WRS23MW3AWK Crosley Refrigerator - Instructions

Replacing the tray was easy once I received the correct tray. It seems the part number on the tray had been changed over the years since I had purchased the refrigerator. By ordering the part from just the catalog, I had no idea I was ordering the wrong part. When I received the part, I called and the representative who I spoke with told me of the problem and with the serial number the correct part was ordered...good Customer Service.

It was a piece of cake took mins Thanks ps for those who are not mechanical they even have videos to show you how to make the repair

I watched the do it yourself video which helped tremendously. My husband was busy so I was able to do it myself.

My brother-in-law was the real hero here, he's quite the handy man. Once we realized that the loud noise and lack of cooling was the failed motor in the air damper unit we ordered the replacement after taking the entire unit and arm out of the fridge. Removing the entire damper unit was the only hard part due to the adhesive to the plastic mounting and Styrofoam insulation. Once out, we put the replacement in, reconnected the power switches and reseated the entire control unit arm into the fridge. The noise was gone and after a day the temperature in the fridge was back to 39 degrees Farenheit.

Easily done. Great fit.

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.

I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.

Just took old knob out put new knob in real easy thank you jd

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

I followed the video instructions from your site and it couldn't have been easier.

After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!

No installation really required. This was the greatest experience I have ever had purchasing any product. I broke the shelf cleaning the refrigerator, ordered the part on-line and received it in less then 24 hours of breaking the original. Am slightly disappointed that the shelf was plain and not like the original with the white dots, but definitely very pleased with the timely replacement service!

Unplugged frig. removed old switch with the aid of screw driver. removed wires and taped; plugged frig. back in and waited for new one. new one came, unplugged frig.removed tape from wire clips plugged in to switch and pushed switch into socket hole and plugged frig. back in; shut door, works like a new one.

When my side by side Kenmore refrigerator quit keeping the top half of my freezer and refrigerator cold I called Sears to see how much it would cost to get it checked out and fixed. Bottom line it was going to cost minimum $65 (which was just for him to come out) to $250 on up depending on what the problem was. So i decided to "do it myself"! I took it apart and within a few minutes figured out that it was my evaporator fan. So I went to sears to order the part based on the part number and with shipping and handling it was going to cost $125. While at sears I got on one of their computers and quickly looked up Kenmore parts and partselect.com came up and I quickly found the part for $62 and I chose overnight delivery and spent a total of like $83. When my part arrived I realized that the wiring/plug ins didn't quite match up. So I got online and went to their website and found a video for "do it yourself'ers" like me on how to splice the wiring to make it match. It took me about 20 min to splice the wire and put my refrigerator back together and IT WORKED! Easy easy easy and I saved moocho bucks! Ill never pay a repairman again. Oh and by the way, I am blond! :-)