Models
>
ZBD6900V50II
ZBD6900V50II General Electric Dishwasher - Overview
Sections of the ZBD6900V50II
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Dishrack Rollers and Axles - Kit of 8
PartSelect #: PS11725221
Manufacturer #: WD35X21041
If you are having trouble rolling your dish rack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Replace the parts ...
$32.18
In Stock
BASKET ASM SILVERWARE
PartSelect #: PS12703061
Manufacturer #: WD28X24469
This basket is part of a silverware basket that has 3 sections. This is the middle section of the basket.
$33.80
In Stock
Detergent Dispenser with Rinse Cap
PartSelect #: PS958966
Manufacturer #: WD12X10163
This detergent dispenser assembly is attached to the inner door panel of a dishwasher. This part holds detergent and dishwasher rinse products in a covered container. If your dispenser will not open, ...
$84.00
In Stock
Water Inlet Valve
PartSelect #: PS3654179
Manufacturer #: WD15X10014
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
$43.82
In Stock
Tub Gasket
PartSelect #: PS958888
Manufacturer #: WD08X10032
This gasket lines the inside cabinet in the dishwasher.
$40.45
In Stock
Rinse Aid Cap
PartSelect #: PS958932
Manufacturer #: WD12X10122
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
$16.44
In Stock
Hinge Arm Link
PartSelect #: PS259336
Manufacturer #: WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$8.54
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
PartSelect #: PS258461
Manufacturer #: WD02X10067
Sold Individually.
$8.54
In Stock
Sump
PartSelect #: PS959014
Manufacturer #: WD18X10026
This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.
$37.62
In Stock
Complete Lower Service Rack Assembly
PartSelect #: PS12749241
Manufacturer #: WD28X25960
This dish rack is for dishwashers. Dish rack holds the dishes in place during the dish washing cycle.
$194.55
In Stock
ARM SPRAY UPPER Assembly
PartSelect #: PS3511316
Manufacturer #: WD22X10084
The upper spray arm helps distribute water from the top of the dishwasher tub.
$13.45
In Stock
Drain Tube Kit
PartSelect #: PS2339994
Manufacturer #: WD24X10045
This kit includes the drain hose with black rubber end fittings and a clamp.
$34.77
In Stock
Questions And Answers for ZBD6900V50II
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the ZBD6900V50II
[Viewing 9 of 9]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower wheel axles worn out
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!!
Parts Used:
-
Glen from Alpine, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
966 of 986 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Parts Used:
-
Michelle from Weddington, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
752 of 762 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack began rusting and wheels broke off.
Pull old rack out, slip new one in!
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.
Parts Used:
-
nathan from commerce, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
540 of 741 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!