Infinite Control Switch WB24T10119 | Official GE Part | Fast Shipping | PartSelect
Infinite Control Switch – Part Number: WB24T10119
( Grid squares measure 1x1 inch )
Infinite Control Switch – Part Number: WB24T10119 Infinite Control Switch – Part Number: WB24T10119 Infinite Control Switch – Part Number: WB24T10119 Infinite Control Switch – Part Number: WB24T10119 https://partselectcom.azureedge.net/Schematics/GE/00120326i01.gif

Infinite Control Switch

PartSelect Number PS1016429

Manufacturer Part Number WB24T10119

Manufactured by GE

Product Description

Infinite Control Switch Specifications

This part is sold individually and is for ranges. The control switch turns the surface element on and off and determines the temperature of the element. This will need to be changed if the control switch has failed and the cooktop is not turning on. It is found underneath the glass cooktop. Before beginning, make sure the circuit breaker is off. You will need to remove the cooktop from the counter. To do this you will need to go underneath and see what kind of brackets are holding it in place. The brackets will vary depending on the make and model and type of countertop is it laying on. These brackets will need to be removed.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Element will not heat

This part works with the following products:

Range, Cooktop.

This part works with the following brands:

General Electric, Kenmore, Hotpoint.

Part # WB24T10119 replaces these:

