Models > WA45H7000AW > Instructions

WA45H7000AW Samsung Washer - Instructions

All Instructions for the WA45H7000AW
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The cap came off somehow
Just snapped on part in the center of tub where it belongs
Parts Used:
PULSATOR-CAP
  • James from GALLATIN, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer stopping in the rinse and spin cycle
Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.
Parts Used:
Motor hall sensor
  • Gary from CENTER HARBOR, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain hose was cracked and leaking.
Squeezed clamp with fingers to remove old drain hose. Put clamp on new replacement hose and slid over drain pipe and released clamp. Less than a minute. Hose was exact replacement part.
Parts Used:
Assembly HOSE(O);HUDSON WASH
  • Richard from HERNANDO, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pulsator- Cap, two of three that that attach the cap the the tub were broken off.
Snapped the replacement cap in place.
Parts Used:
PULSATOR-CAP
  • Michael from ROCKFORD, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pusator-cap was missing - Kids swore they didn't do it
Insert Tabs A into Slots B. Twist.
Parts Used:
PULSATOR-CAP
  • John from LA MIRADA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pulsator cap pins broke off leaving the screw head exposed.
Nothing to it, just aligned the three pins on the new cap and gently
pushed down.
Parts Used:
PULSATOR-CAP
  • Bonnie from Houston, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy instal, taking off entire back panels of appliance is required
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine.
Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install pump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Parts Used:
Washer Drain Pump Assembly
  • Dieter from CHICAGO, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WA45H7000AW
1 - 7 of 7