Models > WM2233HW

WM2233HW ((00)) LG Washer - Overview

Sections of the WM2233HW

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Washing Machine Drain Pump and Motor Assembly – Part Number: 4681EA2001T
Washing Machine Drain Pump and Motor Assembly
★★★★★
★★★★★
(235)
PartSelect #: PS3579318
Manufacturer #: 4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
$55.81
  In Stock
Water Inlet Valve - Hot – Part Number: 5220FR2006H
Water Inlet Valve - Hot
★★★★★
★★★★★
(78)
PartSelect #: PS3527427
Manufacturer #: 5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow...
$23.24
  In Stock
Water Inlet Valve - Cold – Part Number: 5220FR2075L
Water Inlet Valve - Cold
★★★★★
★★★★★
(71)
PartSelect #: PS11728995
Manufacturer #: 5220FR2075L
The cold water inlet valve on your washing machine dispenses the cold water and bleach into the washer in the prewash cycle. This inlet valve has a standard hose fitting inlet and 2 water outlets faci...
$54.38
  In Stock
Rear Tub Gasket – Part Number: 4036ER2004A
Rear Tub Gasket
★★★★★
★★★★★
(15)
PartSelect #: PS3522855
Manufacturer #: 4036ER2004A
If you notice your washing machine is leaking water from the top of the transmission, it might be due to the gasket being damaged or worn down. When replacing your gasket, consider replacing your tub ...
$29.44
  In Stock
Tub-to-Pump Drain Hose – Part Number: 4738ER1002A
Tub-to-Pump Drain Hose
★★★★★
★★★★★
(14)
PartSelect #: PS3523345
Manufacturer #: 4738ER1002A
This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to th...
$37.38
  In Stock
Door Gasket – Part Number: 4986ER0004F
Door Gasket
★★★★★
★★★★★
(23)
PartSelect #: PS3524977
Manufacturer #: 4986ER0004F
Also known as a door boot seal or bellow and comes with a drain hole. Door boot 4986ER0004F is an original equipment manufacturer (OEM) part that fits some front-load washers in these series: Kenmore ...
$65.22
  In Stock
Door Lock Assembly – Part Number: EBF49827801
Door Lock Assembly
★★★★★
★★★★★
(22)
PartSelect #: PS3533609
Manufacturer #: EBF49827801
The door lock assembly is a part for your washing machine and tells the washer that the door is closed and locked into place. If the switch has shorted out and not locking, it is no longer delivering ...
$61.87
  In Stock
Detergent Dispenser – Part Number: 3891ER2003A
Detergent Dispenser
★★★★★
★★★★★
(17)
PartSelect #: PS3522644
Manufacturer #: 3891ER2003A
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
$28.68
  In Stock
Gasket – Part Number: 4036ER4001B
Gasket
★★★★★
★★★★★
(6)
PartSelect #: PS3522859
Manufacturer #: 4036ER4001B
This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two sections of the tub,...
$29.44
  In Stock
Rotor Position Sensor Assembly – Part Number: 6501KW2002A
Rotor Position Sensor Assembly
★★★★★
★★★★★
(18)
PartSelect #: PS3529186
Manufacturer #: 6501KW2002A
This is a replacement sensor assembly for your washer. It may also be known as a motor rotor position sensor. The sensor assembly monitors the direction and speed of the spinning rotor and communicate...
$33.71
  On Order
BEARING,BALL – Part Number: 4280EN4001C
BEARING,BALL
★★★★★
★★★★★
(4)
PartSelect #: PS7785069
Manufacturer #: 4280EN4001C
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, th...
$45.42
  In Stock
Shock Absorber Kit – Part Number: 383EER3001J
Shock Absorber Kit
★★★★★
★★★★★
(4)
PartSelect #: PS3522313
Manufacturer #: 383EER3001J
This kit includes 1 shock absorber and 2 pins.
$27.17
  In Stock

Questions And Answers for WM2233HW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the WM2233HW

[Viewing 17 of 17]
Leaking
Fixed by
these parts
Show All
Will not drain
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Will not stop filling with water
Fixed by
these parts
Show All
Pumps but will not spin
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Will not fill with water
Fixed by
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
Show All
Will not agitate
Fixed by
these parts
Show All
Burning smell
Fixed by
these parts
Show All
Lid or door will not open
Fixed by
these parts
Show All
Engine runs but does not pump water
Fixed by
these parts
Show All
No hot or cold water
Fixed by
these parts
Show All
Spins slowly
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washing maching wouldn't drain
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Parts Used:
Washing Machine Drain Pump and Motor Assembly
  • Jorge from Apple Valley, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
539 of 683 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LE Error Message and won't spin drum properly
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was the likely cause of the failure. I replaced that and everything works great now. And now I have a spare main board in case that ever fails. I also want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener caused a lot of mildew to form inside the dispenser directly above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to keep the mildew from forming.
Parts Used:
Rotor Position Sensor Assembly
  • Mark from Harrisburg, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
223 of 289 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Parts Used:
Tub-to-Pump Drain Hose
  • Leslie from STOWE, VT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
41 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!