This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in fact, on. The lens is a little less than half an inch in diameter and is made of plastic. If the light behind the lens still works, you should be able to simply remove the front panel and pop the damaged lens out of position, then replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Lens
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB25T10041 replaces these:
AP3860491, 1166997, WB25K0002, WB25K2
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Miranda W - February 14, 2020
Verified Purchase
Easy fix
The indicator lens on my 1963 cooktop was missing. Ordered this one, popped it in, and now it looks great again. Arrived fast too!
★★★★★
★★★★★
Debralee A - October 5, 2018
Verified Purchase
Great!
When we bought our home, the stove had a broken lens that kept falling out. We are now selling our home and wanted to fix this for the buyers so I was very thankful to find the part here! Very fast shipping and a minor repair to have the stove looking complete again! Wish we had fixed it years ago!
★★★★★
★★★★★
Sharon P - August 15, 2018
Verified Purchase
replacement
Light was popped in took 2 seconds
★★★★★
★★★★★
Mark P - March 10, 2018
Verified Purchase
Worked as expected
The part had to be sent twice as the first package was sent without the part. Fortunately the help desk assistance was superb in solving my problem.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Hot burner light lens broke off.
Pull range away from back wall. Remove panel behind control knobs by removing the screws that hold it on. Find hot burner light that holds lens. Remove broken part of lens. Insert new lens into hole on front of control panel and into hot burner light receptacle. Replace back panel. Slide range back into place.
Charles from NEKOOSA, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch and burner dead
Removed rear panel, disconnected wires, unscrewed switch X2 - installed new parts in reverse order. Note: Would have appreciated new mounting screws with replacement switch.
lens snapped off on the inside-plug was left loose
popped out the remainder of old lens, then pushed in new ones and slipped on plugs.
RICKEY from MONTROSE, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MICKEY
September 19, 2019
Burner light is still on even though all burners are off. It never goes out. Stays on all the time
For model number RB757WH4WW
Hello Mickey, thank you for writing. You will want to replace the Indicator Light, part number PS237433 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bhagwat
January 13, 2022
Locked light is on but burner is unlocked and burners are off, starting burner makes noise!
For model number PGP976SET1SS
Hello Bhagwat, thank you for your question. These cooktops have a manual gas shut off. When “LOCKED” gas does not flow to any of the burners and if a burner knob is moved to the LITE position, a buzzer will remind the consumer that the cooktop is locked. We recommend the Switch Harness Assembly PartSelect Number PS11725188. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
