Models > WRT21S4AQ1 > Instructions

WRT21S4AQ1 Westinghouse Refrigerator - Instructions

All Instructions for the WRT21S4AQ1
331 - 345 of 353
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer was cold bit the refrigerator was warm.
Based on the diagnosis on this site I thought the 66% odds of the problem being the Defrost Timer looked pretty good, $30 including shipping versus a Sears tech phone estimate of $250-300. BINGO! Just follow the online installation instructions and don't forget to use the reset switch as described. Works like new! THANK YOU
Parts Used:
Defrost Timer - 60Hz 120V
  • Christopher from Wilmington, DE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bottom shelf with glass broken/missing
Pulled out the broken shelf, glass was already missing. Inserted new shelf, placed glass piece on top, and inserted vegetable bins. Job done.
Parts Used:
Refrigerator Crisper Pan Cover Pan Cover Glass Insert
  • Jessica from Savannah, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Refrigerator section warm
My husband watched the video on your website and found it very easy to do the repair. The repair company that diagnosed the problem wanted $210 to do it. The part I ordered was under $20, and after he installed it the refrigerator has been working great. We would highly recommend your site to anyone who needs to fix anything!
Parts Used:
Defrost Thermostat
  • Laurie from Meridian, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken pan cover glass
Part arrived...took it out of the package....put it right in the fridge. Perfect fit.....thank you so much.
Parts Used:
Pan Cover Glass Insert
  • Kathryn from BUCKEYE, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
fridge not blowing cold
bottom left cornerof fridge defrost timer replaced two bolts and a wire
Parts Used:
Defrost Timer - 60Hz 120V
  • wayne from marietta, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken end caps and bent retainer bar
Took old off, put caps on new bar, put bars on.
Parts Used:
Refrigerator Door Shelf Retainer Bar - Cut to Fit Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Robert from Dania Beach, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door shelf retainer bar was about 1" too long.
I needed to cut the bar to fit or return it for the bar that was almost three times the price. The notches to hold the end cap are no longer on that side so I also needed to clamp the metal bar to the end cap.
Parts Used:
Refrigerator Door Shelf Retainer Bar - Cut to Fit Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Shannon from Lake Grove, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
The gasket was torn and missing some chunks in some areas.
I did not believe the other posts about how easy this was because that is not at all how any project goes for me. I was wrong. The original gasket slid out of the lip around the door and the new one went back on in less than 5 minutes. It has made a HUGE difference in the performance of the fridge. It did take 2 or 3 days for the gasket to fully conform to the fridge itself, but there was still a good seal during that time.
Parts Used:
Refrigerator Door Gasket
  • Jessica from Canton, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken bracket
The part came quickly and was an easy installation.
Parts Used:
5A - Door Shelf Retainer Bar End Cap - Right Side
  • Jerome from West Hartford, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Plastic retainer bar broke
Put the new one on and snapped back in place, it was really easy and I was so thrilled at how easy it was to find the part.
Parts Used:
6A- Door Shelf Retainer Bar End Cap - Left Side
  • Michelle from Punxsutawney, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
plastic retainer bar broke
Took old retainer bar off and put new one on.
Parts Used:
Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Michelle from Punxsutawney, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Shattered crisper cover
Received the shelf viva delivery opened package took glass out put in fridge
Parts Used:
Pan Cover Glass Insert
  • Ann from Metairie, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
ice buil up on freezer,not defrosting
first I replaced the timer control hoping thats the problem,unfortunately situation the same ice build up on the freezer.so I replaced the defrost thermostat.right now I'll still observing the condition if still the same.may be in couple days.so far its good.and to replace the parts is not difficult and easy.
Parts Used:
Defrost Timer - 60Hz 120V
  • Ed from Glendale, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The original brackets were cracked, this was caused by my father's wheel chair and walker.
The parts were a snap to put on and the refrigerator is back to like new. Thank you for quickly sending the replacement parts.
Parts Used:
5A - Door Shelf Retainer Bar End Cap - Right Side 6A- Door Shelf Retainer Bar End Cap - Left Side Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Sera from Plainfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
broken crisper pan (plastic part; the glass was OK.
I removed the crisper bins and then removed the shelf. I discarded the broken plastic piece and inserted the glass shelf into the new plastic piece and then put the shelf back in the fridge. Not counting the time it took to clear the food from the shelf and wipe down the glass, the whole process took about two minutes and required no tools. I was the easiest repair of anything I've ever done.
Parts Used:
Refrigerator Crisper Pan Cover
  • Donald from Sunbury, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRT21S4AQ1
331 - 345 of 353