YNED4755EW1 Maytag Parts & Repair Help | PartSelect
Models > YNED4755EW1
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(306)
PartSelect #:PS346995
Manufacturer #:341241
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The b...
$16.60
In Stock
Order within the next 9 hrs and your part ships today!
(168)
PartSelect #:PS334313
Manufacturer #:279838
The heating element (Flat Can Heating Element 5400W, Heating Element, Whirlpool Dryer Heating Element, Dryer Heating Element) provides heat to the dryer. It is metal and measures 1...
$62.03
On Order
(79)
PartSelect #:PS11741405
Manufacturer #:WP3387134
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The...
$26.87
In Stock
Order within the next 9 hrs and your part ships today!
(23)
PartSelect #:PS11742185
Manufacturer #:WP3977767
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermost...
$22.66
In Stock
Order within the next 9 hrs and your part ships today!
(131)
PartSelect #:PS11757278
Manufacturer #:WPW10717210
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This mo...
$54.29
In Stock
Order within the next 9 hrs and your part ships today!
(236)
PartSelect #:PS11731583
Manufacturer #:W10861225
This white OEM dryer door handle is used to open and close the dryer's door. Comprised of plastic and 6-by-2-inches in dimension, the handle is sold individually and attaches to th...
$33.45
In Stock
Order within the next 9 hrs and your part ships today!
(5)
PartSelect #:PS11755850
Manufacturer #:WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found b...
$11.63
In Stock
Order within the next 9 hrs and your part ships today!
(11)
PartSelect #:PS1609293
Manufacturer #:49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs...
$7.48
In Stock
Order within the next 9 hrs and your part ships today!
(3)
PartSelect #:PS334206
Manufacturer #:279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$8.66
In Stock
Order within the next 9 hrs and your part ships today!
(16)
PartSelect #:PS334304
Manufacturer #:279827
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
$150.84
In Stock
Order within the next 9 hrs and your part ships today!
Questions and Answers for YNED4755EW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer motor runs, but no heat

  • Customer: Gadi from Irvine, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 2128 of 2288 people found this instruction helpful
To reach the heating element you only need to open the back cover of the dryer (about 8 nut-head screws). Remember to disconnect the power.

To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.

You can check the heating element with an ohm-meter or v... read more

Dryer would run with no heat.

  • Customer: Remie from Mahopac, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 659 of 680 people found this instruction helpful
The repair was easy. the most time consuming part was vacuuming the dust from the back of the Dryer, The repair required removing screw from the back panel of the dryer. Then removing screws from the heating element and unplugging the wires. The only moderately diffculy part was swapping the sensor form the old element. read more

No heat for dryer

  • Customer: Leslie from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 468 of 482 people found this instruction helpful
Moved dryer from wall,disconnected power. Unscrewed the 12+ sheet metal screws holding on the back cover. Located heating element, remover it's two sheet metal screws and pulled down on the element to remove. Disconnected the two electrical leads from element and went to the top of Dryer. Do not remiember if told to remove the tempture kill button was ea... read more