Models
>
WBB24756GB
WBB24756GB ((10)) Bosch Washer - Overview
Sections of the WBB24756GB
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Washer Door Boot Gasket
PartSelect #: PS8732872
Manufacturer #: 00667487
This door boot is for washers. Door boot forms a seal between the wash tub and the door, preventing leaks.
$83.15
In Stock
Shipping Bolt with Spacer
PartSelect #: PS8697774
Manufacturer #: 00175724
Front-loading washing machines use a suspension system to support the tub during the wash cycle. This suspension system is only designed to handle a certain amount of movement, so when you are transpo...
$18.12
In Stock
Washer Drive Belt
PartSelect #: PS8722578
Manufacturer #: 00491680
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
No Longer Available
Shock Absorber
PartSelect #: PS8729758
Manufacturer #: 00642112
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
$61.53
In Stock
Questions And Answers for WBB24756GB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WBB24756GB
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The sleeves on this model washer are two different sizes see below
The thickness of the sleeves are 3.0 mm thick on the base of the sleeve. However the sleeve on the bottom of both the upper and lower hinges of this model washer are different sizes. The base of the sleeve on the top of each hinge post is 3.0 mm but the sleeve on the bottom post of each hinge is only 1.2 mm thick. The bracket on the d
... Read more
oor that holds all 4 screws to attach the door to the washer will not fit unless you reuse the old sleeve from the lower posts or reduce the thickness of the disc on the lower post to 1.2 mm. I spent hours trying to get the door back on and finally saw why I couldn't get the screws back in because the bracket could not go in place and sit flush the the washer.
Read less
Parts Used:
-
David from ENTERPRISE, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!