Whirlpool/Whirlpool_Thumb/01KP7ZC6.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Dishwasher Rack Adjuster Kit - White Wheels

★★★★★
★★★★★
152 Reviews
$ 47.06   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS10065979
Manufacturer Part Number W10712395
Manufactured by Whirlpool
Product Description

Dishwasher Rack Adjuster Kit - White Wheels Specifications

This authentic Dishwasher Upper Rack Adjuster Kit with white wheels is a kit made up of primarily plastic and metal components, and which will require a screwdriver to install. This kit comes with all the necessary parts for a dishwasher rack adjuster. It fits onto dishwasher rack and connects it to the track allowing it to slide in and out. If broken then the rack will no longer slide properly, and the part must be replaced. In many cases, our customers have reported the top rack of their dishwasher hanging down or sagging due to the adjuster kit, particularly the wheels, have broken or failed. If you are having problems in this area, this kit will help get your dishwasher back up and running. Check your model number and user manual to see if this part is right for you. The parts for this kit come as a package and are not generally sold individually. Please see as follows for detailed repair instructions: First you will have to remove your upper dish rack and the old adjust kit. Now, when installing the new kit, count 4 rungs from the back of the basket toward the front. Take your new metal adjuster and thread the shaft through the fourth rung. You may have to tilt it to get it through. When you straighten the part the portion of the wheel should be on the outside of the rack and the shaft will be on the inside of the rack. Take your positioner clips and use them to secure the adjuster to the rack. You will see two front tabs and two back tabs. The back tabs will also need to be tilted into place so that they are on the inside of the rack. The flat part of the positioner clips should be on the outside of the rack. Then you will push the clips down on to the adjuster to clip them into place. Now you will have to install the adjuster body on to the adjuster. Pull your adjuster all the way down. Tilt the adjusted toward the inside of the rack, you will notice that the adjuster body has a channel that will fit the adjuster. Slide those two pieces into place together. You will have 4 notches on your adjuster body that fit perfectly with your rack. Pull-on your metal adjuster to lock it into place. Grab your actuator. You want to make sure that the thumb pad of your actuator is facing toward the inside of the rack and is closer to the front of the rack. Pull the adjuster arm up as far as you can, so that the body is a little bit above the top of the rack. The set the actuator inside of the two slots at the top of the body. You may have to tilt the body toward the inside of the rack to fit the actuator into place. Once you have that part in place, push the whole assembly down and press it back up against the side of the rack into place again. Now you will take the adjuster cover and install it on to the body from the outside of the rack. There is a little tab at the top of the cover, you will have to push that into place in the slot at the top of the adjuster body. That just snaps down into place. Then you install your two T15 Torx screws into the cover to hold it into place. This installation is the same for both sides.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t close | Not cleaning dishes properly | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid.
Part# W10712395 replaces these:
AP5957560, W10250159, W10350375, W10712395VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

45 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steven
December 3, 2018
My top rack is hanging down because the wheel has broken off. Can i get just the wheel or do i need a kit? If yes, which kit?
For model number WDT970SAHZ0
Hello Steven, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS10065979. The wheel is only sold as part of the Rack Adjuster Kit. Thank you for your inquiry, good luck with this repair!

37 people found this helpful.

Was this helpful?
Thank you for voting!
David
February 5, 2018
Can you send me instruction and pictures to install the upper rack wheels and brackets to the rack. They are not like the ones that are on it now thanks
For model number WDT910SAYM1
Hi David, Thank you for your question. First you will have to remove your upper dish rack and the old adjust kit. Now, when installing the new kit, count 4 rungs from the back of the basket toward the front. Take your new metal adjuster and thread the shaft through the fourth rung. You may have to tilt it to get it through. When you straighten the part the wheels portion should be on the outside of the rack and the shaft will be on the inside of the rack. Take your positioner clips and use them to secure the adjuster to the rack. You will see two front tabs and two back tabs. The back tabs will also need to be tilted into place so that they are on the inside of the rack. The flat part of the positioner clips should be on the outside of the rack. Then you will push the clips down on to the adjuster to clip them into place. Now you will have to install the adjuster body on to the adjuster. Pull your adjuster all the way down. Tilt the adjusted toward the inside of the rack, you will notice that the adjuster body has a channel that will fit the adjuster. Slide those two pieces into place together. You will have 4 notches on your adjuster body that fit perfectly with your rack. Pull on your metal adjuster to lock it into place. Grab your actuator. You want to make sure that the thumb pad of your actuator is facing toward the inside of the rack and is closer to the front of the rack. Pull the adjuster arm up as far as you can, so that the body is a little bit above the top of the rack. The set the actuator inside of the two slots at the top of the body. You may have to tilt the body toward the inside of the rack to fit the actuator into place. Once you have that part in place, push the whole assembly down and press it back up against the side of the rack into place again. Now you will take the adjuster cover and install it on to the body from the outside of the rack. There is a little tab at the top of the cover, you will have to push that into place in the slot at the top of the adjuster body. That just snaps down into place. Then you install your two T15 Torx screws into the cover to hold it into place. This installation is the same for both sides. I hope that helps. Good luck with your repair.

