The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is damaged, you should consider replacing it. This product is made of gray plastic and is approximately 21 inches in length. This tine row contains 11 straight tines and 1 curved tine. This product is sold individually. Many of our customers have rated this repair as very easy. To complete this repair, simply remove the old tine row and replace it with the new one.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
Part# W10728160 replaces these:
AP5951430, 3368621, 3368622, 3368625, 3368627, 3368631, 3370543, 3370561, 3375124, 3380620, 8051250, 8051257, 8268775, 8268776, 8274963, 8519589, 8519648, 8519682, 9744552, W10056272
...
Show more, W10082907, WP8519589, WPW10082907 Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
35 Reviews
4.9
Filter By Rating:
5 Stars
31
4 Stars
4
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel V - 5 days ago
Verified Purchase
Good part - easy to install
Pricey but needed since lower rack did not include this tine rack.
★★★★★
★★★★★
Shirley K - October 22, 2023
Verified Purchase
just what I needed
I thought the I would have to replace my whole bottom rack of my dishwasher. Yeah to PartSelect the had just the part I needed to fix the problem without paying for a whole rack. Very fast service. Thank you.
★★★★★
★★★★★
Mike M - February 5, 2023
Verified Purchase
Quick delivery
Just what was needed and arrived quickly
★★★★★
★★★★★
Jeffrey S - January 12, 2023
Verified Purchase
Easy repair
Perfect fit!
★★★★★
★★★★★
Joni T - March 23, 2022
Verified Purchase
Quick and easy repair
The part arrived faster than I expected. Installation was well covered in picture guide.
★★★★★
★★★★★
Lesley L - February 24, 2022
Verified Purchase
Easy repair
The part fit perfectly
★★★★★
★★★★★
Thomas O - January 7, 2022
Verified Purchase
as new
exact part fit like old one and works as new
★★★★★
★★★★★
Andrew N - October 19, 2021
Verified Purchase
Correct parts, as expected
The parts were exactly right - perfect replacements. Prompt delivery. Thanks you!
★★★★★
★★★★★
Carol C - September 24, 2021
Verified Purchase
Easy repair— put new row of tines on bottom and top rack.
Only took a few minutes to repair. Saved me a lot of money from having to buy the whole rack. Very easy repair!!!
★★★★★
★★★★★
Michel F - September 23, 2021
Verified Purchase
Easy
The part fit right in. Very nice part.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Tine on rack was rusted and needed to be replaced.
Just replaced it in the notches that held the rusted tine.
Jeanne from FAYETTE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tines had rusted off.
Removed old tine rows and replaced with the new parts. No tools were needed. Each was replaced one at a time so the old ones could serve as a model for how the new ones were inserted and attached. Not much more complicated than changing a light bulb. Parts appear to be good original equipment quality but quite pricy for these very simple
... Read morepieces.
At first I thought I needed a new bottom rack for my dishwasher. Out of curiosity, I watched the installation video and realized that the Tine Row installed separately and that was the only part I needed. I am appreciative of being able to access that video and the money I saved. Installation took seconds to complete.
Cheryl von der from HUNTINGTN BCH, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Split tine row
Removed broken tin row. Replaced with new tine row. Tokk less than 1 minute.
Janet from MIDDLEBORO, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part in the lower rack had rusted out
There was no tools involved the part popped right into place. I received the part within two days from the date placed. It was great.
Janet from Hollister, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rusted racks
Repair went OK but there were no instructions at all. Just boxes full of parts. Otherwise,assembly went smoothly. The dishwasher works like new. ( I feel that the parts were way over priced)
The cap of a vertical tine in the dishwasher had come off, leaving an exposed, rusted and sharp top.
The old tine row came out easily and the new one was easy to pop into place. I was pleased that it was so easy to order a replacement part.
Joan from Rockville, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
16 of 36 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tine-row rusted and broke
quick and easy,tine-row just snapped right in! Took about 15 seconds!
Warren from Ballston Lake, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusted tines and leaky door seal
The old tines on the lower tray were easily removed by bending them in the middle and pulling the ends out of the holders. The replacement tines went in just as easily. The old door seal was pulled out by hand and the new seal was pressed in easily with just using fingers.
I was most impressed with the communication in regard
... Read mores to product backorder. They gave me an estimate of product availability and an option to change the order. Great customer service!
replacement old rusted racks and other broken parts
justed snaped the old bottom rack wheel off installed new that came with the rack .Same with the top and other parts. Your service was great, even with back ordered parts, and delivery was timely after you received backorder. Very Pleased and will use your service again. Thank You.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
September 21, 2021
My Kenmore dishwasher has tines that are all curved. The picture shows all but one tine straight. The curved tines fit the curve of the mounting brackets. Will straight tines fit?
For model number 66515899100
Hello John, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10057154. These Tines will fit the Mounting Brackets. We hope this helps!
How do I replace the old tine row with the new one?
For model number MDB8959SBW0
Hello Patricia, Thank you for the question. The tip of the tine just slips into the plastic retainer. You just need to unclip the old and split the new one in place. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Kay
July 26, 2019
Bottom rack has permanent tines rusted out. I cannot see how you would replace tines. Feel i need a complete new bottom rack. Can you quote me on this?
For model number KUDT03FTSS
Hello Kay, thank you for inquiring. You can remove the Tine Row to replace it on your model dishwasher. This Tine Row part number PS10057161 is the correct replacement for your model. The replacement Lower Rack with Wheels for your model is part number PS11748155. Good luck with your repair!
Was this helpful?
Thank you for voting!
Geoff
August 28, 2019
Does this kit come with the lower mounting brackets mine are broken
Hello Geoff, Thank you for the question. This is just the tine row as shown in the picture. If you are able to provide the model number to the unit, we will be happy to verify the correct part number. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Geana
January 15, 2020
The tines on the bottom shelf of my dishwasher are not long enough to keep the dirty plates standing up. The plates fall onto each other, chipping my dinnerware. I want to replace the tines but cannot fine the length of the replacement tines. Can you help?
For model number KDTE104ESS0
Hello and thank you for writing.
These tines are 3 1/2 inches tall and are approximately 21 inches in length. This tine row contains 11 straight tines and 1 curved tine. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Michael
February 21, 2019
Are the genuine kitchen aid parts
For model number KUDSO3FTSSO
Hello Michael, Thank you for the question. Yes, all the parts we sell are brand new OEM genuine manufactured parts.Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
