WRT1G3EW0 Westinghouse Refrigerator - Instructions

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

removed old rail installed new rail

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.

The instructions given to me by part Select were very good.I replaced the Timer- checked the heater with oham meter it was good- checked the door weather striping it was good and replaced the thermostat with new .So at this point I may need to call a professional unless some one has another solution.

If you're reading this, just buy the shelf and put it in. You have already learned the real lesson: The crisper shelf is more delicate than you thought.

they just snap in

I just unscrew the broken support rail and replace it with the new one. I didn't need the left side rail but also replace it. It was very easy to do it. The new parts I order came on time, no problem at all. Thanks for you reliable internet services. E. Lopez

Ordered the new part-Unplugged the refrigerator - took off the cover over the defective timer - put in the new part put the cover back on - plugged the refrigerator back in - so far, so good!~

Used Philips head screwdriver to remove screw at rear edge of drawer rail, slide new rail on, drove screw back into rail- took longer to move food off and back on shelf than to do repair

jump thermostat,fan and compressor came on, ordered thermo from this excllent parts supplier, part came in 4 days later, it was exact replacement, works exactly right!

just put the new one in place

Just followed the online instruction video .It was very easy.

The shelf arms fit perfectly --I just popped them into place.

removed top shelf from refrigerator,put new rail in slots and tightened screw.Replaced shelf and slid in drawer.

I did it just like the video it was that easy! love this web site amazing!