Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WWSS2601KW0 > Instructions

WWSS2601KW0 Crosley Refrigerator - Instructions

All installation instructions for WWSS2601KW0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WWSS2601KW0
646-660 of 945
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Compressor running constantly with freezer temperature at -20 degrees fahrenheit.

  • Customer: Steven from Raymond, NH
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Since the evaporator was all iced up, I decided to replace the least costliest item (defrost thermostat kit); did not resolve the problem. Once I replaced the freezer temperature control thermostat, the freezer temperature stabilized right at 0 degrees fahrenheit with dial on factory setting. Compressor no longer running constantly.

Leaking water filter cup

  • Customer: Bobby from Mckinney, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Initially I changed the filter, but in so doing, I misplaced the o ring located in the filter cup; without that o ring water leaks out every time it cycles. I purchased the o ring online (five dollars plus eight dollars to ship) and bingo no more leaks.

Plastic bearing broke on refrig door

  • Customer: William from Ashland, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
The part number was easy to find on the diagram. Delivery was as promised. Instructional film was very helpful and reassuring. Only problem was that the broken part left in the door was difficult to remove as it was distorted and would not slide out. Took considerable persuasion by screwdriver and pliers to remove remaining portion. New part went right in and reassembly was easy. Door works fine now.

ice maker inlet leaking

  • Customer: kevin from east haven, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
removed backing to refrig unscrewed 2 screws from bracket pulled unit out unhooked hoses and elec plug's / putting in new just reversed the instalation

crisper shelf support broken

  • Customer: James R from East Stroudsburg, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Remove crisper and shelf. Use a small punch and hammer to gently push the tightening pin through to the wall of refrigerator, keep in mind you'll need to remove this piece with small needle nose pliers before installing new part. Set new part in place and lightly tap the pin in until flush. Install crisper and enjoy the rest of your day.

Broken cover support

  • Customer: John from Frederick, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Remove cover, puch old pin into hole. Remove old support. Set new support in & drive pin in flush. Replace cover.

Leaking water

  • Customer: Omar from Vestal, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My part had threaded fittings. The part that I received had snap fittings. Once I realized that that snap fittings worked with the bare tubing and not any special tip endings, I simply cut off the ends of my tubing that mated with the threaded fittings. I then had bare tubing that snapped into the snap fittings. Two minutes later, the part was in place and the job was done. Problem solved.

Broken Door Closing Cam

  • Customer: Allan from Moon Township, PA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Instructions made the job very easy. Parts were an exact replacement. Thank you

light socket overheated and crumbled

  • Customer: Wayne from Summerville, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
remove and replace socket. adjust light switch so that it turns light off when door closes.

Water Tube That Fills Ice Maker Leaking Water

  • Customer: PAT from BATON ROUGE, LA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Undone the water line that comes up the back of the refrigerator and pulled the water tube out the back of the refrigerator and reinstalled the new one and reinstalled the water line. Done

Crisper cover and front support clips were broken

  • Customer: Lafayette from Winnsboro, SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed broken cover frame and drawer.: saved unbroken glass .With putty knife removed two front broken support clips.Inserted new support clips installed new ,cover frame installed drawer replaced glass cover and turned refer over to wife.

Broken bottom shelf on refrigator side

  • Customer: Narcy from Victorville, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I was really surprised to received the part so fast. Removed it from the well packed shipping box and installed it in place of the broken missing shelf. It took me about less than 15 minutes to replace it.

Broken Water Dispenser Arm

  • Customer: Megan from Alexandria, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
This was surprisingly easy to replace. Just a screwdriver (and a magnet to pick up the screw I kept dropping) and a little patience. The video was extremely helpful and walks you though step by step.

Lower door hinge broke last year

  • Customer: Richard from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Exactly as the YouTube video described - really simple.

freezer wouldnt defrost

  • Customer: Jerry from Fieldale, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Cut the 2 wires going to thermostat and connecting the new. Then connect the thermostat to same place I unhookef the old one.
All Instructions for the WWSS2601KW0
646-660 of 945