GE/GE_Thumb/00116954i02.gif
See part 58 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dual Radiant Element - 9 Inch

★★★★★
★★★★★
11 Reviews
$ 175.42   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 10785-2!
 Fits your 10785-2!
PartSelect Number PS1016539
Manufacturer Part Number WB30T10099
Manufactured by GE
Product Description

Dual Radiant Element - 9 Inch Specifications

This is a large dual haliant element with a limiter or sensor for glass cooktops and freestanding ranges. It is a 2500-watt part. The inner diameter measures 9 inches, while the outer diameter measures 10 inches. If there is no heat generated from your element, you may need to replace this part. You may also need to check your socket or infinite switch. It is located under the glass cooktop of your appliance. Be sure to unplug or cut the circuit breaker to your appliance before starting this repair. Before replacing this part, be sure your appliance is getting enough power. If it is receiving less than the required 220 volts of alternating current, the surface element will not work.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
General Electric, Kenmore.
Part# WB30T10099 replaces these:
AP3860678, 1167353, WB30K5032, WB30T10035, WB30T10044, WB30T10050
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Sharon
    July 12, 2021
    Will this fit a GE profile cooktop burner element for front right
    Hello Sharon, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Rich
    November 22, 2021
    What is the part number for the front rt dual burner? Has that part number changed.
    For model number JP350B0C1BB
    Hello Rich, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS16225972. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 25 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Large burner on dual element burned out
      This was really easy, and pretty with no problems or issues It took me longer to write this than to do the actual installation. I used a digital camera to help me remember where things were, but a pen/paper works fine. Here's what I did:

      1. Turn off the breaker for the cooktop.

      2. Remove (2) 1/4" hex screws directly under cooktop. You may need to open oven door to reveal them.

      2. Prop up cooktop. I used the box the replacement element came in.

      3. The element is held in place with (3) brackets held in by a #2 philips screw each. Mark the location of each of the brackets. There are numbers on the element to help you do this.

      4. Write down where each of the wires connects to the element. There's only a few of them, but I tend to forget that stuff. The wires have female spade-type connectors that connect to the male ends on the element.

      5. Using a needle-nose or small pliers wiggle each wire off the element. Grab the wires by the end of the female connector when you do this. I found it helpful to use a small flat screwdriver to help pry them off. Mine were on pretty tight, so expect this to take a few mins. If you have problems getting to the wires, remove the brackets (next step) first and come back to this one. I let the element hang from the wires without any problems, but I still wouldn't recommend it.

      6. Remove each of the screws with a #2 philips screwdriver. Support the element with your hand and gently pull each bracket away from the element. Once they're all gone, the element should just come out. I took a look at my old element and saw that the large burner wires were melted in a couple places, so it was definitely broken.

      7. If necessary, clean the underside of the cooktop surface with a clean papertowel. There was a little dust from the old element on mine.

      8. Connect the new element and test to make sure it works by turning on the breaker and turning on the burner for a second or two. Note: This will make the top of the element hot for some time, so test it and go away for a few mins. If it works OK, proceed. If not, disconnect and figure out what else may be wrong.

      9. Using the old element, make copies of the marks you made for the bracket locations onto the new element. You'll have to punch through the insulation when re-attaching the screws.

      10. Re-wire the new element, if necessary and re-attach the brackets over the marks you made. This may be a pretty tight fit because the new element was thicker than the old on mine. I opened up the brackets a bit to make it not so hard to re-attach. Hook the brackets on and squeeze them over the element. The holes in the brackets need to line up with the holes drilled into the bottom of the element. If they don't, spin the element around (or detach and re-attach the brackets) till they do.

      11. Screw in the (3) screws over the brackets pushing them through the insulation on the element.

      12. Close the cooktop and reattach the hex screws under it (1/4" hex).

      13. Turn on the breaker and test again.

      Thats it, works great now. Good Luck
      • Scot from Oakland, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers, Wrench (Adjustable)
      98 of 111 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Two part burner, outer ring not working
      The outer ring on the adjustable large haliant surface burner of our smooth top stove would not work. It would only work on the small (inner) size.

      Found the part on this site, ordered, 3 days later, and it was fixing time.

      2 screws removed to lift cooktop, 2 screws to remove old burner and disconnected 4 electric clips one at a time and placed them in same position on new burner. Replace the 4 screws and done.

      VERY SIMPLE.
      • JERALD from PHENIX CITY, AL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Screw drivers
      34 of 39 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Inner element of dual burner died
      -Turn off breaker
      -Undo the two screws that hold the top surface down
      -Prop up top surface with a board
      -Remove two screws/spring clips holding burner
      -Transfer electrical plugs to new burner (this was the most challenging part)
      -Screw new burner in place
      -Lower surface
      -Secure surface
      • Van from Hyde Park, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      18 of 20 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Center of large burner stopped working.
      First and foremost, I am a 63 year old cooky baking GRANDMOTHER. I don't know anything about fixing appliances. I read the other repair stories pertaining to my burner and I thought, "why not."
      It was a snap!

