Murray Lawn Tractor Bearings

Your Price

$6.15

Murray Lawn Tractor Lawn Mower Bearing

PartSelect Number PS9010748

Manufacturer Part Number 532003366

Your Price

$9.01

Murray Lawn Tractor Lawn Mower Washer Thrust

PartSelect Number PS9006893

Manufacturer Part Number 532006266

Your Price

$9.39

Murray Lawn Tractor Lawn Mower Ball Bearing

PartSelect Number PS8887153

Manufacturer Part Number 1705897SM

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lubricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

Your Price

$6.15

Murray Lawn Tractor Lawn Mower Flange Bearing

PartSelect Number PS9122043

Manufacturer Part Number 741-0660A

This OEM-manufactured flange bearing supports and enables the smooth rotation of parts in your lawn equipment, such as the blade assembly, axle assembly, or steering components. This bearing has an inner diameter of .76 inches, an outer diameter of .941 inches, and a width of 1 inch. It is made of plastic. A similar similar style flange bearing can be used at the bottom of the crank, but it would be made of metal. When the bearing is broken, you may notice signs of wear and abnormal squealing noises coming from your machine. If neglected, the parts the bearing is supporting can overheat and potentially seize up. To switch out a flange bearing, you need to take off any bolts, screws, or clips that are holding it in place. Using a hammer or a bearing puller tool, gently push the bearing out of its housing. Since this part is sold individually, remember to refer to your user manual to understand how many bearings your machine will need. It is strongly recommended that you replace all the bearings in one go, as they wear out at the same rate.

Your Price

$13.40

Murray Lawn Tractor Snow Blower Greased Bearing

PartSelect Number PS9270711

Manufacturer Part Number 2108202SM

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.