Murray Lawn Tractor Parts

Lawn Tractor Mandrel Assembly – Part Number: 587819701

Your Price

$72.30

Murray Lawn Tractor Mandrel Assembly

★★★★★

2 Reviews

PartSelect Number PS12087499

Manufacturer Part Number 587819701

Lawn Mower Ring Clip – Part Number: 812000029

Your Price

$6.55

Murray Lawn Tractor Lawn Mower Ring Clip

★★★★★

1 Review

PartSelect Number PS9143890

Manufacturer Part Number 812000029

The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.

Installation Instructions

Anthony from OLIVEHILL, TN

Wheel bushings were bad

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...

Cap Axle Black 1 50 x 1 00 – Part Number: 532104757

Your Price

$6.55

Murray Lawn Tractor Cap Axle Black 1 50 X 00

★★★★★

1 Review

PartSelect Number PS9007667

Manufacturer Part Number 532104757

This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.

Installation Instructions

Anthony from OLIVEHILL, TN

Wheel bushings were bad

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...

Lawn Mower High Lift Blade – Part Number: 532138971

Your Price

$26.35

Murray Lawn Tractor Lawn Mower High Lift Blade

★★★★★

2 Reviews

PartSelect Number PS9286056

Manufacturer Part Number 532138971

This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.

Installation Instructions

Trace from LISLE, IL

Needed to replace the bent blades on my riding mower.

- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest. Read more...

Pin-bow Tie Cotter – Part Number: 714-04040

Your Price

$6.40

Murray Lawn Tractor Pin-bow Tie Cotter

PartSelect Number PS9096195

Manufacturer Part Number 714-04040

Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a kit or assembly and is sold individually. It is silver, made of metal, and is used in a variety of models for various purposes. This part needs to be replaced when it is broken or damaged, or the threads have become stripped. Depending on their location, this part is known to wear with regular use. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

Fixes these symptoms

Auger will not turn
See more...

Your Price

$33.68

Murray Lawn Tractor Solenoid

PartSelect Number PS16372182

Manufacturer Part Number 582042802

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair. Check the diagrams of your model for the exact location and the correct installation of the new part.

Installation Instructions

Russell from MACON, GA

Dryer runs no heat

Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats. Read more...

Cable-engage W/sea – Part Number: 946-05124A

Your Price

$28.55

Murray Lawn Tractor Cable-engage W/sea

PartSelect Number PS11813377

Manufacturer Part Number 946-05124A

This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the replacement. This part is sold individually.

Fixes these symptoms

Deck blades will not turn
See more...

Lawn Mower Flangelock Hex Nut – Part Number: 532409149

Your Price

$6.55

Murray Lawn Tractor Lawn Mower Flangelock Hex Nut

PartSelect Number PS9022497

Manufacturer Part Number 532409149

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To replace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

Lawn Mower Ignition Switch – Part Number: 532193350

Your Price

$31.00

Murray Lawn Tractor Lawn Mower Ignition Switch

★★★★★

2 Reviews

PartSelect Number PS9020864

Manufacturer Part Number 532193350

This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery and the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Russell from MACON, GA

Dryer runs no heat

Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats. Read more...

Flange Top Lock Nut – Part Number: 596134801

Your Price

$6.55

Murray Lawn Tractor Flange Top Lock Nut

PartSelect Number PS16381821

Manufacturer Part Number 596134801

This high-quality item is an authentic OEM hardware that is designed for use with Craftsman riding lawn mowers and garden tractors. It is one of the locknuts that is utilized to secure the pulleys. A locknut is a nut that resists loosening under vibration and torque. Refer to the diagrams of your model for the exact location and the correct application of this part. One durable metal locknut is included. You will need a wrench to secure and remove it.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Popular Murray Lawn Tractor Parts

Murray Lawn Tractor Appliance Types

Related Murray Lawn Tractor Parts

Popular Murray Lawn Tractor Models

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Murray Lawn Tractor Parts

Find Your Part

Popular Murray Lawn Tractor Parts

Murray Lawn Tractor Appliance Types

Related Murray Lawn Tractor Parts

Popular Murray Lawn Tractor Models