Fuel Tank Sub-Assembly A200778

It was as simple as removing four (4) hex screws holding the gas tank to the tiller frame. Once the tank was removed, took a screwdriver to pry the fuel line from the old tank (being careful not to damage the rubber seals). Place fuel line (there is another short line attached to it), I call it a breather line.Once in, attach fuel tank to tiller frame. Prime and start. This is super easy.

TIP: When placing the lines in the new tank, ensure you have the small and the large line in the same position as it came off the old tank, as the small must marry up with the small line and the larger one with the larger one.