The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is having difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. Before you make this repair remember to unplug your range from the power source, and turn off the gas shut off valve.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Temperature Sensor
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Oven not heating evenly | Oven is too hot | Element will not heat
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alfred P - November 4, 2023
Verified Purchase
Right part
The part was the right one and worked perfectly
★★★★★
★★★★★
Janet L D - September 5, 2023
Verified Purchase
All went well
I was glad to finally find a place that made part selection easy and foolproof. My sensor arrived quite quickly. It has been working perfectly for a few weeks now and I expect it will continue to do so. I am glad it was an OEM part as well. Great service!
★★★★★
★★★★★
Jerry B - August 25, 2023
Verified Purchase
worked as expected
it worked
★★★★★
★★★★★
Roger O - June 16, 2023
Verified Purchase
perfect
exactly what I needed...
★★★★★
★★★★★
Kevin R - March 31, 2023
Verified Purchase
Easy repair
Part was shipped fast. Website was easy to navigate correct part. The only downside was having to pull the double unit out from in the wall to get it swapped out but easy plug-and-play fix.
★★★★★
★★★★★
Elaine B - March 16, 2023
Verified Purchase
Worked just fine.
Unfortunately it wasn't as easy as the video showed but after installation, it worked just fine. Hopefully, it will keep our stove working for another 10 years. Thanks for great products.
★★★★★
★★★★★
Brenda J - April 24, 2022
Verified Purchase
Easy repair
Very happy . Part came fast and oven is now working great
★★★★★
★★★★★
Heidi F - March 12, 2022
Verified Purchase
Saved me a lot of money!
I thought I'd have to find a repairman to fix my oven, or worse, replace it. I searched the error code and went with the sensor rather than the control board. The video was helpful.
Easy repair. Took me about 10 minutes. Works great!!
The delivery was quick!
Winner!
★★★★★
★★★★★
Kyle L - January 28, 2022
Verified Purchase
Easy replacement
Installation was easy as the website promised. The part took a long time to arrive. This was likely the shippers issue as I received the “just shipped” notice soon after my order and then it was over 2 weeks in shipping.
I will buy from here again.
★★★★★
★★★★★
Robert S - October 1, 2021
Verified Purchase
easy repair
part was exactly the same shipping was very slow!!!!!!!!!!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 29 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
F2 error; over heating, unknown reason
I just followed the instructions on the link provided with the part
Tim from LEAVENWORTH, WA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Actual temperature in oven was not consistent with the temperature setting
I am a 69 year old woman. I watched the Repair Clinic YouTube Video before I started. I then pulled stove away from wall and unplugged it. Took off oven door and removed the top oven rack. Loosened and removed the screw holding the temperature sensor located inside at the top center back wall of the oven. Pulled the sensor through th
... Read moree opening until the plastic plug came through. Unplugged and removed it and plugged in the new sensor. Fished it back through the opening. Replaced the bracket to the back wall of the oven and tightened the screw. Replaced the oven rack and stove door. Plugged it back in and moved it back into place. I turned on the oven and let is heat for over 30 minutes and the internal temperature was correct with the setting.
Read less
Martha from WILMINGTON, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Temp. went too high and the door locked. Burnt the food
This temperature sensor is very easy to replace. There are two screws inside the oven in the top middle of the back of the oven. Take these off. on the back of the stove there is a metal plate with 5 screws I believe. Take these off with a nut driver. Then you will see a white connector coming from the spot where you took the other screws
... Read more off. Take the white connector apart and pull out the temperature sensor from the inside of the oven. Then put the new one in.
Read less
Nathan from BILLINGS, MT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven is off 10 degrees
I changed out the sensor and still same problem. Change out Thermosat and still same problem. I call the help number and emailed the help but I got nothing but have to many calls because of the virus situation. Still need help. I’m an electrician and I don’t want to call a service technician and pay that big bill.
