See part 127 in the diagram
( Grid squares measure 1x1 inch )
Water Filter
$76.40
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
Subscribe to save!
Subscribe to get on your entire order today, and on all automatic reorders!
Deliver every:
PartSelect Number PS10063209
Manufacturer Part Number RPWFE
Manufactured by
GE
Product Description
Water Filter Specifications
Household water can often contain impurities that can affect the taste, quality, and health of the water your family is consuming. This NSF certified filter helps to reduce a lot of these contaminants. A good way to judge whether the filter needs to be replaced is when the water flow to the dispenser starts slowing down and there has been no change to the water pressure to the product. It is also recommended to change it every six months to ensure it is working at peak performance. This filter is found in the left-hand corner of the fresh food compartment or within the left refrigerator door. It measures 9.75 inches high,1.625 inches wide, and weighs 0.4 lbs. After installation is complete run two gallons of water through the cold water dispenser to get rid of any air. For icemaker-only models, throw out the first bin of ice to remove air.
There are two common models for this filter, one that has a grey holder and one that has a black holder. The installation and removal instructions vary slightly.
Grey Model: Pull the bottom of the old cartridge allowing it to swing outward. Pull to free the cartridge from the holder without twisting it. To install the new filter, center it with the holder, making sure the word ?FRONT? is facing forward and centered. Swing the filter inwards until it is positioned.
Black Model: Pull on the bottom of the old cartridge to unlock it from the clips. Swing it outward until you hear a clicking sound. Now twist the cartridge one-quarter of a turn counter-clockwise. Pull it out to remove. To install the new filter, match the filter cartridge with the holder, making sure the word ?FRONT? is facing the top of the appliance. Push the filter toward the back of the appliance until it is secured. Twist it clockwise one-quarter of a turn so the word ?FRONT? is facing outward. Swing filter inward until it is secured.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not dispensing water
This part works with the following products:
Refrigerator, Dryer.
This part works with the following products:
General Electric.
Part# RPWFE replaces these:
AP5955761, RPWF, RPWFE2PK
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
November 13, 2017
How do you open the refrigerator compartment that houses the water filter? Do you push, pull, or twist the tab at the front end of the compartment. I do not wish to break anything. Once i'm in, i know how to insert the filter (rpwfe),
For model number PWE23KSKBSS
Hi Paul,
Thank you for your question. There is no need to turn the water supply off to the refrigerator before replacing your filter. To locate the filter look into the upper left corner of the refrigerator. When you have located the filter, place a towel on the shelf just under where the filter is in case any water spills out. Open the door and swing the filter to the right until it stops. The filter will not release until it is in this position and simply pull the old cartridge out without twisting it. Align the top of the new filter in the holder with the word front facing outward. Firmly push the filter in until it engages to insure it is properly seated. Again being careful not to twist the filter. Swing filter back into place and close the filter door. If your filter does not swing into place, make sure that it has been aligned and engaged properly. I hope this helps. Thank you and have a great day!
51 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
April 30, 2018
How do i change the water filter
For model number Pwe23kmdbes
Hello Dave, thank you for your question. To locate the filter look into the upper left corner of the refrigerator. When you have located the filter, place a towel on the shelf just under where the filter is in case any water spills out. Open the filter door and swing the filter to the right until it stops. The filter will not release until it is in this position and simply pull the old cartridge out without twisting it. Align the top of the new filter in the holder with the word front facing outward. Firmly push the filter in until it engages to insure it is properly seated. Again being careful not to twist the filter. Swing filter back into place and close the filter door. If your filter does not swing into place, make sure that it has been aligned and engaged properly. I hope this helps. Thank you and have a great day!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
July 24, 2019
How do you remove the old filter?
For model number RPWFE
Hello Greg, Thank you for the question. When you have located the filter, place a towel on the shelf just under where the filter is in case any water spills out. Open the door and swing the filter to the right until it stops. The filter will not release until it is in this position and simply pull the old cartridge out without twisting it. Align the top of the new filter in the holder with the word front facing outward. Firmly push the filter in until it engages to insure it is properly seated. Again being careful not to twist the filter. Swing filter back into place and close the filter door. If your filter does not swing into place, make sure that it has been aligned and engaged properly. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
February 13, 2018
Looking for a dummy filter or cap/plug for refrigerator filter on this model.
For model number DFE28JSKFSS
Hello Larry, thank you for your question. The Water Filter Bypass Plug for your unit is part number WR17X23645. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Azucena
December 22, 2017
Hi...i followed the steps to change the filter, reset it and now is not dispensing water...is this something i'm doing wrong?
For model number PS10063209
Hello Azucena, Thank you for your inquiry. I would try taking the filter out and make sure the lines are clean. I have included the installation steps as well. If your fridge still is not dispensing water I would check your water inlet valve and the line that runs from it to the filter. Hope this helps!
