Drive Pulley Kit WH07X10016 | Official GE Part | Fast Shipping | PartSelect
Drive Pulley Kit – Part Number: WH07X10016
Drive Pulley Kit – Part Number: WH07X10016 Drive Pulley Kit – Part Number: WH07X10016 Drive Pulley Kit – Part Number: WH07X10016 https://partselectcom.azureedge.net/Schematics/GE/00124590i04.gif

Drive Pulley Kit

Product Description

Drive Pulley Kit Specifications

This part is used to turn the drive belt with the help of the motor or transmission.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Noisy | Shakes and moves | Pumps but will not spin | Will not agitate

This part works with the following products:

Washer.

This part works with the following brands:

General Electric.

Part # WH07X10016 replaces these:

1168657, AP3866999, WH07X10016.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your General Electric Washer Drive Pulley Kit

Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
BRETT from CLINTON, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WH08X10024, WH07X10016
Rear Tub Pulley became loose and deformed pulley shaft
Ordered new Parts. Removed old/worn parts. Found that the "hammering" from a loose pulley had worn and deformed the edges of the shaft where the flats are to accept new pulley.
Gently filed the flats with the flat surface of the file and filed the hump on the shaft that the "hammering" created. Take extreme caution to not file surfaces too much, because new pulley will be loose and the next step is to replace the drum shaft.($$$$) Pulley did not fit 100% (Had some slop) but that was from material being worn away from "hammering" effect. Torqued with Torque wrench and added green 609 loctite compound - this is meant to help adhere and take up some loose fit in assemblies. - Drawback to Loctite is most have to be heated to 300 to 400 degrees to remove, or pulley will need to be cut off and ruined, I further repair/removal of pulley is necessary. This is an Easy Fix/Replacement of parts.... The hard part is filing the drum shaft surfaces to accept the new pulley, and getting the belt back on - Belt is tight but needs to be stretched on like putting a bike chain back on.

Washer now spins and sounds like a dream!
- Good Luck!
172 of 230 people found this instruction helpful.
Was this instruction helpful to you?
Daniel from SAMMAMISH, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Parts Used:
WH07X10016
Loud banging noise when in the spin cycle
I followed the steps in the You Tube video on this topic. Search for "washing machine repair - replacing the drive pulley" in your favorite search engine. The video is very well done and it is a simple fix. Before I put on the new drive pulley and nut, I vacuumed up and then wiped down the black dust around the drive pulley shaft (as well as on the inside floor of the washer) to make sure the drive pulley slid onto the shaft using the hand banging method described in the video (dust was likely from the belt due to the excessive movement of the drive pulley). While it may be possible to tighten the nut without a torque wrench, I personally had trouble judging the appropriate 44 ft lbs of torque without it (i.e. my snug required more than a quarter turn per the optional instructions). The torque wrench provided me with the assurance that I installed the drive pulley correctly.Two of my shocks were leaking slightly so I assumed that was the primary issue and replaced all 4 at quite a hefty cost. It helped with the noise but not significantly. If you do have a loud noise during the spin cycle, do yourself a favor and check the play in the drive pulley and look for the black dust before you diagnose the problem to be something else. The online diagnostic tool showed the drive pulley as being the highest probability of being the issue so, sadly, I have no excuses...
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
4 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive Belt
$64.48
PartSelect #: PS1020114
The main drive belt is designed to work with the motor pulley and spin the drum until it comes up to speed. NOTE: Per factory measures 48.4" at rest & 51.2" when working.
NUT M16
$14.14
PartSelect #: PS1020771
Model Cross Reference

This part works with the following models:

PartSelect Number: PS1016963
Manufacturer Part Number: WH07X10016
Brand
Model Number
Description
General Electric
GBVH5140H0WW
Washer
General Electric
GBVH5140H1WW
Washer
General Electric
GBVH5200J0WW
Washer
General Electric
GBVH5200J1WW
Washer
General Electric
GBVH5200J3WW
Washer
General Electric
GBVH5200J4WW
Washer
General Electric
GBVH5200K0WW
Washer
General Electric
GBVH5300K0WW
Washer
General Electric
GBVH6260F0GG
Washer
General Electric
GBVH6260F0WW
Washer
General Electric
GCVH6260F0GG
Washer
General Electric
GCVH6260F0WW
Washer
General Electric
GCVH6260H0WW
Washer
General Electric
GCVH6260H1WW
Washer
General Electric
GCVH6400J0WW
Washer
General Electric
GCVH6400J1WW
Washer
General Electric
GCVH6400J2WW
Washer
General Electric
GCVH6500K0WW
Washer
General Electric
GCVH6500K1WW
Washer
General Electric
GCVH6600H0BB
Washer
General Electric
GCVH6600H0GG
Washer
General Electric
GCVH6600H0MB
Washer
General Electric
GCVH6600H0MS
Washer
General Electric
GCVH6600H0WW
Washer
General Electric
GCVH6600H1BB
Washer
General Electric
GCVH6600H1GG
Washer
General Electric
GCVH6600H1MB
Washer
General Electric
GCVH6600H1MS
Washer
General Electric
GCVH6600H1WW
Washer
General Electric
GCVH6800J0BB
Washer