Part Location Diagram of 5304497424 Frigidaire Oven Probe
See part 42 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Oven Probe 5304497424

 Fits your GGF354CHSE!
★★★★★
★★★★★
3 Reviews

Rated by 6 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 24.85
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GGF354CHSE!
PartSelect Number PS10057397
Manufacturer Part Number 5304497424
Manufactured by Frigidaire
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Oven Probe Specifications

Also known as a temperature sensor. This part is used to detect the temperature within the oven cavity. **The following instructions only apply if the connector piece is different than the original.** Prior to cutting the leads, please check the length of the wire you will need. 1. Cut the leads on your original sensor and the replacement sensor. Be sure to leave enough length to strip and splice the new probe and original connector together. 2. Strip the insulation, or wire cover, back approximately 1/4 inches on the new probe and original connector. 3. Twist the ends of your new probe and original connector together 4. Use a wire nut, or another high heat fastener to cover your exposed wires. 5. Install your new oven probe and re assembly your oven.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Oven is too hot | Little to no heat when baking | Will Not Start | Oven not heating evenly
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Frigidaire, Tappan, Kenmore, Gibson.
Part# 5304497424 replaces these:
AP5951458, 3018012, 3018668, 316072000, 316101700, 316111200, 316111202, 316134900, 3202382, 3204593, 5304414780, P295003
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

13 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger Neal
March 14, 2018
I set oven to bake and set temperature. The bake element just continues to glow red hot and oven gets extremely hot. Have to hit cancel to shut oven off. Also temp light on controls is very dim.
For model number FEF367CATA
PartSelect logo
Hi Roger, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. Also check the bake element to make sure it is working correctly as well. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
STAN
March 1, 2018
How do i test part #ps10057397 ? Door lock seems to work . Also checked switch on door lock--ohms 0.00 answers when i select ps10057397 refer to gas range ??
For model number FEF369CGSE
PartSelect logo
Hi Stan, Thank you for the question. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
August 7, 2019
I set temp at 375. Then i hit pre heat. When the buzzer and goes off and light goes out my temp. Is only325 or lower.Could this be the oven probe ????
For model number FGF 354 BGWA
PartSelect logo
Hello Paul, thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If that is tested and is within that range, the issue would be the electronic board. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
September 23, 2019
Does 5304497424 replace ps11757456 on this model?
For model number Arg7303ll
PartSelect logo
Hello Tom thank you for writing . Yes it does. Part Number : PS11757456 .is in the list of compatible items for your model. Hope this helps . Please contact us anytime.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joey
December 5, 2019
Can someone please give men or link or if this part works for my model of gas range. Please and thank you it is close to christmas and i would really liuke to have a working over.
For model number GLGF388CSB
PartSelect logo
Hello Joey, thank you for your question. The correct oven sensor probe is PartSelect Number: PS12724046 for this unit. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Frank
April 10, 2023
When to oven will not shut off even after pressing the cancel button and the display shows 'Ero-3', will an oven sensor OEM # 5304497424 correct the problem?
For model number FrigidaireFEF389WJCB
PartSelect logo
Hi Frank, thank you for reaching out. Based on the description that you have provided, we would recommend checking the broil element, part number PS453940, as it might have shorted out. If the broil element is shorted out, the oven may not turn off. Inspect the broil element for holes or blisters. To determine if the broil element is shorted out, use a multimeter to test the element for continuity. If the broil element shows continuity from the terminals to the outer case, this indicates that it is shorted out and you may need to replace it. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Peter
October 25, 2019
Oven heats to 500 degrees no matter what temperature is set at. Will this part fix the problem?
For model number 30-4942-23/02
PartSelect logo
Hi Peter, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Dan
November 12, 2019
I have an oven that does not heat up. I have looked high and low for a thermal fuse but do not see one. Resistance is in spec for the element. Does this part control how the element heats up? I have not checked resistance as i was assuming it was a thermal fuse to which i cannot find. Any help would be much appreciated. Thanks!
For model number CGEF3059TF
PartSelect logo
Hello Dan and thanks for writing. This is a temperature sensor. This part fixes the following symptoms: Oven is too hot | Will Not Start | Little to no heat when baking | Oven not heating evenly. Chances are this will fix your problem however you also should check the element itself. We hope this helps. Please contact us at any time

