Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WMH75520AS0 > Instructions

WMH75520AS0 Whirlpool Microwave - Instructions

All installation instructions for WMH75520AS0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WMH75520AS0
1-15 of 86
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken glass turntable

  • Customer: Deborah from Baltimore, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 388 of 392 people found this instruction helpful
No repair- just replaced glass turntable.
Right part I needed with first try

light bult needed to be replaced

  • Customer: Deborah from Millersville, MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 113 of 163 people found this instruction helpful
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb

Glass microwave turntable shattered while taken out for a cleaning.

  • Customer: STEPHEN from FORT MYERS, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 91 of 157 people found this instruction helpful
PartSelect had the turntable I needed at the best price. Ordering was easy, but best of all, the part was delivered next day. I was able to insert the new turntable plate into the microwave and it was good as new.

Bulb "burnt out"

  • Customer: Joseph from Pembroke, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 62 of 88 people found this instruction helpful
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.

Replacement turntable glass

  • Customer: Beverly from Hauppauge, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 78 of 140 people found this instruction helpful
Opened the box and popped it in. No problem with that.

I broke the glass plate to the microwave.

  • Customer: Rosalina from Madera, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 68 of 130 people found this instruction helpful
The part was sent to me the next day! And it was the right part. Awesome!

broken glass turntable

  • Customer: Joseph from Buena Vista, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 67 of 131 people found this instruction helpful
set the table on the support ring

Broken Microwave Tray

  • Customer: Eric from Puyallup, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 127 people found this instruction helpful
This is the second replacement tray we have in installed. The first one ( Not From Here ) we had for less than 5 months, we made a bag of popcorn, and about 5 minutes later we heard a crash, not knowing where the noise came from we dismissed it. The next day we opened the microwave a saw the plate had shattered. So we hope that this will not do the same thing.

burned out bulb

  • Customer: john from plainfield, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 27 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again.

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 18 of 23 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold the glass plate in position and left it at that.

The thing that makes the plate rotate was missing

  • Customer: Kim from MILTON, WV
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 13 people found this instruction helpful
I ordered the part according to the Model number, inserted the part very easily, (and I am soooo challenged in that area) and now it turns again. :)

Light bulb was out

  • Customer: Leslie from WILLINGBORO, NJ
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
It was a bit awkward because the microwave is mounted over my stove. I had to twist around and install the bulb and then replace the cover. It was a bit uncomfortable. It took me about 10 minutes to complete.

Replacing Charcoal Filters

  • Customer: Bud from GOODYEAR, AZ
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 10 people found this instruction helpful
Remove two screws from Vent Grille, one on either side, and remove one screw inside Vent Grille on right side. Pull Vent Grille off exposing the two Charcoal filters. Remove the two Charcoal filters by hand and replace with new ones. Reinstall the Vent Grille and tighten screws. That's it. I'm not handy (ask my wife) and if I can do it so can you.

Install grease filter

  • Customer: Ben from PENNSVILLE, NJ
  • Difficulty: Very Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
Followed instruction already on your website

blown dual element lightbulb

  • Customer: Glenn from BRISTOW, VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench set
  • 3 of 3 people found this instruction helpful
The hard part was trying to find the light bulb locally. The locally sold light bulbs were either too long, not dual element or not powerful enough. So I ordered the light bulb straight from PartSelect. When it came time to install the new light bulb I carefully removed the screw holding the plate in position so as not to loose it in my gas stove. I needed the mirror to line up the light bulb and screw it in. Once it was in I verified operation and closed up the plate being careful not to drop the screw into my gas stove. Problem solved.
All Instructions for the WMH75520AS0
1-15 of 86