See part 154 in the diagram
ELECTRODE TOP
$
8.18
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS1020959
Manufacturer Part Number WB13K10021
Manufactured by
GE
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint.
Part# WB13K10021 replaces these:
WB13K10016
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
October 14, 2019
We replaced the spark electrode igniter wb13k10021 hoping to fix a large front right burner that wouldn't turn on except by manually using a match stick. It now clicks but no there is still no Flame.
For model number JGBS23BEH5BB
Hi Carol, I would get a technician to take a look at it at this point. It is likely one of the gas and burner parts that is faulty. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Igniter no longer worked
remove all loose components on range top (grates, caps, disbursement / diffuser heads. Take a T-15 screw driver and unscrew each of the three screws on each burner. Have a large flat headed screwdriver ready. Lift up on the front lid of the range, it should life about 1/4 inch. There are two clips that hold it down, about 6 - 8 inches in from either side. Press then towards the back (away from you) one at a time, while lifting on the lid.. it should pop free. WARNING: if you did not remove the torx screws first, be careful are you will now bend the gas lines running to the burner. Once loose, remove the old clip from the igniter, so that it lifts free. unplug the igniter from the electrical cable (pulls out from bottom). attach new clip to new igniter and re-attach electrical line to new igniter. close lid and re-attach all torx screws. Reassemble range top and you are complete.
-
BRAD from Halethorpe, MD -
Difficulty Level:Easy -
Total Repair Time:15 - 30 mins -
Tools:Pliers, Screw drivers -
11 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1020959
Manufacturer Part Number: WB13K10021
Manufacturer Part Number: WB13K10021
Brand
Model Number
Description