Before removing the old filter, place a cloth beneath the filter to catch the few drops of water that may fall when the filter is removed. Grasp the filter and turn it to the left until it stops, while gently pulling downward from the filter head. Keep the filter level to minimize water spillage. (If the filter doesn't come loose easily, air may be trapped inside. To relieve any pressure, push in on the water dispenser; the filter should drop right out.) Remove and discard the plastic cap from the new filter. Fill the top of the replacement filter with water from the tap. Place the filter inside the cartridge holder by aligning the arrow on your filter with the cartridge holder. Push the filter gently upward to engage the top of the cartridge in the filter head. Slowly turn the filter to the right until the filter cartridge stops turning. As you turn the cartridge, it will automatically rise into position. After the filter has been replaced, trapped air must be purged out of the system. Select Water on the dispenser selector and press the pad until water begins to flow. The first few ounces of water may sputter due to air in the replacement filter. This is normal. Continue to dispense approximately 1-2 gallons of water to make sure all air is purged from the system.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kimberly
January 17, 2018
What chemicals, poisons and other things does the filter filter out of our water? Does it filter out pesticides? Thanks
Hi Kimberly, Thank you for the question.This filter reduces 98% of contaminants including lead and mercury.Tested and verified to reduce five trace pharmaceuticals, including: ibuprofen, progesterone, atenolol, trimethoprim & fluoxetine. Certified to reduce chloramines and chlorine taste and odor, for better tasting water and ice.Certified to reduce chlorine-resistant cysts, lead, select pharmaceuticals and 15 other contaminants, very sorry but we do not have the full list of the other 15 contaminants. Replace filter every 6 months or 300 gallons.Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Marlyn
February 21, 2019
After changing the filter, how much “oz” of water to properly purge the water ?
Hello Maryln, Thank you for your question. You should be flushing 3-5 gallons of water through the filter before drinking. Have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sandra
May 9, 2019
I think i broke where the filter goes on can not replace it the new filter will not fit
For model number Pye22kskhss
Hi Sandra,
Thank you for your question. You will need to replace the filter manifold. The part number listed under your model number for the filter manifold is PS6447739. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
JON
May 27, 2019
New water filter will not go in. The old filter was hard to pull out. It seems that one of the small ears broke.
For model number GYE22KMHHES
Hello Jon, thank you for your question. If you're having issue with inserting and removing the filter you will want to replace the water filter head PartSelect Number PS6447739. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bruce
September 30, 2019
What is correct water filter for this model?
For model number pyd22kslgss
Hello Bruce, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10063209. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace old filter with new water filter.
Remove old filter by pulling and not twisting and insert new filter by pushing in place.
-
Barbara from EDMONDS, WA -
Difficulty Level:Very Easy -
Total Repair Time:Less than 15 mins -
Tools: -
Parts Used:RPWFE
27 of 78 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace water filter in icemaker
This was the first time I took out the old filter on my new refrigerator and added the new one. It was a little hard getting the old one out because I was afraid to pull on it but it did come out ok and was easy to put the new one in.
-
Marcia from LAKELAND, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:RPWFE
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Vicky Z - 27 days ago
Works like a charm
Received the water filter and installed it successfully. Filter works perfectly and water is great.
Charmaine T - March 3, 2021
Water filter replacement.
I receive my parts and was very satisfied and it fits perfectly.
Stacy R - November 11, 2020
Great selection
It was delivered fast and was easy to install
Russell M P - October 18, 2020
Water filter
I am on the auto fulfillment program. I love it.
Part is easy to install.????
Julie W - September 17, 2020
Proud of myself
This is the third time I have ordered this kind of part. I am so pleased that I am able to change the filter myself. I don't have to call a repair person. It was easy to install and I have pure water and ice.
Thomas W - July 15, 2020
Very dissatisfied - GE water Filter
Using Part Select I was charge roughly 40% more than I would have paid if I had gone to GE directly. I am very disappointed. Also, there was no way to find out about my order because no one could be reached by email or by phone.
Laura H - July 9, 2020
Part worked as expected
The filter was easy to install, and works great.
Russell M P - April 24, 2020
Easy to install.
The part was very easy to install and working properly after a short five minute flush.
Larry L - August 26, 2019
Refigerator water filter GE
Part came in good condition. Worked as described but could be an easier install from a design standpoint. A snap in version versus a twist and turn without a tactile locking mechanism would be a better Pokey Yoke.
The rice of the filter is also less than desirable.
Nathan P - August 16, 2019
Water filter
Works just fine
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10063209
Manufacturer Part Number: RPWFE
Manufacturer Part Number: RPWFE
Brand
Model Number
Description