13 people found this helpful.

Was this helpful?
Thank you for voting!
Celine
June 12, 2019
Hi, the white wheels of the upper rack broke. Is the part w10712395 (rack adjuster kit - white wheels) compatible with my model wdt780saem1? It this the sturdiest version? Thank you!
For model number WDT780SAEM1
Hello Celine, thank you for writing. This is the correct replacement for your model. It is the only replacement listed for it.

8 people found this helpful.

Was this helpful?
Thank you for voting!
Carrie
June 17, 2019
The top rack falls down on the left side because the plastic adjuster (?) is broken away from the white wheel that is in the track. I can’t find the adjuster for sale for my model dishwasher.
For model number 665.14573N611
Hello Carrie, thank you for writing. This Rack Adjuster Kit part PS10065979 is compatible to your model.

8 people found this helpful.

Was this helpful?
Thank you for voting!
Kali
September 4, 2019
Hi there! The top drawer is hanging on one side because the plastic piece broke so the white wheel cannot attach. Can you verify that this part is correct for my model Whirlpool wdt730pahz0 thank you!
For model number Whirlpool wdt730pahz0
Hello Kali, thank you for your question. Yes, the PartSelect Number: PS10065979 is the correct adjuster kit that you will need to repair the unit. I hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Sarah
March 21, 2019
Hello, I only need a roller replacement kit for one side of my dishwasher, not both sides. Is it possible to just buy a kit for one side? (part w10712395)
For model number Wdt780saem1
Hello Sarah, thank you for your question. Unfortunately, the manufacturer only sells the kit that includes parts for both sides. Good luck with your repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Andrew
January 7, 2019
The right hand side of the upper rack isn’t connected to the metal track anymore and therefore can’t hold any weight on the right side. Is there a better part to fix this.
For model number wdt790slym3
Hello Andrew, thank you for your question. The rack adjuster kit has been redesigned as the original adjuster was not as stable and was causing issues for customers. The adjuster kit would come with all parts for the right and left side of the upper rack and would be the only parts that would fix the issue you're having. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Kathi
August 7, 2019
The top rack of my dishwasher falls down as the clips that go into the wheels are broken so they slide out of the wheels and the rack falls down. All of them on both sides are like this. What parts would i need to buy? My model# is 665.14263k112 and the serial# is f24805333. Kenmore. Thanks.
For model number 665.13263K112
Hi Kathi, for model 665.14263k112 you would be looking for part W10712395 and positioner part WPW10195840 if this part is missing. Thank you for your question and good luck with your repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
LUCIENE
January 12, 2018
I need the part ( uper rck and track parts # w10350375how can a get this part?
For model number KUDS30IXSSA
Hello Luciene, Thank you for your inquiry. The part number that is compatible to the model you supplied is W10712394. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Corey
October 9, 2019
The plastic piece on the upper rack has broken off the cage side of the unit (piece fits into the white wheel in the track on the outer wall) as a result the entire upper rack falls down off the rollers onto the rack below, can you help me with the replacement part to repair? Thanks!
For model number WDT910SSYM0
Hello Corey, thank you for inquiring. You will need this Rack Adjuster Kit, part number PS10065979 for your model to get that piece. Good luck with your repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Dishwasher Dishwasher Rack Adjuster Kit - White Wheels

Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 25 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Instruction from Whirlpool Not Good (No problem with Part Select)
Trial and error. The instructions from Whirlpool included with the part had minuscule pictures so it was hard to follow. The written instructions were good. But "a picture is worth a thousand words." Eventually it worked. The metal replacement part is much better the the plastic original. Not a good reflection on Whirlpool.
  • Richard from OAKLAND, CA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
  • Parts Used:
    W10712395
35 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Roller wheel on dishwasher broke
OEM roller wheels were on plastic shaft which broke. Replacement was on stainless steel bracket with metal shaft, better quality. Don't think I will have to replace again.
  • Richard from LAKEWOOD, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W10712395
24 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The factory guide wheel snapped off of the plastic rack support
I followed the installation instructions included with the kit, they are not the clearest or the most detailed but they allowed me to finish the job in under 15 minutes. Only one side was broken but I replaced both sides in the time. Not a big job and very easy for a DIYer with average mechanical ability.
  • Gregg from HALFMOON, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W10712395
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper rack wheels had begun to break off. Shoddy design and materials.
I carefully followed the video instructions step by step. They were detailed, clear, and pointed out how to avoid installation mistakes. WIthout the video I would have been tempted to just figure it out myself - ("Hey, I'm a handy guy. How hard could it be, right?"). With the video I sailed right through with no dumb errors. The new rack adjuster wheel set is much sturdier than the Whirlpool original. It made sense to get new rack stops at the same time. Thank you, PartSelect.
  • Steven from WASHINGTON, DC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP8565925, W10712395
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack adjuster wheel broke. Had to replace entir unit.
The install video was invaluable, and made installation a breeze. Unfortunately it did not include instructions to remove the original adjuster — which was of a slightly different design as the replacement. I eventually got the old part off using a screw driver to pry the plastic snap connections apart.
  • David from SEATTLE, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W10712395
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rack adjusters on the machine had failed. The wheels had broken off.
I did this repair after watching the video on PartSelect's website. It went exactly as it was shown on the video. The video did not show removal of the old components. None of the old adjuster parts need to be saved for re-use so if they break upon dis-assembly it does not matter. This project went about as well as a project could. I certainly recommend this repair using the parts on PartSelect's website. Very good!
  • Robert from MINOT, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W10712395
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken part
repair was easy. Pictures in the instruction not clear had to refer to old parts
  • steven from GREER, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W10712395
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels on the upper rack kept coming off
What I needed were simple clips to lock in the wheels. I ended up getting a kit that required replacement of the roller tracts on both sides of the upper rack. The instructions were terrible. The repair took far more time than it should have. Once one side was fixed it was easy to fix the other side. By then I had worked my way around the muddled instructions.
  • Robert from THE WOODLANDS, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
  • Parts Used:
    WPW10195840, W10712395
6 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pictures need to be more clear would help tremendously
Follow directions
  • Scott from OLATHE, KS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
  • Parts Used:
    W10712395
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel broke off of dishwasher top rack
I followed the directions on YouTube and the paper that came with the part. The only problem is the 'little tabs' that they act like are easily pushed are rather more difficult since you don't want to break the things off.
  • Glenajo from ROCKWALL, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    W10712395
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
152 Reviews
4.5
Filter By Rating:
  • 5 Stars
    112
  • 4 Stars
    24
  • 3 Stars
    8
  • 2 Stars
    3
  • 1 Star
    5
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10065979
Manufacturer Part Number: W10712395
Brand
Model Number
Description
Kenmore
66513202N410
Dishwasher - DISHWASHER
Kenmore
66513202N411
Dishwasher - DISHWASHER
Kenmore
66513203N410
Dishwasher - DISHWASHER
Kenmore
66513203N411
Dishwasher - DISHWASHER
Kenmore
66513204N410
Dishwasher - DISHWASHER
Kenmore
66513204N411
Dishwasher - DISHWASHER
Kenmore
66513209N410
Dishwasher - DISHWASHER
Kenmore
66513209N411
Dishwasher - DISHWASHER
Kenmore
66513222N410
Dishwasher - DISHWASHER
Kenmore
66513223N410
Dishwasher - DISHWASHER
Kenmore
66513229N410
Dishwasher - DISHWASHER
Kenmore
66513262K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513262K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513262K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513262K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513263K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513263K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513263K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513263K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513269K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513269K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513269K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513269K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513362K110
Dishwasher
Kenmore
66513362K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513362K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513363K110
Dishwasher
Kenmore
66513363K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513363K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513369K110
Dishwasher

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service