The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approximately 20 inches in width. The lower spray arm will not spin if it has become clogged with debris and hard water deposits from your dishwasher, if it has become jammed by silverware, causing it to melt, or if the bottom of the spray arm has become disconnected from the bottom of the tub. If the spray arm encounters any of these issues, it will need to be replaced. To replace the spray arm, remove the lower dish rack and simply unscrew the old arm. Screw the new spray arm in until it locks into place.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bernard F - April 1, 2019
Verified Purchase
1st time at your sight.
It was perfect and the installation only took 2 minutes. Great service too.
★★★★★
★★★★★
Stephen S - May 27, 2019
Verified Purchase
Easy to install.
New but different color. Works perfect.
★★★★★
★★★★★
Felicia A - August 20, 2019
Verified Purchase
Easy repair
Website provided easy way to find the specific part needed and video shows how to install. All worked great!
★★★★★
★★★★★
Jeffrey F - August 5, 2020
Verified Purchase
Easy Repair
Fast and easy installation once received. Works great.
★★★★★
★★★★★
Thomas B - March 8, 2019
Verified Purchase
Part worked just fine.
I like being able to get parts easily to keep my appliances working just like new.
★★★★★
★★★★★
John P - June 12, 2019
Verified Purchase
GE Lower Spray Arm
Installed easily and was reasonably priced. Arrived very quickly.
★★★★★
★★★★★
Daniel S - April 23, 2020
Verified Purchase
Genuine part - Easy fix for just about anyone to perform on their own!
Genuine GE part that took less than 5 seconds to replace. My GE Profile dishwasher is now just as quiet as it was when I first bought it. Thanks for the guidance and great price Partselect.com!
★★★★★
★★★★★
Bernard S - March 3, 2018
Verified Purchase
Worked perfectly.
Fast delivery. Correct part. Can’t ask for more
★★★★★
★★★★★
Alejandro R - May 16, 2018
Verified Purchase
Easy replacement. Excellent figure display online to determine right part
Part was in new condition
★★★★★
★★★★★
Nelson M - December 23, 2018
Verified Purchase
Easiest repair
This part fit perfectly. Worth every penny and the install was the easiest fix I’ve ever done. Good product, good price, and reputable store.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Heat shield on lower spray arm came loose and blocked spray arm from turning
Followed instructions on how-to video on website on how to remove and replace lower spray arm.
Jack D from CLEBURNE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our dishwasher lower arm had become clogged
HAHA! The easiest repair we have ever done! Took it out of the box, snapped the old arm loose, put the new arm in and -- the dishwasher works like new! Thank you!
M Anne from VIENNA, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Food particles had started stopping up spray arm and get them out.
Pulled old spray arm off and snapped new one on. Less than 3 minutes and works great. Dishes are cleaner now.
carla from valdosta, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dish Washer not cleaning well, spray arms not turning much all ttree had mineral build-up and even trash in them.
Ordered and replaced all three spray arms. The upper and middle spray arms were quickly replaced with a net-driver and are now working much better. The lower spray arm required no tool, just turn it CCW and lift it up. After replacement lower spray arm is still not moving at all. Maybe the lower spray arm washer is defective or the pum
... Read morep is just not putting out enough water. Will consider further repairs or replacement of the dish washer, it is 13 years old and used daily.
I watched the video, read the instructions and went to work. This was the easiest repair I have ever done. I'm 71 and if I can do all 3 spray arms in a total of 15 minutes, anyone can. The hardest part was getting up off the floor when I was finished. The spray arms were all clogged, we have very hard water.
This was very easy. 1) roll out lower rack, 2) rotate lower arm slightly counter-clockwise and lift it out, 3) install new lower arm by dropping into position and rotating clockwise. 4) roll in lower rack, and roll out upper rack, 5) use a nut driver to remove the retaining bolt/screw from the upper arm - it's in the center of the upper
... Read more arm and you have to work from underside of upper rack, 6) remover upper arm, 7) install new upper arm by holding in position and re-inserting the retaining bolt/screw. 8) Tighten the retaining screw and make sure upper arm freely rotates.
My dishwasher was doing a terrible job of cleaning. It was leaving food on dishes, and wasn't dissolving all the detergent. I replaced all the spray arms and the filter, as they seemed clogged, and god knows how old. It's a super easy repair, and the dishwasher now works as if it were brand new.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
August 1, 2017
How do I remove the bottom spray arm?
For model number ZBD6880K10SS
Hi Fred,
Thank you for the great question! Once you remove the racks you can turn the lower spray arm counterclockwise while pulling up and it will lift out and then reverse the steps to install the new one.
Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
May 8, 2019
What is the purpose of the two flat metal parts on the lower spray arm?
Hi Tony,
Thank you for your question. The metal pieces on the underside of the lower spray arm are heat protectors. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Archana
February 4, 2023
Is there a removable filter that needs cleaning for this type of dishwasher. If yes where is filter and how to clean
For model number GSD6660G10SS
Hello Archana, thank you for your question. Yes, the Filter is PS958919 and we have a video to show you where it is and how to replace it. Hope to hear from you!
Detergent is not desloving. Detergent door opens but detergent is still there, parcially desloved.
For model number GLD4400N00WW
Hi Ralph, thank you for your question. There are a couple of parts that could cause the issue that you are having. I would suggest first check your heating element. If your water is not getting hot enough then your detergent will not dissolve. You may also want to make sure that you dispenser is working as well. If that part is not releasing the detergent at the right time that also may be why it does not dissolve all the way. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Cathy
April 29, 2019
Does lower washer arm part 501 come in a white/cream color?
For model number GHDA480N10WW
Hello Cathy, thank you for your question. Unfortunately, that part does not come in a white/cream color, only gray now. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1020205
Manufacturer Part Number: WD22X10047
