Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZVB36WB3WW > Instructions

ZVB36WB3WW General Electric Range Hood - Instructions

All installation instructions for ZVB36WB3WW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range hood repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the ZVB36WB3WW
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Controller board fried

  • Customer: Anthony from Stevensville, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Wrench set
  • 4 of 6 people found this instruction helpful
Disconnected power and removed electrical cover
Disconnected wires from old controller one a time and connected to new controller as to not mismatch wire connections. Left new controller hanging off wires.
Raised vent and held using wood blocks to expose gap to use 1/4 inch wrench to undo screws from the inside (poor design for replacing the controller - this was the bulk of my time.) if this didn't work, I would have had to disassemble more of the downdraft.
Installed new controller.
Removed chocks, enabled power and tested...after verified, re-installed electrical cover.
All Instructions for the ZVB36WB3WW
1-2 of 2