Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WWSS2601KW0 > Instructions

WWSS2601KW0 Crosley Refrigerator - Instructions

All installation instructions for WWSS2601KW0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WWSS2601KW0
511-525 of 945
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer Upper Door Bin Broke

  • Customer: Juana from Fresno, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered a freezer upper door bin and received the wrong part. I contacted PartsSelect immediately and they re-shipped the correct part. It was well packaged, I removed the part and paper towel wiped it down and snapped it into the freezer door bin. I highly recommend PartsSelect for their great products and Customer Service. I even add them to my contact numbers in my cell phone, they will be the first I call, when needing a part for any appliance!

housing had cracked and was leaking water

  • Customer: Max from Olmsted Falls, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
watched video online at part select the repair was very easy unscrew a couple screws disconnect water lines reconnect water lines to new housing and re-screw everything back.

The partition between the doors of the refridgerator was hot and the fan that cools the condensor and the coils was not working.

  • Customer: Jim from Simi Valley, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.

Missing snaps and bar on fridge door

  • Customer: Sharon from Destin, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I was unsure how I was going to be able to make this repair. However, it was so easy I have planned to order other items to make the repairs myself. I am a rental manager at a condominium complex and I think my homeowners will be very happy when they see how much money we can save them by our office doing the repairs.

No ice was being dispensed

  • Customer: Bette from Morris, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I removed the cover on the door to access the levers that dispensed the water and ice. I was able to pull the assembly out far enough to remove the damaged part and install the new one. It was fairly easy because i have small hands and did not need to pull the assembly out too far. Otherwise it went fairly smooth and was done in no time. The fact that I am a woman had no bearing other than the small hands part. My husband could not have changed the part for that reason. The ease in changing the part saved us quite a bit of money by not having to call a repairman. the only authorized repairman is about 40 miles away and with mileage plus installation it would have cost a fortune and being on a fixed income ease of part installation is great for us older people. thanks for great product.

cracked

  • Customer: henry from columbus, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
replaced

kids used fridge door drawers as stairs and broke them!!!

  • Customer: Chelsea from Plainfield, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced all broken pieces quickly for very cheap! Website very easy to use!!!

Door making noise and not closing automatically

  • Customer: Rick from Cerritos, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Followed video instruction provided on this site.

When you opened the refrigerator door, it made a big thump....

  • Customer: Ellen from Springfield, LA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....

broken shelf

  • Customer: James from Warren, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Out of the box and slipped right in on the door. Part was here in 3 days. Excellent service.

broken refrigerator door bin

  • Customer: diane from birdsboro, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
It really was a replacement rather than a repair, but I think it worth my while to relay how easy it was to find and order the new bin from Part Select. I was pleased with everything from finding the correct part easily to the shipping and payment. Thank you for such a vauable source to tap from any time I need a part. I am very happy to recommend this service to anyone who may need it.

Bottom refrigerator door shelf broke

  • Customer: Thomas from Sunrise, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My clumsy daughter used the shelf as a stepping stool and broke it right off. The new shelf was literally a snap to install. I only had to snap it in place. The new part came the next day after I ordered it, I was amazed. I was expecting it to come to my door about 3 days later. It was super fast.

Broken bottom door bins

  • Customer: Lisa from Belton, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Our parts arrived very quickly and fit perfectly!

Door Bin and Bottom Door Bins broke

  • Customer: Kendra from Grandview, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The repairs were easy. Parts came quickly after they were ordered. They easily fit into the slot for the door bins.

Broken crisper cover support

  • Customer: Thomas from Las Vegas, NV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Received the parts promptly and did the repair just as the video showed. All went well and had the repair completed in 10 minutes. For me that was remarkable because I have two left hands! Would highly recommend partselect.com
All Instructions for the WWSS2601KW0
511-525 of 945