WA484DSHASU Samsung Washer - Overview

Sections of the WA484DSHASU

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Drain Pump Assembly - 120V 60Hz – Part Number: DC31-00054A
Drain Pump Assembly - 120V 60Hz
★★★★★
★★★★★
(17)
PartSelect #: PS4204638
Manufacturer #: DC31-00054A
This is a 120 volt, 60 hertz drain pump assembly for a washing machine. It is a genuine OEM part. This pump helps expel water from the washing machine, and is activated after the spin speed is maintai...
$162.61
  In Stock
Inlet Hose - 5 FT – Part Number: WP89503
Inlet Hose - 5 FT
★★★★★
★★★★★
(3)
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$21.51
  In Stock
Screw - Tapping – Part Number: 6002-000213
Screw - Tapping
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$4.66
  In Stock
Call (800) Samsung – Part Number: CALL_1-800-SAMSUNG
Call (800) Samsung
PartSelect #: PS17019800
Manufacturer #: CALL_1-800-SAMSUNG
  No Longer Available
Pulsator Bolt – Part Number: DC60-40133A
Pulsator Bolt
★★★★★
★★★★★
(1)
PartSelect #: PS4205362
Manufacturer #: DC60-40133A
$16.62
  In Stock
Drain Cap – Part Number: DC61-10673A
Drain Cap
PartSelect #: PS4207510
Manufacturer #: DC61-10673A
This drain cap is a genuine replacement part made for Samsung washers. It is a small plastic cap, approximately 1.5 inches long, that fits onto the end of the washing machine drain hose. The cap is re...
$4.66
  In Stock
Hall Sensor BLDC Motor Assembly – Part Number: DC31-00098A
Hall Sensor BLDC Motor Assembly
PartSelect #: PS4204673
Manufacturer #: DC31-00098A
$78.63
  In Stock
Tapping Screw – Part Number: 6002-000630
Tapping Screw
PartSelect #: PS4133229
Manufacturer #: 6002-000630
$4.66
  In Stock
Washer Wave – Part Number: DC60-60011B
Washer Wave
PartSelect #: PS4205405
Manufacturer #: DC60-60011B
$15.40
  In Stock
Pulsator Bolt – Part Number: DC60-50003A
Pulsator Bolt
★★★★★
★★★★★
(1)
PartSelect #: PS4205376
Manufacturer #: DC60-50003A
$34.57
  On Order
Outer Front Tub Bracket – Part Number: DC61-00201A
Outer Front Tub Bracket
PartSelect #: PS4205685
Manufacturer #: DC61-00201A
$9.44
  In Stock
Clamper Hose – Part Number: DC65-00008B
Clamper Hose
PartSelect #: PS8763766
Manufacturer #: DC65-00008B
$13.03
  In Stock

Questions And Answers for WA484DSHASU

Be the first to ask our experts a question about this model!

Common Symptoms of the WA484DSHASU

[Viewing 2 of 2]
Will not drain
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Code indicating washer was NOT discharging water
Watched the video, procedure was simple and as depicted on the video. Started by using a wet shop Vac to the discharge hose and sucked as much dirty wash water out as possible. Removed the pump,and found the motor did not turn freely. Removed the motor (3 screws) and replaced the motor with new part. Reassembled the washer, everything worked as it should. After about 3-4 loads of laundry, the "Not Draining" code / problem returned. Again, sucked out the water with the Shop Vac. Checked the Filter /Cleanout and found it completely packed with MUD. Cleaned that out, and again disassembled the washer. The pump was removed and the remaining muddy gunk was cleaned from the impeller. The 3 drain lines that attached to the pump were inspected for blockage/obstruction and flushed of any muddy residue. Reassembly was quick and easy, and the washer has worked well since. I have no idea how the dirt got into the system with enough dirt to gunk up the system. Recommend keeping more frequent inspections of the cleanout trap.
Parts Used:
Drain Pump Assembly - 120V 60Hz
  • SCOTT from VERNAL, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water inlet hoses.
Removed the old hoses and screwed on the new hoses.
Parts Used:
Inlet Hose - 5 FT
  • Helen from NASHUA, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The nut (referred to as spin nut or hexagon nut) which holds the tub to the motor broke into multiple pieces.
NOTE: this repair requires OEM part number DC60-50003A and what was originally provided was 6021-001573. This is important as Part Select has this mixed in their Database and I made them aware.

Otherwise once you have the correct part the repair is simple. Open the top of the washer and remove the pulsator cap, there is a 10mm bolt which is removed next, the pulsator pan (believe this is correct) can be removed with a flat head screw driver. Do so by placing the screw driver in one of the groves by where the bolt was. Once this is removed that is where this part will be. I didn’t have to remove since mine was in pieces but it comes off/goes on counter clockwise. Repeat steps to put everything back together.
Parts Used:
Pulsator Bolt
  • Josh from UNION, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!