1166982, AP3873795, WB24K10066, WB24T10032, WB24T10057.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
17 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 9 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
John from Fresno, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WB24T10119
Switch failed
I turned off the circuit breaker and tested the cook top. I pulled the cook top out and laid a piece of plywood over the opening to work on the cook top and not scratch the granite counter top. The mistake I made was to turn the cook top upside down and separate the top from the housing. The dampening springs came off the burners and I could have damaged the elements (but they checked out ok). I turned the whole assembly right side up again and replaced the switch and put it all back together. It works great...thank you for the part.
31 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Rodney from Erath, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WB24T10119
Electric range burner not working due to control switch
Turned off power to counter top range and pulled-up from counter. Set range on counter and removed 16 screws from around the housing allowing me to pull-up and remove range top. Used socket to remove 4 screws holding control switch bracket in place and 2 screws holding bad switch in place. Disconnect wires from bad switch and reconnected to new switch. Placed and screwed switch bracket back in place. Before placing range top back I turned power back on to to test burner operation. Burner and switch operated correctly and I completed screwing range top back in place, setting back down into counter top. Done
21 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Al from Ocala, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WB24T10119
RF Dual Burner out. Smoke in the area of controls
Shut off circuit breaker. Removed cooktop from island counter. Removed all knobs. Removed all screws after finding layout diagrams of unit on your web site. Lifted glass top from metal cabinet. Ordered control after trouble shooting the problem. (Master Electrician). Obviously burned out from water in control. Ordered control on line and installed it when it arrived three days later. Before installing control I cleaned and dried out the area. I cleaned the glass top around all the control shaft holes and the rubber boots and lubricated them with silicone to help keep them dry and for ease of turning controls. Turned on circuit breaker and checked all burners, pilot light and hot top indicating lights.
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Gary from CLEARWATER, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WB24T10119
Control awitch was bad
Just note the wire colors and match them where they go on the new control, remove and replace 7 screws and a zip tie and I was done.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Terri from Leesburg, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WB24T10119
Two burners were not working
I got someone to look at the stove. They told me what I needed. I looked all over the Internet and couldn't find the part. One guy told me just to buy a new stove top because mine was an antique. It still looked good and two burners were still working. I didn't give up. I found the part on partselect bsite and was thrilled. It shipped fast and was exactly the right part. Now my stove works like new.
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Jim from MILFORD CTR, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WB24T10119, WB30T10046
Front left burner not heating enough
June 2019
0. TURNED OFF CIRCUIT BREAKER !!!
1. Lifted cooktop out of counter cutout. (It wasn't anchored)
2. I had just enough slack in the armored power cable to set the cooktop on the edge of the countertop cutout.
3. Removed black plastic control knobs
4. Removed about a dozen short screws around perimeter of cooktop. I think those were phillips head screws.
5. Lifted glass top straight up. Had to wiggle it a bit, to get the rubber washers on the control shafts, to slide up.
6. The new heater element did not have the 2 alignment brackets. These brackets have holes that slip over metal pins at each end. So, I removed the brackets from the old element, and attached them to the new element.
7. Set new heater element on top of old. Using needle nose pliers, pulled wires off of old element and clipped onto new element - ONE AT A TIME.
8. Slide old element out, and place new element brackets over alignment pins.
9. Now, on to the Infinite control switch. Removed a few screws around the metal housing that the controls are attached to.
10. Removed the 2 screws that hold the control to the metal housing.
11. Switched wires from old control to new - ONE AT A TIME. (Pay attention to the position of the wire blades on the control, and align it to match the old control, so that you will get the wires from the old control, onto the correct blades of the new control.)
12. Attached new control to metal housing, using 2 screws.
13. Re-assemble - Place glass top over control shafts.
14. Attach glass top by installing all of those short screws around the perimeter.
15. Place cooktop back into countertop cutout.
16. Turn on the circuit breaker.
17. Test all heating elements.
-------------
Other notes - I actually removed the entire cooktop, including disconnecting the power connection, so that we could replace our kitchen countertop.
One issue was that the new quartz countertop was 3/8" thinner than the old Formica top. So, the bottom of the cooktop was resting 3/8" lower than before. The shallow drawer below the cooktop was now hitting the bottom of the cooktop. My solution was to cut 3/8" off the back of the drawer. Problem solved.
Good luck y'all.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Ezekiel from FLORISSANT, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
WB24T10119
Replace Infiniti Switch
Turn off breaker, disconnect electrical wiring, remove cooktop from courter top, turn over , remove switch.
1 person found this instruction helpful.
Was this instruction helpful to you?
kathleen from Wynantskill, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
WB24T10119
cooktop switch broken
Really easy. Part came in rapid time and was the right part. Went on web and got instructions with video how to install.
1 person found this instruction helpful.
Was this instruction helpful to you?
John from CENTERPORT, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Parts Used:
WB24T10119
knob thermostat burnt out
it went well as compared to getting a new ~~800$ cooktop and ~~150 to install, I took a shot for 30$ bucks and it worked great!! problem solved and great support ! !! thanks for all your help
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
5 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS1016429
Manufacturer Part Number: WB24T10119
Brand
Model Number
Description
Kenmore
36342482200
Cooktop
Kenmore
36342484200
Cooktop
Kenmore
36342489200
Cooktop
Kenmore
36343482200
Cooktop
Kenmore
36343484200
Cooktop
Kenmore
36343489200
Cooktop
Kenmore
91142404100
Cooktop - 30" COUNTER UNIT
Kenmore
91142414100
Cooktop - ELECTRIC COOKTOP
Kenmore
91142701100
Cooktop
Kenmore
91142702100
Cooktop
Kenmore
91142704100
Cooktop
Kenmore
91142709100
Cooktop
Kenmore
91142711100
Cooktop
Kenmore
91142712100
Cooktop
Kenmore
91142719100
Cooktop
Kenmore
91199002990
Range
Kenmore
91199002991
Range
Kenmore
91199002992
Range
Kenmore
91199003990
Range
Kenmore
91199003991
Range
Kenmore
91199003992
Range
Kenmore
91199004990
Range
Kenmore
91199004991
Range
Kenmore
91199004992
Range
Kenmore
91199009990
Range
Kenmore
91199009991
Range
Kenmore
91199009992
Range
General Electric
CBC980SN1SS
Range
General Electric
CBC980ST1SS
Range
General Electric
CBC980ST2SS
Range