... Read moreCan anyone there help me out, if so please call. Ike Stanton 678-525-6644
Read less
Ike from LOGANVILLE, GA
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven did not get up to or hold the correct temperature
This should have been a very easy fix. But, as I tried to pull out the old temperature sensor, the wire would not come out. I was afraid to pull too hard because I did not want to break the wire. So, I coxed it out easily until I could see the plastic connector. Then, the old wire pulled free from the connector leaving the end of the c
... Read moreonnector inside the back of the oven. I then had to fish the end of the wire around with the piece of wire through the very small hole in the back of the oven. Once I got it close to the hole, I was able to grab the connector with some needle nose plyers. Connecting the new sensor and reinstalling everything was easy and the oven now works just fine.
Read less
Robert from ARROYO GRANDE, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F2 Error on Display
The repair was very easy to do. Our oven was showing the F2 error code, which is associated with an over-temperature fault. Upon inspection, the oven was warm, but definitely not beyond the temperature threshold. I researched the issue and found this temperature sensor. Swapping the sensor was extremely easy. You take off the back pa
... Read morenel of the oven, unhook a single wiring harness, and undo some bolts inside the oven, which allows you to pull off the old sensor. Simply hook up the new sensor to the harness, pull everything back through, replace the fasteners, and you're good to go.
Read less
Tom from FORNEY, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Incorrect oven temperature due to defective temperature sensor.
Performed repair using a video for reference.
Anthony from FARMINGVILLE, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
temp sensor in oven was failing.
I picked the least expensive and most likely issue with our oven that was not indicating a correct oven temperature. I am sure with a 15+ year appliance that the circuitry is on its way out but wanted to give this a try to avoid a new appliance purchase. Oven pre-heat setting takes much longer to finish with the age of the oven. However,
... Read moreafter the new sensor the oven will maintain a more even temperature for the cycle.
Removal of the sensor from the inside of the oven is a bit awkward since it is located between the broiler elements at the back but a nut driver was the correct tool and worked fine. A bit stuck with the heating of the connection but pretty simple to replace. Must remove the back first to uncouple the connector. Simplest part of the repair.
At best a temporary fix for a an appliance this old.
Read less
Chad from FRANKLIN, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove overheated with an F2 error
Removed screws holding temp sensor, pulled wire out from behind wall until found connector, disconnected old sensor. Measured resistance of old sensor and compared with new sensor, they measured nearly the same. Installed the new sensor and tested the stove. Came up to temp ok. No problem since, about 2 weeks.
Richard from PHOENIX, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
GE oven showed "F2" error code and was over-heating
I am not the handiest person in the world, and this repair was easy even for me. If you suspect that the temperature sensor is the problem, do yourself a favor and buy this inexpensive replacement part and install it yourself prior to calling a professional who will charge a service fee just for checking it out. Pull your oven out from
... Read morethe wall so you can access the back. Unscrew the small nuts on the back to remove the sheet metal cover. Find the wire that goes to the sensor and unplug the plastic coupling. In the oven, unscrew the one nut that secures the sensor to the back wall of the oven. Pull the broken sensor out and replace it with the new sensor. Feed the wire through to the back and plug the new sensor into the same wire that was just disconnected. Reinstall all of the nuts. Do a "test cook" on some frozen food to ensure that the temperature seems correct (i.e., does it cook as expected in the recommended amount of time). The actual repair takes less than five minutes. I put "30-60 minutes" to account for unplugging the oven, pulling it out, removing the screws, replacing the screws, pushing it back in, and testing the temperature.
Read less
Kyle from AURORA, CO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
75 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
July 20, 2017
When turning the oven on it starts to warm and then a code f2 appears and oven shuts off
For model number Jb650dt1ww
Hi Stephen, thank you for your question. If your oven is not warming, the oven temperature sensor is likely the problem, and replacing it with this part will solve that. The F2 code means there is a problem with the temperature. If you'd like to do more research before buying a replacement sensor, you can test the sensor with a multimeter (make sure the range is at room temperature, unplugged, and disconnect the sensor first). The sensor should read about 1100 ohms, if it is off, replace the sensor with this part. I hope this helps with your repair!
