Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WD-3243RHD > Parts

WD-3243RHD LG Washer Dryer Combo - Parts

All parts for the LG Washer Dryer Combo WD-3243RHD

Below is a list of all parts for the LG Washer Dryer Combo WD-3243RHD - WASHER/DRYER COMBINATION. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WD-3243RHD
1-14 of 98
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$69.64

Drain Pump and Motor Assembly

The drain pump and motor assembly may also be known as the washer drain pump, and is a part for your washer. The function of this assembly is to help expel water from the washing m...

$22.05

Water Inlet Valve - Hot

The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test your valve, unplug the washer when the symptom occurs. If the washer continues to fill, then your inlet valve is defective. This part is approximately 3 inches long x 3 inches wide.

$13.88

Locking Pin

This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in...

$26.42

BEARING,BALL

This bearing, or ball, is a genuine OEM replacement part for your washer. The bearing allows the tub to rotate smoothly. Replacing this part can be helpful if your washer is extremely loud, or vibrates excessively. Sometimes the seal can fail, allowing water to leak into the bearings. Often you will need to replace the inner and outer bearings, as well as the seal, at the same time.

$4.35

Cap,Drain Hose

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from yo...

$22.05

Bearing,Ball

Tub bearing supports the spin basket shaft at the bottom of the washer tub. If your tub bearings are damaged or faulty, the washer will run noisier than usual during the spin cycle. Tub bearings are meant to ensure free movement of the wash basket. In top-loading washers, there will typically be two bearings: one where the shaft connects to the clothes basket and one at the bottom or transmission input. In front-loading washers, both bearings will be supporting the clothes basket shaft at the back of the outer tub. The bearings have an outside diameter of approximately 3 inches.

$28.71

Sensor Assembly

$4.35

Clamp

$4.35

Holder

$5.72

Bolt Assembly

$11.85

Thermistor,NTC

$28.71

Switch Assembly,Pressure

$26.70

LEG ASSEMBLY

$4.35

Gasket

All Parts for the WD-3243RHD
1-14 of 98