Models > WT5070CW

WT5070CW ((ABWESED)) LG Washer - Overview

Sections of the WT5070CW

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SENSOR ASSEMBLY – Part Number: 6501KW2002B
SENSOR ASSEMBLY
★★★★★
★★★★★
(20)
PartSelect #: PS16556422
Manufacturer #: 6501KW2002B
This is a replacement sensor assembly for your washer. It may also be known as a motor rotor position sensor. The sensor assembly monitors the direction and speed of the spinning rotor and communicate...
$41.80
  In Stock
PULSATOR ASSEMBLY – Part Number: AGZ72909711
PULSATOR ASSEMBLY
★★★★★
★★★★★
(22)
PartSelect #: PS12588963
Manufacturer #: AGZ72909711
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. Th...
$179.52
  In Stock
Washer Water Inlet Valve – Part Number: AJU75152601
Washer Water Inlet Valve
★★★★★
★★★★★
(41)
PartSelect #: PS12374721
Manufacturer #: AJU75152601
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stop...
$126.47
  In Stock
Pulsator Cap – Part Number: 5006EA3009B
Pulsator Cap
★★★★★
★★★★★
(11)
PartSelect #: PS3525704
Manufacturer #: 5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a w...
$30.07
  In Stock
Washer Drain Pump Assembly – Part Number: 5859EA1004P
Washer Drain Pump Assembly
★★★★★
★★★★★
(9)
PartSelect #: PS11706439
Manufacturer #: 5859EA1004P
This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
$198.07
  In Stock
Tub-to-Pump Hose – Part Number: AEM73213001
Tub-to-Pump Hose
★★★★★
★★★★★
(14)
PartSelect #: PS3617213
Manufacturer #: AEM73213001
This is a drain hose assembly for top-load models of LG washing machines. This hose specifically is used to allow water to drain from the tub to the drain pump of the washer. This hose is made of plas...
$32.23
  In Stock
Clutch Housing Assembly with Mode Shifter – Part Number: AEN73131406
Clutch Housing Assembly with Mode Shifter
★★★★★
★★★★★
(14)
PartSelect #: PS11708484
Manufacturer #: AEN73131406
This clutch housing assembly with mode shifter, or washer drive shaft and shifter assembly, is made for your washer. It connects the appliance wash plate to the motor so the washer can shift the drive...
$260.14
  On Order
Screw,Customized – Part Number: FAB30598601
Screw,Customized
PartSelect #: PS3534421
Manufacturer #: FAB30598601
$17.63
  In Stock
Clamp – Part Number: 4861FR3068A
Clamp
PartSelect #: PS3524032
Manufacturer #: 4861FR3068A
$9.90
  In Stock
HOSE ASSEMBLY,DRAIN – Part Number: AEM73732901
HOSE ASSEMBLY,DRAIN
★★★★★
★★★★★
(6)
PartSelect #: PS8749199
Manufacturer #: AEM73732901
This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pum...
$36.17
  In Stock
Switch Assembly,Sensor – Part Number: 6501EA1001R
Switch Assembly,Sensor
★★★★★
★★★★★
(4)
PartSelect #: PS3529177
Manufacturer #: 6501EA1001R
This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It...
$49.36
  In Stock
Cap,Softener – Part Number: MBL62061501
Cap,Softener
★★★★★
★★★★★
(2)
PartSelect #: PS3534726
Manufacturer #: MBL62061501
This part is the replacement fabric softener cap for your washer. It is also known as the washer dispenser drawer insert. It is made of blue plastic and is approximately 4 1/4 inches by 2 1/4 inches. ...
$21.39
  In Stock

Questions And Answers for WT5070CW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pattie
December 15, 2023
LG Washer constantly fill up with water & leaking water
For model number WT5070CW
PartSelect logo
Hi Pattie, thank you for contacting us. We found that the issue is with the water inlet valve, part number PS12374721. The water inlet valve controls the water flow into the washer. We would recommend checking the inlet valve to fix the issue. Good luck with your repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the WT5070CW

[Viewing 9 of 9]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
LE Error Message and won't spin drum properly
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was the likely cause of the failure. I replaced that and everything works great now. And now I have a spare main board in case that ever fails. I also want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener caused a lot of mildew to form inside the dispenser directly above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to keep the mildew from forming.
Parts Used:
SENSOR ASSEMBLY
  • Mark from Harrisburg, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
236 of 308 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LE fail code
Removed back of washer with screw driver, Removed outer motor cover with a 17 mm socket (1 bolt), Removed motor stater using 10 mm socket (8 bolts). Left motor plugged in and and tipped to the side exposing the sensor. Unplug and snap off sensor. Reassembled in opposite order. Machine works great. Very easy fix, and perfect fit on part.
Parts Used:
SENSOR ASSEMBLY
  • scott from GODDARD, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
25 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
"Le" Fail Code on digital display ... Washer would not agitate and made an odd noise.
I first thought there was a mechanical problem but after checking everything mechanical I discounted that idea ... I researched and found out from others with a similar problem that the Le code display was probably a sensor problem ... I ordered a replacement sensor ... With the new sensor available, I removed the access panel to the back of the machine (phillips head screw driver - 4 screws) ... Remove the exposed motor half (1 bolt - 17mm scocket) ... Loosen the motor stator that has the wired coils (10mm socket - 6 bolts) ... Hold motor unit to the side without disconnecting the wiring harness ... Disconnect the sensor wire connector and remove the old sensor ... Clip the new sensor in place (same position as the old one) and re-connect ... Reverse the assembly procedures ... This fixed the problem and the washing machine works like a new one ... The wife is HAPPY!
Parts Used:
SENSOR ASSEMBLY
  • Ronny from GASTONIA, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
19 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!