This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Linda H - July 15, 2020
Verified Purchase
Easy to find on website; easy to repair!
The came fast!
★★★★★
★★★★★
Christopher A - June 6, 2019
Verified Purchase
Easy repair good price
Good quality. Fast shipping. Repair was easy my 6 yr old daughter helped out. The original block melted and came loose touching the wires to the body of the dryer. I bought a few items from this site while I had the dryer apart. Everything fits good.
★★★★★
★★★★★
Danny R - April 9, 2019
Verified Purchase
easy to install
Ok, this part is what it is, it’s very easy to install, anybody can do, it takes all but 5 minutes to do, 99.9% of the time it will never need to be replaced. My biggest complaint is shipping, over $7.00 to ship the part, and it still took 9 days to reach me, it would have been faster with pony express. This seems to be the norm for Part Select, which is bad, because when you order something like this, you need it ASAP.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original terminal grounding block melted for unknown reason.
Unscrewed the old, screwed in the new making sure wires matched up same as before. Reset my breaker and works like new again.
Manuel, J from MCALESTER, OK
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not heating. When moving it away from wall it was sparking badly where the cord hooks up.
Removed case parts to expose internal wiring. Vacuumed up various types of mouse debris and plugged hole they were using. Ordered terminal block to replace the one that melted while sparks were flying. Replaced power cord with one I had in my basement from some other appliance that died a while ago. "Hey honey, ya know those old parts I s
... Read moreaved..." :) Now it is heating to capacity and no spark-show! Oh yeah, the part I ordered from Partselect.com was delivered to my door the next day!!!!! Wow!
Read less
Vincent from Washington, PA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
22 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
December 22, 2017
The dryer will not start with door opening to the left. Reversing door and dryer will work. Do the 4 screws that i can see on dryer front allow front panel to come off to replace door switch to allow door opening to left. What is this contact switch called? Thanks
For model number gtd42easj2ww
Hello Jim, Thank you for your inquiry. Yes, the front panel will come off and the door switch is part# WE10X23879. Although we do not have a repair video for this exact part number, I have included a link to a similar GE model to show you how to remove the front panel and replace the switch.
https://www.youtube.com/watch?v=PplQ8nYObrE Good Luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 5, 2018
I have no life in the dryer once plugged in, no lights on control panel it acts like it is not even plugged in. I have verified power source and checked continuity on all fuses at the power block any suggestions as to where to start
For model number GFDN120ED1WW
Hi Mike, Thank you for the question.This sounds like an issues with the control board. I suggest checking to make sure the wire harness is fully secure on the board.You can also test the terminal block for the power cord. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jamie
December 2, 2017
Has power but won't start
For model number gtd33eask0ww
Hi Jamie, Thank you for the question. I suggest testing the Push to start switch,Part Number: PS3487190 and the Door switch, PartSelect Number: PS11729233. These switches are used to activate the dryer.Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
April 23, 2019
My 2 year old GE dryer has power at the plug and power all the way to the machine but will not cut on. I have no lights or anything. Working one day not the next.
For model number GTD65EBSJ3WS
Hi John, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. If all of those parts are fine then the issue might actually be in your control board itself. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Danielle
February 8, 2019
My dryer just quit working when i turn the nob for time it still makes the normal noise..i changed the door sensor checked the belts and the seal on the door, everything looks fine. but when i press start it's still not turning on. what else could it possibly be?
For model number htx24eask0ws
Hello Danielle, Thank you for contacting us! I suggest checking the following parts: PS1766009 Drive Belt, PS3487190 Push-to-Start Switch, and PS11729233 DOOR SWITCH. Good luck with your repair!
Was this helpful?
Thank you for voting!
Jason
August 12, 2017
Does the terminal block part come with the screws?
For model number dcvh680ej0ms
Hi Jason,
Thank you for your inquiry. This part comes with those three screws that you can see directly on the part but unfortunately does not come with any others. I hope this helps.
Was this helpful?
Thank you for voting!
Brittany
April 24, 2018
What size screw comes with the terminal block and grounding strap?
For model number GTDN500EM1WS
Hi Brittany,
Thank you for your question. There are 2 types of screws that you will need for the terminal block and both are sold in packages of 12. The part numbers listed under your model number for the packages are PS312722 and PS312570. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Tom
August 21, 2019
Thermal block melted what else can i expect to have to replace other than the cord also
For model number Dnsb514eboww
Hello Tom, Thank you for the question. As long as no other parts have visible damaged they can be reused. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