35 people found this helpful.
Was this helpful?
Thank you for voting!
Betty
March 29, 2018
My electric oven does not heat to the set temperature. I set temperature pre heat to 350 degrees. Display on stove control panel will show 350 degrees after pre heat but the thermometer that I placed inside the oven only reads about 225 degrees.Then I let the oven cool off and set the preheat to 250 degrees display show 250 degrees after preheat but the thermometer that was placed inside oven did not rise at all. Object got warm but I could reach in with bare hand and take it out. Guess I have a problem. What might it be?
For model number JBS55DM2WW
Hi Betty, Thank you for the question. This sounds like an issue with the Temperature Sensor, PartSelect Number: PS10059162.The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is having difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
August 11, 2017
Oven starts warming and gets to about 250 degrees and temp stops climbing (set to 350 degrees). Is it the element or the temperature sensor that may be bad?
For model number J2B918SEK3SS
Hi Chris,
Thank you for the question. If the oven is not reaching the set temperature but the element is still getting hot, you will need to replace the temperature sensor.
Hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
February 27, 2019
After setting the temp on the oven, it will indicate it is up to the set temp but is actually 20-60 degrees cooler than indicated. Does this sound like the temperature sensor? Thanks
For model number PT970SM1SS
Hi Carol, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
James
September 7, 2017
After installing new element. Oven gets to temperature but new bake element overheats and does not shut down
For model number JBP24WOK1WW
Hello James, thank you for contacting us. If the oven temps are not consistent then it could be the temperature sensor sending bad readings to the control board. You can test this with a multi-meter. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If you get a reading that is far off from that, you will need to replace the sensor. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Dawn
November 17, 2017
My oven starts out fine but doesn't maintain heat. Best to replace the sensor or both sensor and heating element?
For model number JB700DN2WW
Hi Dawn,
Thank you for your question. I would actually suggest testing both your element and your temperature sensor first to see which part is malfunctioning. You can test both of those parts with a multi meter. If they are both testing in working condition, then it may be your electronic control board that is the issue. I hope that helps. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
SHAUN
December 22, 2017
Hello my oven works when on broil but wont for bake took element had it tested it was fine also my oven light will only work when its on broil otherwise it goes out? How do i test the temperature sensor? Does it sound like thats the problem?
For model number jks06g003b
Hello Shaun, Thank you for your inquiry. You can test the part with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Don
December 11, 2018
On "bake" as opposed to "convection" the oven will show the set temperature on the display but maintain a constant temperature 30 - 40 degrees cooler. So say if set at 350 degrees it will indicate that it has come to temp. I wai a few minutes and then shut it off and restart it and it will say say its only at 318 and will kick on to raise the temp. We have tried different temps and it consistently does the same thing. We have tried baking things (potatoes) and they take a lot longer than normal. Also tried an independent t-stat in the oven.
For model number ge profile oven
Hello Don, thank you for your question. The most likely cause of this heating issue is the oven temperature sensor. This is the part that senses the internal temperature. It could also be an oven control board issue. There are ways to test the sensor. Please feel free to resubmit the question with the model number of the appliance and we will be happy to help you find the correct part number and testing information. Look forward to hearing from you!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Myra
April 23, 2018
My oven is taking 25 minutes to reheat to the standard 350 degrees. It used to take only about 10 minutes. What part might i need?
For model number JB620DR1BB
Hello Myra, thank you for your question. The most likely issue is the temperature sensor, part number WB21X22134. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is having difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor is tested and is working okay, the the issue is likely with the electronic control board. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
September 16, 2017
Oven won't turn on. Worked last time used
For model number JGS905SEK2SS
Hi Fred,
Thank you for your question. There are a number of parts you may want to check. I would suggest checking your oven sensor and your ignitor. If both of those parts are fine, you may have to look into your electronic control board. I hope that helps. Good luck.