DeVilbiss, Porter Cable, Black and Decker, DeWALT.
Part# N286039 replaces these:
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
March 14, 2022
After looking a several of your video I have changed the Tube Seal and both gasket. The compressor builds pressure and shuts off at 150 psi. It then leaks though a pin hole in the Head is this pin hole part of the Head design did I reassemble the head wrong?
For model number c2006
Hello Carlos and thank you for contacting us. There should not be a pinhole in the head and if there is it requires replacement. If it is leaking from the sides where the gasket seals it off then it was installed wrong and would need to be redone with a new gasket again. Make sure both surfaces are clean and free of any debris. I hope this helps and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10049094
Manufacturer Part Number: N286039