circuit board that is located behind the display read out ..... ..
    For model number SCB1001KSS01
    Hi Patres, Thank you for your question. Yes, this part is the circuit board. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Chris
    October 10, 2019
    When using the microwave, the display starts to show crazy characters such as @#, or it blanks out altogether or starts blinking. I have to reset circuit breaker just about every time I use the appliance. Need advice on what part to order and does it come with installation instruction?Thanks
    For model number SCB1001KSS01
    Hi Chris, Thank you for your question. If the display is not working correctly, you will likely need to replace the display control board. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Steve
    February 10, 2020
    Below is my original question with your answer. There is no fault code displayed. The information displayed is correct for the function being used and the unit works in a glitchy sort of way. For example; the express button must be touch several times to get the microwave running for 30 seconds. Once it is running i can add 30 seconds for each touch of the button. The countdown timer, the clock and any other function display information dances around the screen, flickering on and off. No error code has ever been displayed. Resetting the unit does not help.Thanks again, steve your question asked on part wb27x10858 with model scb1001kss01: my unit works but glitches. information flashes and dances around the display, including the clock. to start any function the touch pad has to be pressed sometimes once, but usually multiple times. is this the part i need? thanks, steve. answer: hello steven, thank you for the question. in order to trouble shoot we will need a bit more details. can you submit a new question and let us know what information is showing on the screen. we will need to have this in order to know what the fault code is. please submit a new question if you have any follow ups. we are looking forward to hearing from you.
    For model number SCB1001KSS01
    Hi Steve, Thank you for your question. If the controls on the microwave are acting erratically, you may need to replace either the electronic control board or the display board. Check the connections to the 2 parts to see if they are fitted correctly. If the connections are fine, you will need to test the parts to see which one is causing the issue. To test the the boards, you will need to check them visually for signs of damage or burning. If they show any of these signs, they will need to be replaced. We hope this helps. Thank you and have a great day.

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jeff
    April 16, 2019
    I have the advantium 120, the display has been acting up or stops working all together. I reset the fuse and it works a couple days. Sometime I can see the numbers, than they go away and all I can use is the express 30sec. Would this be the part I need? are they somewhat easy to install and is there instructions to do so?
    For model number SCB1001KSS01
    Hello Jeff, Thank you for the question. This sounds like the control board is defective and will need to be replaced. Thank you for your inquiry, good luck with this repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Peter
    November 24, 2019
    I ordered and replaced the display control board. Following the blog on your website, that seemed to be the solution. My display was showing various characters and was off and on. Resetting my circuit breaker would take care of the problem for a little while. I replaced the display control board, but now i have no display besides 1 small Green line/character in the upper left corner of the display. Would i need to replace the display or the circuit board? Thanks peter
    For model number ZSC1001KSS 01
    Hello Peter, thank you for your question. It sounds like the circuit board is the issue. We would recommend replacing that part. I hope this helps!

    Was this helpful?
    Thank you for voting!
    Carol
    December 14, 2019
    No power; unit is dead. I do have a small Green character in upper left. Previous post indicates to replace the circuit board. Will this also resolve the functioning of the unit?
    For model number ZSC1001KSS 01
    Hello Carol and thanks for writing. That icon is the demo icon. For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair http://031d26d.namesecurehost.com/mwd/scb1000_scb1001_zsc1000_zsc1001_sm.pdf If a reset does not work, you would be correct in replacing the control board itself it should resolve the issue. We hope this helps. Please contact us anytime.

    Was this helpful?
    Thank you for voting!
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS1022528
      Manufacturer Part Number: WB27X10858
      Brand
      Model Number
      Description
      General Electric
      CSB9120SJ1SS
      Microwave - MICROWAVE
      General Electric
      PSB1000NBB01
      Microwave
      General Electric
      PSB1000NWW01
      Microwave
      General Electric
      PSB1001NSS01
      Microwave
      General Electric
      PSB1200NBB01
      Microwave
      General Electric
      PSB1200NWW01
      Microwave
      General Electric
      PSB1201NSS01
      Microwave
      General Electric
      PSB9100DF1BB
      Microwave
      General Electric
      PSB9100DF1WW
      Microwave
      General Electric
      PSB9100DF2BB
      Microwave - MICROWAVE
      General Electric
      PSB9100DF2WW
      Microwave - MICROWAVE
      General Electric
      PSB9100SF1SS
      Microwave
      General Electric
      PSB9120DF1BB
      Microwave
      General Electric
      PSB9120DF1WW
      Microwave
      General Electric
      PSB9120DF2BB
      Microwave - MICROWAVE
      General Electric
      PSB9120DF2WW
      Microwave - MICROWAVE
      General Electric
      PSB9120SF1SS
      Microwave
      General Electric
      PSB9120SF2SS
      Microwave - MICROWAVE
      General Electric
      SCB1000KB
      Microwave - GE Microwave Model SCB1000KB Parts
      General Electric
      SCB1000KBB01
      Microwave Oven Combo - Counter Top
      General Electric
      SCB1000KBB02
      Microwave Oven Combo - Counter Top
      General Electric
      SCB1000KC
      Microwave - GE Microwave Model SCB1000KC Parts
      General Electric
      SCB1000KCC01
      Microwave Oven Combo - Counter Top
      General Electric
      SCB1000KCC02
      Microwave Oven Combo - Counter Top
      General Electric
      SCB1000KW
      Microwave - GE Microwave Model SCB1000KW Parts
      General Electric
      SCB1000KWW01
      Microwave Oven Combo - Counter Top
      General Electric
      SCB1000KWW02
      Microwave Oven Combo - Counter Top
      General Electric
      SCB1000MBB001
      Microwave Oven Combo
      General Electric
      SCB1000MCC001
      Microwave Oven Combo
      General Electric
      SCB1000MWW001
      Microwave Oven Combo

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service