Was this helpful?
Thank you for voting!
Adam
August 13, 2019
My oven doesn't heat up on broli at al, l and bake very slow and convection bake alright. The stove top works fine. But checked voltage anyways. Thought the broil element was done, so got a new one but wasn't that. Tested temperature probes ohms and didn't get the 1080, so could the temperature probe cause that or is it a computer. I don't see anything fried.
For model number 970-678520
PartSelect logo
Hi Adam, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Albin
August 26, 2017
I turn on the oven with the controls and the igniter glows but the gas does not turn on the stove portion works perfectly. I believe it to be the temp sensor but wanted to make sure
For model number FPGF3685LSA
PartSelect logo
Hello Albin, thank you for contacting us. If the igniter is glowing but the oven is not lighting then the igniter is faulty. If the igniter is not drawing enough power the gas valve will not open. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The temperature was irratic the entire time the stove was on. I would set it for 350 and it would go up to 425 then down to 275. It was all over the place.
It was great. We ordered the part, it was shipped the next day and I had it the day after that. It was easy to install and the stove has worked perfect since. Color us happy!
  • Jenifer from St. Marys, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
f3 alarm
Removed screws. Unplugged temp sensor. Put screws back in. So easy a caveman could do it.
  • jeff from portage, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the oven stoped working and an F3 displayed on the board also a smell of gass was present
thanks to you 'r assistsnce First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, and changing the regulator was just as easy.
Other Parts Used:
REGULATOR
  • juan from hallandale, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F3 Error
I removed the back panel, about 6 screws, then found the probe which was attached by 2 screws. Unscrewed them and unplugged it. Plugged the new one in and replaced all the screws. The oven works like a charm now! No more F3 errors!
  • Jonathan from Lewisburg, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat up-panel kept showing F-3
Pulled out the stove, removed the screws that held on the back panel, took out the 2 screws that held in the element and disconnected the wires and put the new one in. I put the screw back in and was finished!
  • Marilyn from Richmond, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
24 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
error sensor on display when oven was used
I looked up the error code on line and found it was likely a faulty oven temp sensor. I was able to find the part and diagram at partselect.com and placed an order. The probe was in stock and arrived within a couple days. The repair took only about 20 minutes and works fine now. Thanks for your help partselect.com!
Jim
  • James from Clarence, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
2.7
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10057397
Manufacturer Part Number: 5304497424
Brand
Model Number
Description
Frigidaire
2281
Range - GAS RANGE
Frigidaire
28586
Range - FRIGIDAIRE GAS RANGE
Frigidaire
285860A
Range - GAS RANGE
Frigidaire
285860B
Range - FRIGIDAIRE GAS RANGE
Frigidaire
285860C
Range - FRIGIDAIRE GAS RANGE
Frigidaire
285867A
Range - GAS RANGE
Frigidaire
2891
Range - GAS RANGE
Frigidaire
2899A
Range - GAS RANGE
Tappan
30-3859-00-01
Range - Gas
Tappan
30-3859-00-02
Range - Gas
Tappan
30-3859-00-03
Range - Gas
Tappan
30-3859-00-04
Range - Gas
Tappan
30-3859-23-01
Range - Gas
Tappan
30-3859-23-02
Range - Gas
Tappan
30-3859-23-03
Range - Gas
Tappan
30-3859-23-04
Range - Gas
Tappan
30-3860-00-01
Range - Gas
Tappan
30-3860-00-02
Range - Gas
Tappan
30-3860-00-03
Range - Gas
Tappan
30-3860-00-04
Range - Gas
Tappan
30-3860-23-01
Range - Gas
Tappan
30-3860-23-02
Range - Gas
Tappan
30-3860-23-03
Range - Gas
Tappan
30-3860-23-04
Range - Gas
Frigidaire
30-3989
Range - GAS RANGE
Tappan
30-3989-00-01
Range - Gas
Tappan
30-3989-00-02
Range - Gas
Tappan
30-3989-00-03
Range - Gas
Tappan
30-3989-00-04
Range - Gas
Tappan
30-3989-00-05
Range - Gas
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service