      My part arrived the very next day, bless you Parts Select! I just did what the others (see above) did: I removed 2 screws to release the stove top, then I took a few digital photos to be sure I would know where the wires went. I released the old burner, pulled out the thingamajigs that held the wires in the old burner, then pushed the new ones in their place, replaced the stove top, plugged it back in, turned it on and jumped for joy! If I can do this, anyone can.
      • paula from East Grand Rapids, MI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers, Wrench (Adjustable)
      14 of 15 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Burner "burned out" so we replaced the one and replaced the other that seemed to be cooling down.
      Basically removed the screws holding the op on and removed the vent from back. Just "figured it out" and now it works. Wish I could be more helpful. Recommend moderate experience and confidence.
      Other Parts Used:
      Large Haliant Burner with Limiter - 8"
      • Cheryl from Sequim, WA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      13 of 22 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Outer ring of burner did not work
      1- opened oven door
      2- unscrewed 2 screws underneath top with a socket wrench
      3- unscrewed clips that held burner
      4-used needle nose pliers to pull off wire clips off old burner
      5- placed wires onto new burner
      6- opened clips to make it easier to reinsert burner
      7-reattached burner
      8-Replaced top

      The hardest part was unscrewing the 2 screws that held the top in place due to the position of the screws
      • Barry from Bradenton, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers, Socket set
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      outside element burned out
      . First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two plugs.
      plugged in the new element and screwed it in place
      • peter from westfield, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The dual burnner had somthing drop on it and it went out
      I pulled out the range from the wall unplugged it from the wall then i opened the oven door and removed the two small screws on the front off the range and lifted the glass top and supported it with a 1/2" X 18inc wooden dowel, then i removed the two burner retaining screws with a small Phillips screw driver and removed the wires from the burner,
      then i replaced the burner with the new one and reconnected the wires and placed the burner in to the two retaining clips and then tightened the two screws then i removed the wooden dowel and installed the two screws on the front bottom side on the range then i plugged in the range in and tested the burner then put the range back against the wall.
      • Thad from Layton, UT
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Burner Was Not Working
      Removed the two screws that hold the range top down. Lifted up yhe range top and propped with a stick. Proceeded to mark the wires connected to the old burner so that the new one would be connected correctly. Removed the wires and then the two brackets that hold the burner in place. Removed the old burner and installed the new one. Connected the wires and resecured top to base. Turned on the current and it worked beautifully.
      • Roland from Miami, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The front right outer element was defective.
      My cooktop is a stand alone unit mounted in a counter top not associated with an oven.
      -Removed power to the cook top. Breaker off.
      -Lifted the cook top straight up from the counter top and placed two 24 inch board strips to support it above the counter top. This was very easy by pushing up from the bottom of the cook top. This is a two person job preferably.
      -Removed the six phillip screws below the glass surface edge. 3 in the front, three in the back.
      -Remove knobs and remove the glass top by lifting straight up.
      -Record the wire positions on the element on paper and remove the connections.
      -The element is mounted on two spring loaded studs that have spring clips as a retainer. Remove the two clips by pulling straight up with a plier or needlenose.
      -The replacement element did not come equipped with the two mounting ears that the original had. I removed the two ears from the defective element and installed them on the new element. Very easy. Two phillips screws. The elements have perferations in the correct areas to accommodate this.
      -Placed the new element in position and reinstalled the spring clips.
      -Install the wiring terminals in the correct positions.
      -Reinstalled the glass surface and the six phillips screws. Reinstall the knobs.
      -Lower the cook top back into its counter top position.
      -Return power to the cook top.
      -Installation complete. Very simple!
      • Peter from Abbeville, LA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      11 Reviews
      4.9
      Filter By Rating:
      • 5 Stars
        10
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS1016539
      Manufacturer Part Number: WB30T10099
      Brand
      Model Number
      Description
      General Electric
      10781-1
      Range
      General Electric
      10785-1
      Range
      General Electric
      10785-2
      Range
      General Electric
      10785-3
      Range
      General Electric
      10787-1
      Range
      General Electric
      10791-1
      Range
      General Electric
      10791-2
      Range
      General Electric
      11791-2
      Range
      General Electric
      11791-3
      Range
      General Electric
      12781-1
      Range
      General Electric
      12781-2
      Range
      General Electric
      12785-1
      Range
      General Electric
      12786-1
      Range
      General Electric
      12787-1
      Range
      General Electric
      12791-1
      Range
      General Electric
      12891-1
      Range
      General Electric
      12891-2
      Range
      General Electric
      14786-1
      Range
      General Electric
      15891
      Range - Electric Range
      General Electric
      15891 1
      Range
      General Electric
      158911
      Range
      Kenmore
      91142404100
      Cooktop - 30" COUNTER UNIT
      Kenmore
      91142414100
      Cooktop - ELECTRIC COOKTOP
      Kenmore
      91142612100
      Cooktop
      Kenmore
      91142617100
      Cooktop
      Kenmore
      91142619100
      Cooktop
      Kenmore
      91142701100
      Cooktop
      Kenmore
      91142702100
      Cooktop
      Kenmore
      91142704100
      Cooktop
      Kenmore
      91142709100
      Cooktop

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service