Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YKHMS2050SB1 > Instructions

YKHMS2050SB1 KitchenAid Microwave - Instructions

All installation instructions for YKHMS2050SB1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the YKHMS2050SB1
1-15 of 37
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Glass cooking tray broke

  • Customer: Mark from Agua Dulce, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 30 of 45 people found this instruction helpful
There was no "fixing" per say but we still could not use the microwave without the plate. This has to be one of the biggest plates for a microwave. We ordered this through your company and we had it three days later. THREE DAYS! We had expected anywhere from 1-2 weeks. My husband was so impressed he bookmarked your site for future reference. Thank you for being so efficient and prompt. The glass turntable fit like a glove! Sincerely, Mark and Lia Hammond

Fire in microwave melted several parts

  • Customer: duane from san diego, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 34 of 73 people found this instruction helpful
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave.

Surface lights and filters needed replacement

  • Customer: Papkin from Glendale, CA
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 5 of 6 people found this instruction helpful
By pulling the filter screens units down and out with a pair of pliers I had access to the surface lights. Pulled the lights out of their sockets and replaced the bulbs. Real easy. Since the filter units were out, replaced the filters and reinstalled the filter units. The whole operation took less than 15 minutes.

sparks when turned on

  • Customer: getachew from aldie, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 43 people found this instruction helpful
replace one of the four rack supports which was melting

Turntable driver broke/glass turntable broken

  • Customer: Kathleen from FT MYERS BCH, FL
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
Dropped in the driver. Lined up the glass turntable to the driver. Good to go.

COVER BURNED

  • Customer: Aaron from HIGH POINT, NC
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
REMOVED OLD AND REPLACED WITH NEW

my pan that browns the meat started to bubble and peal

  • Customer: Lillian from SAN JOSE, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I really did not have a repair on the microwave just a replacement of the browning pan

lost the driver

  • Customer: Luiz from Washington, DC
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
just insert it in the right side

Lost spring that holds filter in hood that was lost when cleaning it.

  • Customer: Raymond from Mechanicsville, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
simply removed the filter casing from the microwave, then removed both filters and inserted the spring after bending it slightly.

Broken microwave door handle

  • Customer: jody from HENDERSONVLLE, NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 4 people found this instruction helpful
Oprnef the door frame and took off old handle

The door of my whirlpool microwave broke off

  • Customer: Pete from Kensington, MD
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 19 people found this instruction helpful
I purchased the door handle to model KHMS1850SWH0 for around $50; the model I have,KHMS1850SWH1, only offers the entire door as a replacement for over $200. The earlier model door handle fit great with no problems.

light bulbs nedd to repace it.

  • Customer: Jorge from Bay Point, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 43 of 192 people found this instruction helpful
Took the the want burned out , and put the new ones.

Light Burned Out

  • Customer: Patti from Coarsegold, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the instruction booklet that came with the microwave. Very easy.

it was working fine and it stopped order a fuse and it wasn't the problem

  • Customer: Herb from Auburn, IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse

Dirty filters

  • Customer: Anna from Antioch, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the dirty ones and put in the new ones. This was really not a repair. No tools needed.
All Instructions for the YKHMS2050SB1
1-15 of 37