Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeff F - November 30, 2018
Verified Purchase
Great fit
Everything needed was there. My snow thrower didn’t have a scraper bar just the scraper. I wish it had instructions to clue me in this may not be used. I hope I installed it correctly.
★★★★★
★★★★★
Frank Z - November 8, 2018
Verified Purchase
Augers
Nice having all the parts to do a job including new screws.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Scraper bar and flight worn past wear limit.
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl
... Read moreied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements. Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Read less
Duane from RICHFIELD, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
January 15, 2019
Will this fit 22 inch
For model number 1695885
Hi Richard, thank you for your question. Yes this is the correct kit listed underneath your model information. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matt
October 17, 2023
Do these fit the ST 151?
For model number ST 151
Hi Matt, thank you for the question. Based on our research, the part mentioned is not compatible with your model. The scrapper bar for your model comes separately and not in a kit. The part number for the compatible scraper bar is PS9982105. We hope this is helpful!