WRS6R3EW2 Westinghouse Refrigerator - Instructions

It was a breeze. Very easy to do took longer to tale part out if box than to make repair. I love part select.

Bought the new one and stuck it back in the door. Easy

the new ones clipped in very easily. it took 2 minutes and the shipping from this company was really fast. I ordered on Christmas Day and had the stuff 2 days later. this is, from my experience, a good company.

I pull out the broken part by push the center pin thru and then rerome all the parts. I then positioned the new part in place and push in the center pin to lock. quick and easy.

I couldn't find the part I needed online, so I called. The person I talked to was great--and found the exact part I was looking for. It was here in no time & I took it out of the box & popped it in the door of the refrigerator. It was so easy!

Removed top hinge. Lifted door off bottom hinge. tilted door to remove damaged part. Slid in new bearing-hinge. Re-mounted door on bottom hinge. Reinstalled top hinge. Done!

1) Removed the items from the door.
2) Removed the screw from the top hinge cover.
3) Removed the 2 bolts from the top hinge plate.
4) Lifted the door off the bottom hinge.
5) Removed the broken pieces from the bottom of the door and the lower hinge plate.
6) Slid the new hinge in the hole on the bottom of the door.
7) Greased the area of friction where the hinge rotates.
8) Lifted the door and guided it on the lower hinge post.
9) Greased the top roataing pin.
10) Installed the remainder pieces in reverse.

It was easy. I just pop the shelf into the slots

No big deal, just easy service and next day delivery at the 3-5 day price

Replaced the drawer cover/shelf. Took the door off & put in the new plate....simple.

Was the fastest repair I ever did in my life. I intially received the wrong part, but after 1 email I received the correct part the next day! Exchange was easy and with no hassles.

Replaced broken door shelf bin with new one.

With a screwdriver, remove the hinge cover-plate on the top of the door. This reveals the two nut-driven screws that hold th top hinge-plate: remove while children/wife/neighbor/butler/out-of-work-political consultant hold the door. Take out the screw on the Bearing plate and replace with new. (I replaced, but kept the old one. Like to replace parts that ride on each other in pairs, even if there is no noticable wear. Next, take the old Bearing-hinge from the bottom of the door that whomever is holding. Needle-Nose Pliers might be handy if your bearing-hinge is also shredded. Re-assemble being careful to place the bottom hinge into the Bearing without catching or scoring the Bearing hinge. Don't want to do this again in six monthes.
While I was under there with the base/bottom plate removed, I noticed the dust and crud and vaccumed after replacing the door.

I removed the old shelf and replaced with new one.
No tools needed.

This would have been an easy repair, but I bought the Frig from Lowes and I think they added the icemaker. The replacement icemaker uint has a plug on it for easy replacement. My frig was hard wired so I had to cut off the plug and splice the wires. Not a real big deal but a small work space.