WRT21S4AW3 Westinghouse Refrigerator - Instructions

simply backed out 2 screws on each of the handles, then by observing the key ways in the new handles, i realized all i had to do was push down on the old handles to release them. then it was a snap to slip the new handles in and secure them with the original screws. SO EASY!

I check why not defrost, y test element and tha problem is defrost timer, i ordered and change, that is it. Your intructions that is very nice.Thanks Ben

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.

The instructions given to me by part Select were very good.I replaced the Timer- checked the heater with oham meter it was good- checked the door weather striping it was good and replaced the thermostat with new .So at this point I may need to call a professional unless some one has another solution.

I did not believe the other posts about how easy this was because that is not at all how any project goes for me. I was wrong. The original gasket slid out of the lip around the door and the new one went back on in less than 5 minutes. It has made a HUGE difference in the performance of the fridge. It did take 2 or 3 days for the gasket to fully conform to the fridge itself, but there was still a good seal during that time.

Snapped retainers into place with no tools. Took less than a minute.

Received the shelf viva delivery opened package took glass out put in fridge

It was sooo easy to replace new part. Just popped out broken shelf bar and snapped in new one. I am so glad i found PartSelect Thank-you

first I replaced the timer control hoping thats the problem,unfortunately situation the same ice build up on the freezer.so I replaced the defrost thermostat.right now I'll still observing the condition if still the same.may be in couple days.so far its good.and to replace the parts is not difficult and easy.

took old half off - 2 seconds - put new part in - 10 seconds - DONE!Took longer to get it out of the box than it did to install. Really SIMPLE! Thanks Parts Select!

I removed the crisper bins and then removed the shelf. I discarded the broken plastic piece and inserted the glass shelf into the new plastic piece and then put the shelf back in the fridge. Not counting the time it took to clear the food from the shelf and wipe down the glass, the whole process took about two minutes and required no tools. I was the easiest repair of anything I've ever done.

Very simple. Remove the old one, 3 screws, install the new one, same 3 screws. Took longer to find and order part than install it.

very easy. took the door off and new strip went on very easily.

I literally just watched the video while I was repairing it at home. This is coming from a very girly girl who was desperate because she did not want to spend money on a new fridge while risking everything to fix it. If I can fix it...anybody can do it! I didn't even use the fancy melting machine, I used regular old wire tape and it is as good as new!