Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer stops in middle of cycle and E53 appears on the screen
1 you have to order a new motor control board 2 unscrew the back panel 3 unscrew the top panel 4 unscrew the bracket 5disconnect the old motor control board 6 connect the new motor control board
Baruch from HURLEYVILLE, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
While using washer a E9F code appeared and stopped working.contacted parts select trouble shooting site they told me what it was ordered the part they were right on!back washing again thanks so much for the help!
Did it with no problems at all just followed the video step by step worked great done in 1hour!
Stephen from DELTONA, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brad
December 10, 2018
If getting error code e53 on Frigidaire affinity front load washer, does this mean motor control board needs replacing?
For model number FAFS4474LA0
Hello Brad, thank you for your question. The E53 error means that the drum speed control board (centripetal motor switch) is giving an abnormally low voltage. Check the wiring between the main control board and the speed control board and if the wiring checks ok then replace the speed control board. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
February 12, 2019
I'm getting a e9f code on my washer what does that mean?
For model number Eifls60lt1
Hello Steve, Thank you for contacting us. This error code indicates a communication error between the main control board and the motor control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Miguel
December 23, 2017
Is this the display at the front of the washing machine where it shows the washing time and the program?
For model number FFFS5115PW
Hello Miguel,
The display part number is PS10063114.
I hope this helps.
Hi Barry,
Thank you for your question. The E52 error code is letting you know that there is a bad signal coming from the motor tachometer. You will need to test the tachometer with a multimeter. Before you test the tachometer, unplug the washer. You should have a resistance between 105 and 130 ohms. If you do not get this reading, replace the drive motor. If you do get a reading between 105 and 130 ohms, you will need to replace the speed control board next to the motor. We hope this helps! Good luck with the repair!
My washer is getting a e55 error code. It goes through the whole wash cycle just agitating back and forth but never does the fast spin cycle at the end. Does this point to the speed controller board?
Hello Steve, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
