Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WWEF3002KWB > Instructions

WWEF3002KWB Westinghouse Range - Instructions

All installation instructions for WWEF3002KWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WWEF3002KWB
586-600 of 892
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not heating

  • Customer: Steve from lake Hiawatha, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Removed oven from wall, disconnect power source, loosen nuts from element, pull element out, disconnect wires, hook up wires to new element, put back nuts.Plug in and it worked great.

Bake element burnt out

  • Customer: Elizabeth from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Disconnected power; unscrewed element from oven wall; pulled element off of contacts. Pushed new element onto contacts; screwed to oven wall

Bake element caught fire and stopped working

  • Customer: Megan from Savannah, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
After in I found my oven glowing from the small fire inside, I thought I was in for an expensive repair or complete replacement. Part select helped me find the exact part I needed and the video showed me just how easy it would be. $40 and 15 min later my oven was fixed and I was baking again! The repair consisted of removing two screws and simply removing and plugging in the new bake element. Thanks for the help!!

oven element not working

  • Customer: Patricia from Hendersonville, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old element and just popped in the new one

Heating element , not heating

  • Customer: Joseph from Littleton, NH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
1. Made sure replacement part matched the defective part. 2. Got the recommended tools. 3. Pulled out range away from wall. Unplugged range. 4. Opened oven door and removed two screws ( with nut driver ) that hold heating element and detached the two wires from the element with pliers. Threw away old element and than connected the two wires ( one to each end of the new heating element ) . Than I use the nut driver to secure the new element with the two screws I removed earlier. Plugged range back in and pushed it back against the wall. Than turned on oven and the oven heated very well. Less than 15 minutes to complete the task.

Bake element needed replacement

  • Customer: Paula from Cazenovia, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Piece of cake mostly because the video was very helpful clear and thorough

Oven bake element burned out

  • Customer: Charles from Saint Augustine, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Replaced element

The lower oven heat element went out

  • Customer: Jim from Webster, WI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I went on line and looked up our Model no and serial number of our Frigidaire Range, on Part Select's website, found the part and ordered. Within 3 days the part arrived, and to work on the lower heat element, the two oven racks are removed then I used a small socket set to take the connecting screws out, pull the bake element out of the socket, remove the power cords, then reverse the process install the power cords(just easy slip on) and then reattach the screw, tighten, and put the two over racks back in their place. Turn the oven on and the oven worked beautifully.

front left burner was on HI no matter what the dail setting was

  • Customer: Eric from Mosier, OR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
pull back panel, 2 screws & one wire at a time.....And don't forget to KILL POWER!!!!super easy works great now and the wife loves it.

my bake element was sparking it was cracked

  • Customer: JAMIE from SAVANNAH, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
used fill up screw driver removed bake element, detaching it from power wires on both ends replaced it with new bake element screwed back in and was done in 5 minutes.

The Bake Element burned out and broke

  • Customer: Deneice from Guilford, MO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First I unplugged the stove. I used a nut driver to remove the element from the back of the oven. The ends of the element were attached to wires. I pulled the ends of the element out of the wire ends, being careful to hold on to the wires to protect them from breaking. I pushed the wire ends onto the new element, fed the wires back into the back of the oven, put the screws back in and it was done! The repair was very simple. The hard part was cleaning under the stove and the sides of the stove!! :) When I pulled it out to unplug it I found that my children love to sweep things underneath it!! Oh well now I have a working oven AND a clean stove!

element burned out

  • Customer: james from oscoda, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
watched the video online that was provided. made the job very easy. anyone could do it. works great. thanks.

old oven racks were nasty!

  • Customer: Richard from Fort Wayne, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.

element burnt out

  • Customer: Edward from Inverness, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
two screws and plugged back in works great

drawer glides broken

  • Customer: robert from toms river, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
poped out the old ones and new ones slide right in.
All Instructions for the WWEF3002KWB
586-600 of 892